Abstract:Conformal cooling is a promising approach for reducing the cycle time and providing efficient cooling in injection moulding. Evaluating the effectiveness of the cooling performance would ideally be achieved via real-time data collection, facilitated by in-mould sensors. However, due to the limited space caused by the presence of conformal channels, embedding the sensors in optimal locations is difficult. The design flexibility of additive manufacturing (AM) for manufacturing complex internal geometries offers opportunities for unique solutions to overcome both cooling and sensorisation challenges presented by traditional manufacturing techniques. In this study, straight-drilled cooling channels are replaced with conformal cooling channels, in a mould for a complex industrial component with variable thin and thick-walled sections. The Selective Laser Sintering (SLS) technique was implemented to additively manufacture sensorised mould inserts incorporating conformal channels as well as curved channels for the targeted placement of flexible thermocouples. These sensorised mould inserts, with conformal channels, were tested in an industrial injection moulding machine, and their performance was compared to the conventional mould inserts using in-mould thermocouple data. The experiment findings revealed that the application of conformal cooling reduced the production cycle time by around 50 % and resulted in better component quality compared to conventional methods. Also, thermocouple readings confirmed temporal trends observed in earlier simulation results, indicating the elimination of hotspot regions, and achieving a more uniform temperature distribution through the use of conformal cooling. The in-mould temperature data provides real-time information on the cooling process at critical points of the component, which can be exploited for more accurate optimisation of the cycle time and ejection temperature. Moreover, the flexible thermocouples in curved channels successfully measured the mould temperature and the effect of coolant on the mould insert at two separate locations of the additively manufactured mould inserts.

Advances in infrared technology for the online monitoring of injection moulding: application to the understanding of the nature of contact at the polymer—mould interface

In-situ ultrasonic measurement of molten polymers during injection molding

On-line in-mold transducer in injection molding

Ultrasound Sensors for Process Monitoring in Injection Moulding

A Nondestructive Online Method for Monitoring the Injection Molding Process by Collecting and Analyzing Machine Running Data

Development of A Transducer for In-Line and Through Cycle Monitoring of Key Process and Quality Variables in Injection Molding

In-Line Chemical Composition Monitoring for the Injection Molding Process of Biodegradable Polymer Blends Using Simultaneous Measurement of Near-Infrared Diffuse Reflectance and Transmission Spectra

In-Mold Sensors for Injection Molding: On the Way to Industry 4.0

Monitoring the resin infusion manufacturing process under industrial environment using distributed sensors

Exploiting temperature measurements for cure monitoring of FRP composites—Applications with thermocouples and infrared thermography

Visualization and Monitoring of the Injection Molding Process Using Ultrasonic Phased Array

In situ flow state characterization of molten resin at the inner mold in injection molding

Industrially relevant injection moulding apparatus for in situ time-resolving small-angle X-ray scattering measurements

An Edge-Filtered Optical Fiber Interrogator for Thermoplastic Polymer Analysis

Polymer/mold interfacial heat transfer during injection molding

Precision injection moulding of micro components: Determination of heat transfer coefficient and precision process simulation

Sensorised metal AM injection mould tools for in-process monitoring of cooling performance with conventional and conformal cooling channel designs

An Automatic, Contactless, High-Precision, High-Speed Measurement System to Provide In-Line, As-Molded Three-Dimensional Measurements of a Curved-Shape Injection-Molded Part

Investigation of Product and Process Fingerprints for Fast Quality Assurance in Injection Molding of Micro-Structured Components

Evaluating the Injection Moulding of Plastic Parts Using In Situ Time-Resolved Small-Angle X-ray Scattering Techniques

Assisted defect detection by in-process monitoring of additive manufacturing using optical imaging and infrared thermography