Abstract:Recently, the use of natural dyes for simultaneous dyeing and finishing of textiles has become a popular trend with the expanding interest in eco-textiles and environmental-friendly processing techniques. In this study, the natural dye was extracted from biomass lotus seedpod waste, and the effects of temperature, time, and pH as well as a metal mordant on fabric dyeing performance were investigated, and then it was applied to eco-dyeing and functional finishing of cotton fabric together with the bio-mordant chitosan. The dyeing performance and functionality of cotton fabric were characterized through SEM, UV–Vis, Datacolor and indicators such as color strength, color fastness, ultraviolet protection factor, and bacterial inhibition rate. The results showed that the color stability of natural dye was higher under acidic conditions, and the pH had more influence on the dyeing effect of the fabric compared with temperature and time. Though metal mordanting could obtain a higher color strength, it had a certain effect on the color phase of the dyed fabric. SEM showed that cationized chitosan was successfully deposited on the surface of cotton fibers, which improved the dye exhaustion rate of the fabric by reducing the electrostatic repulsion between cotton fibers and dye molecules, thus increasing the color strength ( K/S value of about 4–5 for directly dyed cotton fabric and 7.6446 for chitosan pretreated dyed cotton fabric) and various color fastness (rubbing, washing, saliva, and light fastness were greater than or equal to grade 4). Compared with other fabrics, the chitosan pretreated dyed cotton fabric had a higher ultraviolet protection factor (UPF value = 63.4) and excellent inhibition of E. coli and S. aureus (99.86 and 99.99% initial inhibition, 99.08 and 98.21% after ten cycles of washing). This study provides a new idea for the high-value utilization of biomass waste in textile processing.

Single-step Single Bath Dyeing and Finishing of Nylon with Disperse Dye and Chitosan by Using Decamethylcyclopentasiloxane Solvent as Dyeing Media

Use of quaternary ammonium salt as a dye fixing agent and antimicrobial agent in sustainable, single-step single-bath dyeing and finishing

Antibacterial Water and Oil Repellent Multifunctional Finishing Agent for Fabric

The Wash-off of Dyeings Using Interstitial Water Part 5: Residual Dyebath and Wash-off Liquor Generated During the Application of Disperse Dyes and Reactive Dyes to Polyester/cotton Fabric

A sustainable approach for linen dyeing and finishing with natural lac dye through chitosan bio-mordanting and microwave heating

Dyeing Improvement and Stability of Antibacterial Properties in Chitosan-Modified Cotton and Polyamide 6,6 Fabrics

Preparation of chitosan based antibacterial agent CS-g-DMC and its long-effective antibacterial finishing for cotton fabric

Eco-dyeing and Functional Finishing of Cotton Fabric by Natural Dye Derived from Lotus Seedpod Waste with Chitosan-Assistance

To enhance the dyeability of cotton fiber with the application of reactive dyes by using chitosan

Antimicrobial and Dyeing studies of treated cotton fabrics by prepared Chitosan-PAMAM Dendrimer/Ag Nano-emulsion

Study of the Effects on Multifunctionality of Treating Nylon with a Mixed Sol

A sustainable process for cotton and polyester/cotton blend dyeing with nucleophilic disperse dyes through chemical modification

High-efficiency Dispersant-Free Polyester Dyeing Using D5 Non-Aqueous Medium

Green extraction of colorants from achiote seeds for dyeing mordanted nylon fabric

Sustainable Antimicrobial and Antioxidant Finishing and Natural Dyeing Properties of Wool Yarn Treated with Chitosan-poly(amidoamine) Dendrimer Hybrid as a Biomordant

Functional versatility of hybrid composite finishing of chitosan-titania NPs-organic UV-absorber for polyacrylonitrile fabric

Water-saving aftertreatment of reactive dyed cotton fabrics in D5 medium

Clean dyeing of cotton fabrics by cross-linking reactive dyes with fiber macromolecular chains

In Situ Synthesis of a Double-Layer Chitosan Coating on Cotton Fabric to Improve the Color Fastness of Sodium Copper Chlorophyllin

Ultrasonic-Aided Co-Precipitation of Tannins and Chitosan Ammonium Salt on Cotton Fabric for Antimicrobial and Ultraviolet-Shielding Properties: An Efficient, Colourless, and Eco-Finishing Strategy

Low-hazardous multi-functional textile through one-step nano-assisted processing