Abstract:Titanium matrix composites (TMC) have potential applications in the aerospace industry because of their excellent performance. The comprehensive performance of TMC mainly depends on the matrix, reinforcement and interface characteristics. Hence, this study discussed the knowledge of microstructure-property relationships in detail. Crack-free high-mass-proportion TiCp/Ti6Al4Vcomposites were successfully prepared by directed energy deposition (DED). As the TiCp mass fraction increasing from 0 to 50%, the quantity of primary TiC and unmelted TiC (UMT) increased. Meanwhile, the refined α-Ti in the composites had a relatively weak texture. In addition, the interface between primary TiC and α-Ti was a semi-coherent interface, exhibiting a <math>112-0</math> α-Ti // [110]TiC, <math>1-100</math> α-Ti // <math>1-11</math> TiC orientation relationship, which facilitated the heterogeneous nucleation of Ti and improved bonding of primary TiC with the matrix. With the increase in microhardness taking the form of a cubic function, the wear mechanism was found to transform from abrasive wear to slight delamination wear. Due to the fact that both UMT and primary TiC bonded well with Ti64 matrix, they shared partial friction to protect matrix from severe abrasion, resulting in an excellent wear resistance of composites. Moreover, the thermal conductivity of 50% TiCp/Ti6Al4V was 9.063 <math>W∙m-1∙K-1</math>, which was nearly 26.5% higher than that of Ti6Al4V. Owing to the premature cracking of brittle UMT and dendritic TiC, the tensile strength and elongation of the composite with 50% TiCp were 515.5 MPa and 1.83%, which decreased by 45.8% and 78.8%, respectively. Adding a high proportion of TiCp can significantly improve the hardness and wear resistance of TMC, whereas it is detrimental to the tensile performance of TMC. The study have significant implications for the design of novel TMC, particularly for the aerospace industrial applications.

Ultrasonic Vibration-Assisted Laser Directed Energy Deposition of B4C-Ti Composite: Effect of Laser Power and Ultrasonic Vibration

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

Fabrication of a TiC-Ti Matrix Composite Coating Using Ultrasonic Vibration-Assisted Laser Directed Energy Deposition: The Effects of Ultrasonic Vibration and TiC Content

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

New insights into the microstructural evolution and properties of (TiB+TiC)/Ti–6Al–4V composite via laser directed energy deposition using B 4 C nanoparticles

Microstructure evolution and underlying thermal behavior of high-content TiC reinforced titanium matrix composites fabricated by laser directed energy deposition

Microstructure and mechanical properties of in-situ B 4 C reinforced TC4 composites prepared by laser melting deposition

Microstructure and Wear Resistance of TiCp/Ti6Al4V Composite Coatings by Follow-Up Ultrasonic-Assisted Laser Additive Manufacturing

High-mass-proportion TiCp/Ti6Al4V titanium matrix composites prepared by directed energy deposition

Investigations of the microstructure and performance of TiCp/Ti6Al4V composites prepared by directed laser deposition

Formability, densification behavior and hierarchical grain structure of laser-directed energy deposition of TiB reinforced titanium matrix composites

Effect of Ti Doping on the Mechanical Properties of B4C Composite Ceramics

Effect of laser additive manufacturing on the microstructure and mechanical properties of TiB2 reinforced Al-Cu matrix composite

Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite

Network structured nano-TiB/Ti composites coating on Ti64 alloy with improved wear properties by direct laser deposition

Construction of Three-Dimensional Network Morphology Titanium Matrix Composites Via Adding Nano B4C: As-built and Heat-Treated Scenarios

Microstructure and mechanical properties of in-situ hybrid reinforced (TiB+TiC)/Ti composites prepared by laser powder bed fusion

Study on microstructure and tribological properties of nano/micron TiC/TC4 composites fabricated by laser melting deposition

In-situ Synthesized TiC/TiB Ceramic Particle Composite Coating by Laser Cladding on TC4 Titanium Alloy

Microstructure and wear resistance of laser clad composite coating on TC4 titanium alloy surface

Pulsed Plasma Surfacing of Titanium Matrix Cermet Based on B4C