Effect of water content on the mechanical properties of an artificial porous rock

Liyuan Jiang,Ying Xu,Bingqi Chen,Bangbiao Wu
DOI: https://doi.org/10.1007/s10064-021-02402-3
IF: 4.2
2021-08-09
Bulletin of Engineering Geology and the Environment
Abstract:Water content significantly affects the mechanical properties of porous rocks, for which both clay content and rock microstructure have been identified as main controlling factors. To study the influence of microstructure on the water effect on rock properties, artificial porous rock (APR) is made by heating Fangshan granite (FG). The mineral composition and microstructure of the thermally treated FG were determined, and 1000 °C was chosen as the treatment temperature to fabricate the APR. APR specimens with various water saturations (100%, 80%, 60%, 40%, 20%, and 0%) were prepared by drying fully saturated APR specimens. The quasi-static responses of the APR specimens during uniaxial and triaxial compression (with confining pressures of 5 MPa and 10 MPa) experiments were obtained. The results show that the uniaxial compressive strength (UCS) of the APR slightly increases with increasing water saturation from dry (0% saturation) to 60% saturation, and the cohesion shows a similar trend. However, the triaxial compressive strength decreases with increasing water saturation. The cohesion and internal frictional angle were obtained from the compression tests, and their dependence on the saturation was revealed, which can be explained by the interaction of the water and the rock microstructure.
engineering, environmental,geosciences, multidisciplinary, geological
What problem does this paper attempt to address?