Abstract:In service, thermal-mechanical coupling conditions can exacerbate stress relaxation of O-rings and lead to their thermal expansion, further complicating the sealing problem. A finite element method is developed to simulate the mechanical deformation behavior of O-rings under thermal-mechanical coupling conditions, and its validity is verified by comparison with experimental data. Based on a substantial amount of simulation data, it is found that a dimensionless contact stress can be used as an indicator of the degradation of sealing performance and can be related to temperature T and time τ in the form of an aging kinetic equation. By combining this equation with the existing interfacial leakage model, an approach of predicting the long-term leakage rate of O-rings is proposed to quantitatively evaluate the effect of various factors on the performance of O-rings, and some important conclusions are drawn. Regarding the effect of temperature on O-rings, the thermal expansion effect dominates when the service time is less than 20 days, and the stress relaxation effect prevails when it is greater than 20 days. The higher the temperature, the more significant the stress relaxation, and the faster the leakage rate of O-rings. Increasing the fluid pressure enhances the relaxation effect. Using the maximum allowable leakage rate as the failure criterion, a pressure-temperature curve is plotted representing the safety boundaries, which can be used to guide the design of the sealing structures. Furthermore, an exhaustive study on the service life evaluation shows that at high temperature (T ≥ 120 °C), the service life curves show a plunging segment near a pressure rise to 0.42 MPa.

Finite element analysis of large-sized O-rings used in deep-ocean pressure chambers

Experimental Research and Finite Element Analysis of Seals in the Pressure Compensator

Sealing Performance Analysis of Deep-Sea Sediment Sampler

A Deep-Sea Large-Volume High-Pressure Simulation System—design, Analysis and Experimental Verification

FEA-Based Failure Analysis of a UHP Chamber for Simulation of Deep Sea Conditions

Design and Performance Analysis of a Pressure Chamber for Simulation of Deep Sea Conditions

Research and Development of a Rubber O-Ring Sealing Device for High Pressure Vessels

A Study On Performance Of O-Shaped Seal Ring In Lwd Device Using Finite Element Analysis

Influence of ambient pressure on sealing performance of O-ring in deep-sea hydraulic system

Prelimilary study of analytical methods on geometrical and mechanics properties of O-rings in reactor coolant pumps

Structural Analysis and Experimental Study on the Spherical Seal of a Subsea Connector Based on a Non-Standard O-Ring Seal

Finite Element Analysis of Reciprocating Sealing Component of Radial Single-piston Pump

Three-dimensional finite element analysis of O-ring metal seals considering varying material properties and different seal diameters

Analysis on Self-compressibility of Sealing Materials under High Pressure in Deep-sea

Finite Element Analysis of Sealing Performance of Rubber D-Ring Seal in High-Pressure Hydrogen Storage Vessel

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Long-term sealing performance evaluation and service life prediction of O-rings under thermal-mechanical coupling conditions

Deformation Characteristics and Sealing Performance of Metallic O-rings for a Reactor Pressure Vessel

The Non- Linear Contact Finite Element Analysis of Seal Structure on Large Scale Cutting Tube Machine

Novel dual synergistic sealing ring design for a high-pressure pump – Part I