Abstract:The temperature-sensitive paint (TSP) method, an optical measurement technique, is used for qualitative skin friction visualizations in a wide variety of aerodynamic applications. One such application is the visualization of the laminar-turbulent boundary-layer transition. Optical access to the surface of interest is mandatory for the measurement system, which consists of scientific cameras and LEDs. But the optical access to the area of interest is often impeded by the available windows of the wind tunnel and the wind tunnel model itself, reducing the field of view and the spatial resolution. In some cases, it is of interest to increase the flexibility of the installation of the optical measurement system by reducing its physical dimensions and placing the installation inside the plenum. The DLR Swept flat PlatE Cross-flow TRAnsition (SPECTRA-A) configuration was selected to investigate the influence of two-dimensional steps on the cross-flow-induced boundary layer transition by means of TSP, as part of the EU project Clean Sky 2. The SPECTRA-A configuration consists of two main elements: a flat plate and a displacement body mounted within a very close distance of each other, creating a narrow gap between the two elements. The surface of interest is the area on the flat plate facing the displacement body. The narrow gap limits the utilization of an external camera setup due to poor optical access. A new optical setup consisting of four miniature CMOS machine-vision cameras and five miniature high-power LEDs was integrated into the displacement body. The characteristics of the camera system were analyzed in laboratory tests, establishing that the miniature CMOS machine-vision cameras are suitable for qualitative TSP skin friction visualizations. This was confirmed by successfully measuring the laminar-turbulent boundary-layer transition on the SPECTRA-A configuration. The integrated TSP system is capable of resolving even small variations of the transition location caused by changing the amplitude of the stationary cross-flow instability. The quality of the TSP visualization with the integrated optical system allows for the measurement of the transition location and the wavelength of the stationary cross-flow instability. Overall, a cost-effective TSP visualization system with small space requirements was developed and tested for future applications in wind tunnel models, model support, or side walls of wind tunnels.

The SCATMES Device for Measurement of Concentrated Solar Radiation

Characterization of a Test Site for the Measuring of the Focal Point of Reflective Optical Elements for Concentrator Photovoltaic

Experimental evaluation of the concentrated solar heat flux distribution provided by an 8 m 2 Scheffler reflector

Development of a spatially resolved reflectometer to monitor corrosion of solar reflectors

Constructing the Large-Scale Collimating Solar Simulator with a Light Half-Divergence Angle <1° Using Only Collimating Radiation Modules

Laboratory demonstration of Grating Embedded Mirrors for single-shot heliostat optical metrology

A Novel Sun-Tracking and Target-Aiming Method to Improve the Concentration Efficiency of Solar Central Receiver Systems

The Scatman: an approximate method for fast wide-angle scattering simulations

A 130 kWe solar simulator with tunable ultra-high flux and characterization using direct multiple lamps mapping

Design of a horizontal neutron reflectometer for the European Spallation Source

Development of a Fresnel lens based high-flux solar simulator

VISproPT: A high-precision instrument for 3D shape analysis of parabolic trough panels

Experimental Investigation on the Vector Characteristics of Concentrated Solar Radiation Flux Map

Novel additive-manufactured tracking solar concentrating system for cooking applications: Design, geometry assessment, and optical evaluation

An Improved Method of Lambertian CCD-camera Radiation Flux Measurement Based on SMARTS (simple Model of the Atmospheric Radiative Transfer of Sunshine) to Reduce Spectral Errors

Simulated performance of a single pixel PIN spectrometer SCXM equipped with concentrator optics in Solar coronal X-ray observations

Miniaturization and Model-Integration of the Optical Measurement System for Temperature-Sensitive Paint Investigations

Description and Characterization of a 114-kWe High-Flux Solar Simulator

Prototype of a segmented scintillator detector for particle flux measurements on spacecraft

Novel solid-state solar thermal simulator supplying 30,000 suns by a fibre optical probe

MCP detector development for UV space missions