Abstract:The problem of isothermal (slow) drying of a porous medium in the form of a square bluff body resting on a flat surface while being exposed to turbulent air flow is investigated in this paper. The porous medium is represented by a pore-network model consisting of a network of volume-less nodes connected to each other via narrow throats. As the air flows past the water-saturated network, the water evaporates in the network and the evaporated water vapors diffuse through the air inside the network to advect away in the outside domain. In the history of such simulations coupling the ‘outside–inside’ processes during drying, this paper investigates, for the first time, the effect of turbulent flow on drying of a porous medium after coupling the outside-the-network flow and transport with the inside-the-network drying and liquid redistribution. Also, a commercial software package is used for the first time to obtain the outside flow. The water redistribution inside the network is predicted by the invasion-percolation algorithm after assuming the dominance of capillary forces over viscous and gravity forces. The outside velocity field is first obtained using the k-ε$$k\hbox {-}\varepsilon $$ model in ANSYS Fluent package. Then, the velocity field is used in a finite-volume-based code in order to solve for mass transfer outside the network using the regular convective-diffusive species transport equation. The drying mechanism and vapor transport inside the pore network is coupled with the outside mass-transfer simulation by considering a flux-balancing condition at the top surface of the network. After achieving grid independence and demonstrating the suitability of the no-slip boundary condition for the network top, the effects of the outside-flow Reynolds number and different turbulent flow models on several global drying parameters such as evaporation or drying rate, cumulative drying time, and top-surface saturation were studied. The resistance to vapor transport within the network was observed to dominate the enhanced vapor transport outside the network through the use of turbulent flow. Though the effect of variations in the network throat-size distribution upon saturation distribution within the network was found to be significant, its effect on the drying rate evolution was minimal. The concentration boundary layer thickness, which is employed to set the mass-transfer boundary condition in pore-network simulations and has been hitherto taken as constant in the literature, was found to change not only with position on the network top, but was also found to decline with time due to the drying of the network top.

A fully implicit coupled pore-network/free-flow model for the pore-scale simulation of drying processes

A dynamic and fully implicit non‐isothermal, two‐phase, two‐component pore‐network model coupled to single‐phase free flow for the pore‐scale description of evaporation processes

A Hybrid-Dimensional Coupled Pore-Network/Free-Flow Model Including Pore-Scale Slip and Its Application to a Micromodel Experiment

Pore-to-mesoscale Network Modeling of Heat Transfer and Fluid Flow in Packed Beds with Application to Process Design

Pore-scale simulation of drying in porous media using a hybrid lattice Boltzmann: pore network model

Drying of Porous Materials at Pore Scale Using Lattice Boltzmann and Pore Network Models

Convective Drying of Porous Media: Comparison of Phase-Field Simulations with Microfluidic Experiments

Drying of porous media by concurrent drainage and evaporation: A pore network modeling study

Drying in nanoporous media with Kelvin effect: Capillary imbibition against evaporation by smoothed particle hydrodynamics method

Pore network model of drying with Kelvin effect

Pore-Scale Study on Convective Drying of Porous Media

Achieving the Inside–Outside Coupling During Network Simulation of Isothermal Drying of a Porous Medium in a Turbulent Flow

A Dynamic Pore-Scale Network Model for Two-Phase Imbibition

Coupled Finite-Volume Model for 2D Surface and 3D Subsurface Flows

Fully Coupled Implicit Hydro-Mechanical Multiphase Flow Simulation in Deformable Porous Media Using DEM

Coupled Hydrothermomechanical Modeling of Unsaturated Porous Materials

Numerical modeling of drying from saturated to unsaturated conditions with two-phase partitioning boundaries at the medium surface and interface-dependent phase change

Model reduction for coupled free flow over porous media: a hybrid dimensional pore network model approach

Dissipative particle dynamics simulation of pore-scale multiphase fluid flow

An Improved Pore-Network Model Including Viscous Coupling Effects Using Direct Simulation by the Lattice Boltzmann Method

Multiphase Flow Modelling in Multiscale Porous Media: An Open-Sourced Micro-Continuum Approach