Hydraulic Conductivity of Sand/Biopolymer-Amended Bentonite Backfills in Vertical Cutoff Walls Permeated with Lead Solutions
Xian-Lei Fu,Sheng-Qiang Shen,Krishna R. Reddy,Yu-Ling Yang,Yan-Jun Du
DOI: https://doi.org/10.1061/(asce)gt.1943-5606.0002737
IF: 3.9
2021-12-10
Journal of Geotechnical and Geoenvironmental Engineering
Abstract:This study investigated the hydraulic conductivity and microscopic properties of two backfills, conventional sand/bentonite (SB) and sand/xanthan gum (XG)-amended bentonite/sand (XG-SB), for use in vertical cutoff walls for controlling lateral migration of lead-contaminated groundwater. A series of laboratory experiments were conducted on the two backfills to assess slump height, specific gravity, liquid limit, and hydraulic conductivity using distilled water, tap water, and lead nitrate [Pb(NO3)2] solutions at different concentrations. The results showed that the moisture content corresponding to the target slump height was higher for XG-amended backfill as compared with unamended backfill. XG amendment slightly decreased specific gravity ( Gs ), but substantially increased liquid limit ( wL ) of the backfill. An increase in concentration of Pb(NO3)2 solution increased Gs , but decreased wL for both unamended and XG-amended backfills. The hydraulic conductivity ( k ) of both backfills increased with increasing concentrations of Pb(NO3)2 solutions. XG-amended backfill hydraulic conductivity ( k ) was found to be less than 10−9 m/s regardless of type of permeating liquid, whereas unamended backfill k was found to be higher than 10−9 m/s when permeated with Pb(NO3)2 solutions. Scanning electron microscopy (SEM) coupled with energy-dispersive spectrometry (EDS) analyses indicated that XG hydrogels filled the intergranular pores of XG-amended backfill and formed a thin coating over the bentonite particles and bentonite-coated sand granules. The X-ray diffraction (XRD) results showed no intercalation of XG into montmorillonite platelets. The zeta potential of XG-amended bentonite was higher negative relative to unamended bentonite. The microscopic properties elucidated the mechanisms for superior hydraulic performance of XG-amended backfill. A comprehensive comparison of k for conventional backfill and polymer-amended backfills based on this study and previously published studies revealed that the bentonite content, bentonite type, effective confining stress, and cation concentration of a permeating liquid can significantly affect the k of the backfills.
geosciences, multidisciplinary,engineering, geological