Abstract:The laser powder bed fusion (LPBF) method, more commonly known as selective laser melting (SLM), is one of the most common metal additive manufacturing (AM) processes. It is a layer-by-layer fabrication process where each powder layer is melted and fused by a laser beam, which traverses over the designated part geometry cross-section, as defined by a sliced CAD model. The LPBF process is being popularly used to manufacture end products of intricate geometry for various industries, such as the automobile, aerospace, defence, and biomedical industries. In designing parts, the topology optimisation (TO) technique can be effectively employed to optimise the distribution of material throughout the part and obtain the minimum volume/weight without compromising the mechanical performance of the component. This study focusses on the design optimisation and validation of the optimisation approaches used for LPBF-printed AlSi12 metal parts. The mechanical performance of three different topologically optimised lattice beams, viz. 1 × 1, 8 × 3, and 12 × 3, printed using the LPBF process, was investigated. When the beams were tested in bending, it was found that these TO LPBF-printed beams behaved differently when compared to the LPBF-printed solid beam. The 1 × 1 lattice beam performed better than the other two lattice beams due to the lower number of links where premature failure was delayed. The 1 × 1 lattice beam exhibited a load-bearing capacity of 17 ± 2 kN, whereas the 8 × 3 and 12 × 3 lattice beams showed load capacities of 13 ± 1 kN and 10 ± 1 kN, respectively. This mechanical behaviour was modelled and simulated by using a finite element analysis, and it was found that the LPBF-printed material property was affected by the design elements present in the beam. It was also found that each topology-optimised beam fits a different material model when compared to the SLM-printed solid beam. Therefore, a new material model or simulation technique needs to be developed to overcome this issue.

Design for Additive Manufacturing and for Machining in the Automotive Field

Integrated CAD platform approach for Design for Additive Manufacturing of high performance automotive components

Powder bed fusion integrated product and process design for additive manufacturing: a systematic approach driven by simulation

Additive Manufacturing Redesigning of Metallic Parts for High Precision Machines

Laser Powder Bed Fusion: A Review on the Design Constraints

Numerical Investigation into the Effect of Different Parameters on the Geometrical Precision in the Laser-Based Powder Bed Fusion Process Chain

Mitigation of Residual Stress and Distortion of AlSi10Mg Parts Produced by Laser Powder Bed Fusion through a Proper Selection of Support Geometry

Laser powder bed fusion additive manufacturing (LPBF-AM): the influence of design features and LPBF variables on surface topography and effect on fatigue properties

Support Structures Optimisation for High-Quality Metal Additive Manufacturing with Laser Powder Bed Fusion: A Numerical Simulation Study

Sustainable laser metal deposition of aluminum alloys for the automotive industry

Design and validation of integrated clamping interfaces for post-processing and robotic handling in additive manufacturing

Metallurgical Defects and Roughness Investigation in the Laser Powder Bed Fusion Multi-Scanning Strategy of AlSi10Mg Parts

Design and additive manufacturing of a fatigue-critical aerospace part using topology optimization and L-PBF process

CFD modeling for predicting imperfections in laser welding and additive manufacturing of aluminum alloys

Process-Specific Topology Optimization Method Based on Laser-Based Additive Manufacturing of AlSi10Mg Components: Material Characterization and Evaluation

Influence of Abrasive Materials in Fluidised Bed Machining of AlSi10Mg Parts Made through Selective Laser Melting Technology

Steering column support topology optimization including lattice structure for metal additive manufacturing

Improved Productivity with Multilaser Rotary Powder Bed Fusion Additive Manufacturing

Ongoing Challenges of Laser-Based Powder Bed Fusion Processing of Al Alloys and Potential Solutions from the Literature—A Review

Design Optimization and Finite Element Model Validation of LPBF-Printed Lattice-Structured Beams

Assessment of Computer-Aided Design Tools for Topology Optimization of Additively Manufactured Automotive Components