Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Numerical simulation of a novel regenerative heat exchanger with combined sensible–latent heat storage matrix

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Novel rotary regenerative heat exchanger using cascaded phase change material capsules

Energy Transfer and Conversion in the Allam Cycle with a Multi-Stream Heat Exchanger

Performance Evaluation and Analysis of a Vertical Heat Pipe Latent Thermal Energy Storage System with Fins-Copper Foam Combination

Numerical Simulation of Rapid Heat Storage in Plate-Fin Phase Change Heat Exchanger

Numerical simulation and optimization of compact latent heat exchanger with micro-channel plate in shape-stabilized composite phase change material

Numerical Modeling of Recuperative Cryogenic Matrix Heat Exchangers and the Experimental Validation

Numerical Simulation of Thermal Performance and Thermal Stress of Latent Heat Storage System with Various Fins

3D Numerical Analysis of a Phase Change Material Solidification Process Applied to a Latent Thermal Energy Storage System

Heat Transfer Performance Optimization for Mesh Regenerator

Modelling of elastocaloric regenerators with enhanced heat transfer structures

Steady-state Simulation Analysis of Triple-sleeve Phase-change Energy Storage Heat Exchanger in Heating Mode

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Experimental and numerical investigation on heat transfer enhancement of vertical triplex tube heat exchanger with fractal fins for latent thermal energy storage

Numerical Investigation on Three-fluid Heat Exchanger for Hybrid Energy Source Heat Pumps

Numerical study on solidification behavior and exergy analysis of a latent heat storage unit with innovative circular superimposed longitudinal fins

A novel transfer matrix-based method for steady-state modeling and analysis of thermal systems

Numerical study of heat transfer characteristics of intermittent flow cold storage surface heat exchanger

Heat Charge Performance Prediction and Optimization of Locally Refined Bionic Fin Heat Exchanger with PCM and Nanoparticles Based on NSGA-II

CFD Analysis of Latent Heat Energy Storage System with Different Geometric Configurations and Flow Conditions