Abstract:Pancreatin pellets, placebo pellets and tablets containing vitamin B2 were coated with various aqueous and organic enteric polymers, HPMCAS, HP, Eudragit L 100-55, Eudragit L 30 D-55, CAP, CAT, CMEC and PVAP, comparatively investigated and tested for storage stability. With the exception of Eudragit L 100-55 and Eudragit L 30 D-55, higher amounts of coating material were needed to achieve gastro-resistance with aqueous coating than with organic coating. Film formation from aqueous dispersions of micronized HP 55 was affected by the degree of micronization and was improved by reducing the particle size of the polymer. Undercoating was another suitable measure to decrease the amount of coating material required. The choice of plasticizer was of special importance in the aqueous dispersions, and type and quantity must be appropriate for the polymer applied. Non-polymeric plasticizers such as triethyl citrate (TEC) evaporated along with water during the spraying or drying process and high temperatures promoted such losses. The moisture-sensitive pancreatic enzymes were damaged both by humidity and heat during aqueous coating. The extent of damage was dependent on the coating equipment used. Upon storage, coatings obtained from aqueous dispersions showed changes in enteric performance or release characteristics as a consequence of three chemical/physical mechanisms: hydrolysis of ester linkages in the polymer or plasticizer, evaporation of the plasticizer, delayed film formation. The active ingredient pancreatin induced hydrolysis of the ester based film-former hydroxypropyl methylcellulose acetate succinate (HPMCAS). However, even without the influence of enzymes, the phthalic ester groups of aqueous hydroxypropyl methylcellulose phthalate (HP) were partly cleaved after 11 months storage. In HPMCAS-coated pancreatin pellets, the plasticizer glyceryl triacetate was almost completely hydrolyzed by the enzymes, whilst triethyl citrate was lost by evaporation through permeable packaging material at elevated temperatures. Open storage at elevated temperatures and humidities caused changes in the surface structure of HPMCAS coatings, consisting of a smoothing of the originally somewhat porous film and sticking. When applied to vitamin B2 tablets, Eudragit L 100-55, Opadry enteric (PVAP) and Aqoat (HPMCAS) proved to be quite stable aqueous enteric coatings, whereas cellulose acetate phthalate CAP or cellulose acetate trimellitate CAT coatings as ammonia-neutralized aqueous solution or as water-based pseudolatex Aquateric were unstable when stored under stress conditions.

Effect of Storage on the Properties of Acetylsalicylic acid Tablets Coated with Aqueous Hydroxypropyl Methyl-Cellulose Dispersion

Evaluation of the Pharmaceutical Characteristics of Various Enteric-Coated Aspirin Tablets under Different Storage Conditions

Delayed Sustained Drug Release from Electrostatic Powder Coated Tablets with Ultrafine Polymer Blends

Influence of aqueous coatings on the stability of enteric coated pellets and tablets

Effect of the molecular mobility of water adsorbed by disintegrants on storage-induced hydrolytic degradation of acetylsalicylic acid incorporated into tablets under humid conditions

Impact of Amylose-Amylopectin Ratio of Starches on the Mechanical Strength and Stability of Acetylsalicylic Acid Tablets

Changes in Tablet Color Due to Light Irradiation: Photodegradation of the Coating Polymer, Hypromellose, by Titanium Dioxide

Stability study of ambroxol hydrochloride sustained release pellets coated with acrylic polymer

Talc concentration effect on shelf life of acetaminophen tablets

Impact of immediate release film coating on the disintegration process of tablets

Hyperspectral and Microtomographic Analyses to Evaluate the Stability of Quercetin and Calcium Effervescent Tablets Exposed to Heat and Ultraviolet Radiation

Diclofenac Sodium Stability in Simulated Gastrointestinal Fluids and the Use of MCM-41 Silica Carrier with Surface Modification to Achieve Innovative Delayed Release

The Effect of Cooling on the Degree of Crystallinity, Solid-State Properties, and Dissolution Rate of Multi-Component Hot-Melt Extruded Solid Dispersions

Effect of tableting temperature on tablet properties and dissolution behavior of heat sensitive formulations

A Comparison of the Effect of Temperature and Moisture on the Solid Dispersions: Aging and Crystallization.

Osmotic tablet coatings: Drying stress, mechanical properties and microstructure

Unveiling tablet structural changes: A micro computed tomography analysis of aqueous coating effects

Effect of Spray Drying on Phenolic Compounds of Cranberry Juice and Their Stability During Storage

Stability of Abuse-deterrent properties of PEO-based Abuse-deterrent formulation

Effects of Polyol Excipient Stability During Storage and Use on the Quality of Biopharmaceutical Formulations

Stability Study of Thermo-reversible Acid-buffering Contraceptive Gel