Abstract:In this paper, a new symmetrical adaptive variable admittance control is proposed for position/force tracking of dual-arm cooperative manipulators. Thanks to this control approach, the dual-arm cooperative manipulator is able to track a dynamic desired force and compensate for the unknown trajectory deviations, resulted from in terms of external disturbances and calibration errors. An object-oriented motion planning approach for dual-arm cooperative manipulators is adopted firstly, the motion of the single arm in the system is computed via closed-chain constrains. The trajectory deviations from external disturbance and calibration errors are considered, which will lead existing unknown external forces and internal forces to the closed-chain system. In particular, the modeling of closed-chain which including dual-arm and object is analyzed. According to the principle of ”nonsqueezing” pseudoinverse, the forces acting on the center of the object are decomposed into external and internal forces. Furthermore, the external and internal forces are transformed to the tip of the object by load distribution strategy. To track the desired position and forces, a symmetrical adaptive variable admittance control for dual-arm coordination is achieved for the first time by adjusting the admittance parameters on-line based on the tracking error to compensate the unknown trajectory deviations. In the end, the developed control scheme is experimentally tested on a dual-arm setup composed of two ESTUN industrial manipulators carrying a common object. The simulations and experimental results strongly prove that the proposed approach can achieve good position/force tracking performance.

Event-triggered adaptive backstepping admittance control for cooperative manipulation

Adaptive control for networked uncertain cooperative dual-arm manipulators: an event-triggered approach

Admittance-Based Adaptive Cooperative Control for Multiple Manipulators With Output Constraints

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Symmetrical adaptive variable admittance control for position/force tracking of dual-arm cooperative manipulators with unknown trajectory deviations

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Adaptive coordinated control of multiple manipulators handling a constrained object

Event-triggered-based adaptive command-filtered asymptotic tracking control for flexible robotic manipulators

Cooperative Tracking Control for Nonlinear MASs under Event-Triggered Communication.

Distributed Neural Adaptive Impedance Control for Cooperative Manipulation With Unknown Objects

Adaptive backstepping sliding mode subject-cooperative control for a pediatric lower-limb exoskeleton robot

Adaptive task‐space cooperative tracking control for manipulators with a desired trajectory estimator and a velocity observer

Adaptive Admittance Control for Safety-Critical Physical Human Robot Collaboration

Decentralized Ability-Aware Adaptive Control for Multi-robot Collaborative Manipulation

A model free adaptive‐robust design for control of robot manipulators: Time delay estimation approach

Brief paper: Adaptive robust coordinated control of multiple mobile manipulators interacting with rigid environments

Approximation-Based Admittance Control of Robot-Environment Interaction With Guaranteed Performance

The Adaptive Bilateral Control of Underwater Manipulator Teleoperation System with Uncertain Parameters and External Disturbance

A Model Weighted Adaptive Neural Backstepping Sliding-Mode Controller for Cooperative Manipulator System

Adaptive Control of Robotic Manipulators with Unified Motion Constraints

Adaptive hybrid impedance control for dual-arm cooperative manipulation with object uncertainties