How project management helped the B‐2 Stealth Bomber to take off

Gail Bowen

DOI: https://doi.org/10.1108/eb037581

1995-04-01

Aircraft Engineering and Aerospace Technology

Abstract:For more than 15 years, 6,000 companies and over 40,000 people worked together to design, develop and produce the B‐2 Stealth Bomber, the United States' futuristic bombing machine.

engineering, aerospace

What problem does this paper attempt to address?

Future Air Force systems

S A Tremaine

Abstract:Planning for the future is under way in earnest at the Aeronautical Systems Division (ASD) at Wright-Patterson Air Force Base. It has been statistically established that it takes from 14-16 years from the generation of a new system idea to enter into engineering development. With this unpleasing, but realistic, schedule in mind, ASD has, during the last 3 years, been initiating long-term planning projects that are pre-starts for new system ideas. They are generated from throughout the Air Force and are locally managed and funded. Through this process, which spans from 12-14 months, specific and revolutionary new ideas for the systems of the future are generated. This article addresses more than a dozen specific new ideas in work at ASD today. These ideas range from a need to replace the C-130 type aircraft after the year 2000 to planning a follow-on to the B-18 well into the 21st century. Among other specific projects are investigation into an immortal fighter intended to be free of reliability and maintenance demands for an especially long period of operation, a new training system and advanced trainer to replace the T-38, a transatmospheric vehicle that could operate in the 100,000-500,000 foot flight region (30,480-152,400 m), and a new means of defending against hostile cruise missile launchers and cruise missiles. Other ideas are also addressed. The article concludes with emphasis on systems that can operate hypersonically in and out of the known atmosphere and greater use of airbreathing propulsion systems operating between Mach 3 and Mach 6.
Optimizing Obscurity: Advancing Stealth Capabilities and Performance of BWB Fighter with Symmetric Supercritical Airfoils

Pradyumna Rangnath Surwase

DOI: https://doi.org/10.61359/11.2106-2443

2024-08-30

Abstract:The F-22 Raptor is widely recognized as the most dominant aircraft on the battlefield due to its unparalleled stealth characteristics. However, in terms of overall performance, it is not the best. The current article proposes the design of a next-generation blended wing body (BWB) aircraft. A key motivation for using a symmetrical supercritical airfoil is the research gap identified in the literature. This design also incorporates novel approaches such as short take-off and landing capabilities and a dual combustor engine, which are expected to significantly enhance performance characteristics. The double delta wing structure, combined with the BWB design, plays a crucial role in optimizing aerodynamics. Stealth aspects are further improved through the use of advanced coatings and radar cross-section (RCS) reduction techniques. Additionally, the integration of artificial intelligence (AI) brings cutting-edge advancements to aircraft functionalities, while the incorporation of a biometric nosecone ensures that this aircraft represents the next generation in aviation technology.
The Shaping of Nuclear Weapon System Technology: US Fleet Ballistic Missile Guidance and Navigation: I: From Polaris to Poseidon

Donald MacKenzie,Graham Spinardi

DOI: https://doi.org/10.1177/030631288018003002

1988-08-01

Social Studies of Science

Abstract:This paper (published in two Parts) presents a detailed historical case study of the evolution of the Polaris, Poseidon and Trident weapons programmes, and of the development of the guidance and navigation technologies which are essential to their role in nuclear strategies. Over the last thirty years, these technologies have changed in the direction of greatly increased missile accuracy. Simultaneously, the strategic rationale of these weapons has shifted from that of ultimate retaliatory `counter-city' deterrent (the main perceived role of Polaris) to `counterforce' targeting of opposing silos and command posts (a major role of Trident II). Has technological change been an independent causal factor in this sequence, bringing into being a new strategy, or is technological change the consciously intended product of political will? Part I of this paper presents the historical material as far as the production of Poseidon: Part II will complete the history, and then discuss the various analytical frameworks commonly used to explain such developments.

history & philosophy of science
Technology of Explosive Cutting to Clear Ejection Path

Huanwen GUAN,Xu ZHANG,Wenchun FENG,Yongfeng ZHU

DOI: https://doi.org/10.7527/s1000-6893.2013.0007

2013-01-01

Abstract:On account of aircraft stealth performance and other factors,the top of an aircraft cockpit is now a metal structure rather than the traditional structure.In the course of ejection,the technology of explosive cutting is used to cut the metal structure into a hatch,and then the hatch is jettisoned to clear the ejection path.This technology is used in B-1B and B2.This paper uses a metal pad to simulate the top of an aircraft cockpit.The relationship between the capacity of the cutting device and the thickness of the metal structure,the effect of shock noise on the crew in the course of cutting,and the damage protection of the crew from the explosive remainder are analyzed and studied by test.The effect of shock noise on the crew in the course of cutting is compared with the requirements of national military standards.This research can provide some groundwork for future engineering application of explosive cutting.
Development Status and Trend of Stealth Technology of Tactical Missiles

D G Xu,J S Liu,S Luo,P Li

DOI: https://doi.org/10.1088/1742-6596/2460/1/012064

2023-04-01

Journal of Physics: Conference Series

Abstract:Abstract In modern warfare, precision guided munitions have become one of the major equipment to attack and hit the enemy’s crucial value targets. In addition, they are the critical targets of the missile defense and anti-aircraft interceptor system of varying countries during interception and destruction, and the world has increased investment in missile defense. Therefore, the penetration and countermeasures capacities of missiles holds the key to the victory, and the stealth technology of tactical missiles provides a vital orientation for the future advancement of weapons and equipment technology. Based on the current military requirements, this paper summarizes the application of stealth technology in varying tactical missiles and analyzes the development trend of such technology in the future, which is expected to have great implications for further research and application of both stealth and anti-stealth technology.
Boeing: Reclaiming the lost ground?

Sahil Singh Jasrotia,Manoj Kumar Kamila,Priyank Sinha

DOI: https://doi.org/10.1177/20438869241255960

2024-05-24

Journal of Information Technology Teaching Cases

Abstract:Journal of Information Technology Teaching Cases, Ahead of Print. Boeing is a leading American aerospace and defense company that has a long history dating back to 1916. William Boeing, in Seattle, Washington, founded the company and focused initially on building seaplanes for commercial and military use. Throughout its history, Boeing has taken several risks that have helped to shape the company into the global powerhouse it is today. One of the earliest examples of this is the company's decision to shift its focus from building seaplanes to building land-based aircraft in the 1920s. This move was risky at the time, as the market for land-based aircraft was still relatively untested, but it ultimately paid off as the demand for air travel proliferated in the following years. Another significant risk that Boeing took was the development of the 747, which was the first wide-body commercial airliner. This massive project required a significant investment in time and money, which later proved to be a huge success and established Boeing as the leader in the commercial aircraft industry. Boeing has traditionally adopted this risky business strategy, popularly known as "bet the business strategy," which is characterized by a high risk of product failure in every new product development cycle. So far, Boeing has successfully navigated each cycle, allowing the company to maintain its market leadership and generate good financial returns.
Research and Implementation of Project Management System for Multi-Type Projects in Aerospace Based on Web Technology

WU Chen-guang,HUANG Li-ping,ZHANG Song,LI Heng

DOI: https://doi.org/10.3969/j.issn.1008-0570.2008.21.001

2008-01-01

Abstract:Based on the product development in aerospace, the thesis develops a comprehensive web management system using B/S structure. The thesis analyzes function requirements of the system aiming at Matrix Organization of multi- type projects in aerospace, establishes function models accordingly, and then designs system structure, use cases, and data objects model of the system. The the- sis also introduces some key technology about Progress Planning, WBS, and how to choose collaboration objects in dynamic alliance.
Management Project for Experiment Implementation of Army-battle Simulation

FENG Zhan-li,ZHANG Ying,ZHANG Meng

DOI: https://doi.org/10.3969/j.issn.1673-3819.2013.05.025

2013-01-01

Abstract:The army-battle simulation experiment implementation management is the core power that drives it to develop continuously and forward,is important assurance that reaches simulation experiment's task.In the light of the characteristics and requirements of army-battle simulation experiment implementation,this text passes to build up an effective army-battle simulation experiment implementation management project,from the abstract angle try hard to integrate the formatting setting of initialization data,the integration and optimization of models,the dynamic control of experiment implementation etc.to a unified project space,thus effectively raise of the function and efficiency of simulation experiment system,lay the foundation for the simulation experiment results analysis.
Avrocar: a real flying saucer

Desire Francine G. Fedrigo,Ricardo Gobato,Alekssander Gobato

DOI: https://doi.org/10.48550/arXiv.1507.06916

2015-07-24

Popular Physics

Abstract:One of the most unusual military aircraft programs V / STOL was the Avro VZ-9 "Avrocar". Designed to be a real flying saucer, the Avrocar was one of the few V / STOL to be developed in complete secrecy. Despite significant changes in the design, during flight tests, the Avrocar was unable to achieve its objectives, and the program was eventually canceled after an expenditure of 10 million US dollars between 1954 and 1961. But the concept of a lift fan, driven by a turbojet engine is not dead, and lives today as a key component of Lockheed X-35 Joint Strike Fighter contender. Was held in a data research and information related to Avrocar project carried out during the Second World War, which was directly linked to advances in aircraft that were built after it, and correlate them with the turbo fan engines used today.
Conceptual design and integration of a propulsion system for a supersonic transport aircraft

Rhys Hutchinson,Jeremy Lawrence,Keith F Joiner

DOI: https://doi.org/10.1177/09544100211016952

2021-05-06

Abstract:Despite 50 years of technological advancement since the inception of Concorde, research on supersonic passenger aircraft has only recently resulted in design and flight test of several small 12 to 55-passenger business jets with supersonic cruises between Mach 1.2 and 2.2. Analytical research designs of larger 300-passenger aircraft have been conducted only to speeds of Mach 2.0 and 2.2, mainly avoiding moving beyond turbojet propulsion. This research extends on an earlier multifactor regression sizing study to determine in greater design detail whether the configuration of a 200-passenger Mach 3.0 aircraft is feasible using extant technology. This research article is the second part of two and covers a suitable and cost-effective propulsion system for the executive supersonic passenger aircraft. Through this high-speed design, the research examines modern propulsion technology and the performance advancements it affords through higher efficiencies, higher metallurgical thermal limits, variable cycle engines and variable stator technology. The analysis was conducted on several potential propulsion systems using GasTurb software to obtain engine performance data. The performance results led to a combined cycle turbofan–ramjet engine as being the engine that could yield the most extensive range for the aircraft. Further investigation is needed on aircraft noise, engine emissions, the accuracy of the thrust-critical lift-to-drag ratios and the aeroelastic effects that can be closely coupled to noise and performance.

engineering, mechanical, aerospace
Project Management System for Complex Product

Shuangxi Huang

2006-01-01

Abstract:According to the requirements of complex product,such as aeronautic and astronautic product,the characteristics of the project management for complex product is analyzed,the multi-layer architecture of project management system is proposed,which adapts to com-plex product development.The functionality of the system is given,and the detail design of sub system is discussed.Using the system,the efficiency and the level of management will be improved,and the cost will be decreased.
Global strike hypersonic weapons

Mark J. Lewis

DOI: https://doi.org/10.1063/1.5009210

2017-01-01

AIP Conference Proceedings

Abstract:Beginning in the 1940’s, the United States has pursued the development of hypersonic technologies, enabling atmospheric flight in excess of five times the speed of sound. Hypersonic flight has application to a range of military and civilian applications, including commercial transport, space access, and various weapons and sensing platforms. A number of flight tests of hypersonic vehicles have been conducted by countries around the world, including the United States, Russia, and China, that could lead the way to future hypersonic global strike weapon systems. These weapons would be especially effective at penetrating conventional defenses, and could pose a significant risk to national security.
The B61-based "Robust Nuclear Earth Penetrator:" Clever retrofit or headway towards fourth-generation nuclear weapons?

Andre Gsponer

DOI: https://doi.org/10.48550/arXiv.physics/0510052

2005-10-06

Physics and Society

Abstract:It is scientifically and technically possible to build an earth penetrating device that could bury a B61-7 warhead 30 meters into concrete, or 150 meters into earth, before detonating it. The device (based on knowledge and technology that are available since 50 years) would however be large and cumbersome. Better penetrator materials, components able to withstand larger stresses, higher impact velocities, and/or high-explosive driven penetration aids, can only marginally improve the device. It is concluded that the robust nuclear earth penetrator (RNEP) program may be as much motivated by the development of new technology directly applicable to next generation nuclear weapons, and by the political necessity to periodically reassess the role and utility of nuclear weapons, than by the perceived military need for a weapon able to destroy deeply buried targets.
A new paradigm for virtual knowledge sharing in product development based on emergent social software platforms

Richard David Evans,James Xiaoyu Gao,Nick Martin,Clive Simmonds

DOI: https://doi.org/10.1177/0954405417699018

2017-03-25

Abstract:The UK Government considers its Aerospace Industry a remarkable success story, enjoying a global market share of 17% in 2015. The capture, management and sharing of employee knowledge is seen as vital if the industry is to remain highly innovative and retain its pre-eminent position internationally. Aerospace manufacturers, such as BAE Systems, often have to re-engineer business processes routinely to ensure their survival. Knowledge sharing in the industry is seen as challenging due to the dispersed nature of its operations and multi-tier supply chains. This article, through a 5-year participant-observation study at the World’s second largest aerospace and defence organisation, BAE Systems, proposes a new paradigm for virtual knowledge sharing in dispersed aerospace product development based on emergent social software platforms such as Enterprise 2.0 technologies. The developed framework and methodologies are applied to the bespoke BAE Systems’ engineering lifecycle process to validate its effectiveness with results indicating that Enterprise 2.0 technologies offer a more openly innovative environment in which employees may share and interact with knowledge more effectively and easily across geographical and functional boundaries, compared with conventional engineering information systems.
Airborne Boost-Phase Ballistic Missile Defense

Dean A. Wilkening

DOI: https://doi.org/10.1080/08929880490464649

2004-01-01

Science and Global Security

Abstract:Boost-phase ballistic missile defense is alluring because rocket boosters are easy to detect and track, they are relatively vulnerable due to the large axial loads on a missile under powered flight, the entire payload (single or multiple warheads and midcourse penetration aids) may be destroyed in a single shot, and countermeasures to defeat boost-phase defense are more difficult to devise than for midcourse ballistic missile defenses. Moreover, if intercepted several seconds before booster burnout, the debris will land well short of the target area, although collateral damage to other territory is a serious concern. On the other hand, boost-phase ballistic missile defense is technically challenging because the intercept timelines are very short (1–3 minutes for theater-range ballistic missiles and 3–5 minutes for intercontinental range missiles) and missile boosters are accelerating targets, thus complicating the design of homing kinetic-kill vehicles (KKVs). This article examines the technical feasibility and nominal capability of one type of boost-phase defense, namely, airborne boost-phase intercept (ABI). Airborne laser systems are not examined here. 1 This article concludes that ABI should be technically achievable within the next decade and that airborne platforms offer some unique advantages, especially for theater ballistic missile defense, that warrant their serious consideration in future U.S. missile defense architectures.
The Development of Blue Steel

R. H. Francis

DOI: https://doi.org/10.1017/s0368393100079414

1964-05-01

Abstract:Blue Steel is an air-surface missile carrying a thermonuclear warhead and intended to enable the V bombers to operate without going into areas in which they would be exposed to concentrated guided weapon attack. It has a canard configuration with small delta-shaped foreplanes for pitch control, a rear-mounted wing with inboard ailerons and a pair of fins of which the upper carries a yaw damper; the lower fin folds sideways to give sufficient ground clearance when the missile is installed on the aircraft (Fig. 1). Its exact performance cannot yet be stated but it is the largest of the British Missiles to get into Service.
Modeling the Performance of Hypersonic Boost-Glide Missiles

Cameron L. Tracy,David Wright

DOI: https://doi.org/10.1080/08929882.2020.1864945

2020-09-01

Science and Global Security

Abstract:<span>The United States, Russia, and China are developing an array of hypersonic weapons—maneuverable vehicles that carry warheads through the atmosphere at more than five times the speed of sound. Proponents claim that these weapons outperform existing missiles in terms of delivery time and evasion of early warning systems. Here, we report computational modeling of hypersonic boost-glide missile flight which shows that these weapons travel intercontinental distances more slowly than comparable ballistic missiles flying depressed trajectories, and that they remain visible to existing space-based sensors for the majority of flight. Fundamental physical limitations imposed by low-altitude atmospheric flight render hypersonic missiles an evolutionary—not revolutionary—development relative to established ballistic missile technologies. Misperceptions of hypersonic weapon performance have arisen from social processes by which the organizations developing these weapons construct erroneous technical facts favoring continued investment. The modeling reported here provides a basis for rigorous, quantitative analysis of hypersonic weapon performance.</span>

English Else
Exploration in Booster Reuse Employing Aerosurfaces

Timur Dayanov

2023-10-07

Abstract:A new idea for reusing rockets, based on the Energia 2 launch vehicle, using deployable wings is proposed. A mission design is planned with an expected maximum altitude of 500 m. Following that systems engineering was used to manage the design process of separate components, which in turn led to the manufacturing plans for the separate components. The sizing studies were used to determine how big each component would need to be, and a weight and balances sheet was used to determine the position of the wings for optimal static margin and stability percentage. A derivation was made using basic Newtonian mechanics for determining the maximum mass of the rocket given a target altitude. Following that Computer Assisted Design (CAD) drawings were created of critical components before outlining the necessary structural tests and the flight test plan. A MatLab script to determine static stability was used which confirmed the stability of the booster at angle of attacks from 0 to 5 degrees. A MatLab script to determine glide ratio and range was used on the booster and Energia 2 to show scalability, and which was found feasible.

Fluid Dynamics
From Subsonic to Hypersonic Cruise Missiles: Revolution or Evolution in Land Attack Capabilities?

Kalyan M. Kemburi

DOI: https://doi.org/10.1057/9781137461285_9

2016-01-01

Abstract:Since the beginning of the 1990s, the advent and success of US “cruise-missile diplomacy”1 has resulted in the emergence of cruise missiles as a coercive political tool and a versatile military weapon. During the initial phase of the last two decades, cruise missiles were predominantly deployed by a select group of advanced industrial countries, in particular the United States. However, the last decade had witnessed a new trend with emerging industrial countries showing increased propensity to develop cruise missiles. In addition to the effectiveness in carrying out all-weather precision strikes at standoff ranges, the rationale for acquiring cruise missiles is also driven due to the belief in the weapon systems’ ability to penetrate air defenses and the affordability in development and deployment.2
Mobilizing Megaproject Narratives for External Stakeholders: A Study of Narrative Instruments and Processes

Johan Ninan,Natalya Sergeeva

DOI: https://doi.org/10.1177/87569728221102719

2022-06-01

Project Management Journal

Abstract:Project Management Journal, Ahead of Print. Megaprojects combine multiple external stakeholders, and a common narrative is essential to drive the project among often conflicting objectives. Narratives help organize people toward an agenda and therefore have performative and strategic implications. In this research, we explore how narratives are mobilized through narrative instruments and processes using the case study of the High Speed Two (HS2) megaproject in the United Kingdom. We record the use of three instruments—stories, labels, and comparisons—that undergo four processes: repeating, endorsing, humorizing, and actioning. These instruments and processes enable megaprojects to mobilize a narrative that helps in managing external stakeholders.

management

How project management helped the B‐2 Stealth Bomber to take off

Future Air Force systems

Optimizing Obscurity: Advancing Stealth Capabilities and Performance of BWB Fighter with Symmetric Supercritical Airfoils

The Shaping of Nuclear Weapon System Technology: US Fleet Ballistic Missile Guidance and Navigation: I: From Polaris to Poseidon

Technology of Explosive Cutting to Clear Ejection Path

Development Status and Trend of Stealth Technology of Tactical Missiles

Boeing: Reclaiming the lost ground?

Research and Implementation of Project Management System for Multi-Type Projects in Aerospace Based on Web Technology

Management Project for Experiment Implementation of Army-battle Simulation

Avrocar: a real flying saucer

Conceptual design and integration of a propulsion system for a supersonic transport aircraft

Project Management System for Complex Product

Global strike hypersonic weapons

The B61-based "Robust Nuclear Earth Penetrator:" Clever retrofit or headway towards fourth-generation nuclear weapons?

A new paradigm for virtual knowledge sharing in product development based on emergent social software platforms

Airborne Boost-Phase Ballistic Missile Defense

The Development of Blue Steel

Modeling the Performance of Hypersonic Boost-Glide Missiles

Exploration in Booster Reuse Employing Aerosurfaces

From Subsonic to Hypersonic Cruise Missiles: Revolution or Evolution in Land Attack Capabilities?

Mobilizing Megaproject Narratives for External Stakeholders: A Study of Narrative Instruments and Processes