Flexible electrochromic devices based on tungsten oxide and Prussian blue nanoparticles for automobile applications

Chan Yang Jeong,Takashi Kubota,Kazuki Tajima

DOI: https://doi.org/10.1039/d1ra05280b

IF: 4.036

2021-01-01

RSC Advances

Abstract:Next-generation flexible ECD using nanoparticles water-dispersion ink.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Electrochromic Polymers Based on 1,4-Bis((9H-carbazol-9-yl)methyl)benzene and 3,4-Ethylenedioxythiophene Derivatives as Promising Electrodes for Flexible Electrochromic Devices

Chung-Wen Kuo,Jui-Cheng Chang,Yu-Xuan Lin,Pei-Ying Lee,Tzi-Yi Wu,Tsung-Han Ho

DOI: https://doi.org/10.3390/coatings12050646

IF: 3.236

2022-05-10

Coatings

Abstract:A 1,4-bis((9H-carbazol-9-yl)methyl)benzene (DCB)-containing homopolymer (P(DCB)) and four DCB- and ED-derivative (3,4-ethylenedioxythiophene (EDOT) and 3,4-ethylenedioxythiophene-methanol (EDm))-containing copolymers (P(DCB-co-ED), P(2DCB-co-ED), P(DCB-co-EDm), and P(2DCB-co-EDm)) were electropolymerized on ITO-polyethylene terephthalate (PET) substrates and their electrochromic performances were studied. DCB displays a lower Eonset than that of EDOT and EDm, conjecturing that the biscarbazole-containing DCB group shows a stronger electron-donating property than that of the ED derivatives. The P(2DCB-co-ED) film presents slate grey, dark khaki, and dark olive green at 0.0, 1.0, and 1.2 V. Bleaching-to-coloring switching studies of polymers show that P(2DCB-co-EDm) shows a high ΔT (31.0% at 725 nm) in solutions. Five dual-layer flexible electrochromic devices (ECDs) based on P(DCB), P(DCB-co-ED), P(2DCB-co-ED), P(DCB-co-EDm), and P(2DCB-co-EDm) as the anodic materials and PEDOT-PSS as the cathodic material are constructed. The P(2DCB-co-ED)/PEDOT-PSS flexible ECD shows a high ΔT (40.3% at 690 nm) and long-term electrochemical cycling stability, while the P(DCB-co-EDm)/PEDOT-PSS ECD shows a high ΔT (39.1% at 640 nm) and short response time (≤1.5 s). These findings offer us a new structural insight for the valuable design of conjugated polymers in high-contrast, flexible ECDs.

materials science, multidisciplinary,physics, applied, coatings & films
Inorganic Multi-Color Transmissive-Type Electrochromic Electrodes Based on Fabry-Perot Interferometer for Full-Solid Smart Window

Ziqiang Cheng,Yongkang Tang,Gang Li,Gang Xu,Yong Liu,Gaorong Han

DOI: https://doi.org/10.1016/j.solmat.2023.112307

2023-01-01

Abstract:Recent inorganic multi-color electrochromic electrodes frequently contain thick reflecting coatings, sacrificing transparency and limiting their applications. In the present work, a strategy for creating inorganic multi-color transmissive-type electrochromic electrodes (MCTEEs) is proposed within the context of an asymmetric Fabry-Perot interferometer, which satisfies the aesthetic requirement for color variation while maintaining adequate transmittance. Based on the optimized design, a prototype MCTEE was successfully created using the magnetron co-sputtering technique, which has a high potential for use in transparent display and decorating applications because of its good cycle stability (72.4% optical modulation remained after over 600 cycles), the fast response time (6.5 s/3.8 s for coloration/bleaching process), and the good color tunability (pink, colorless, light blue, and dark blue with various applied voltages).
Flexible Pseudocapacitive Electrochromics via Inkjet Printing of Additive‐Free Tungsten Oxide Nanocrystal Ink

Long Zhang,Dongliang Chao,Peihua Yang,Louis Weber,Jia Li,Tobias Kraus,Hong Jin Fan

DOI: https://doi.org/10.1002/aenm.202000142

IF: 27.8

2020-03-12

Advanced Energy Materials

Abstract:Direct inkjet printing of functional inks is an emerging and promising technique for the fabrication of electrochemical energy storage devices. Electrochromic energy devices combine electrochromic and energy storage functions, providing a rising and burgeoning technology for next‐generation intelligent power sources. However, printing such devices has, in the past, required additives or other second phase materials in order to create inks with suitable rheological properties, which can lower printed device performance. Here, tungsten oxide nanocrystal inks are formulated without any additives for the printing of high‐quality tungsten oxide thin films. This allows the assembly of novel electrochromic pseudocapacitive zinc‐ion devices, which exhibit a relatively high capacity (≈260 C g−1 at 1 A g−1) with good cycling stability, a high coloration efficiency, and fast switching response. These results validate the promising features of inkjet‐printed electrochromic zinc‐ion energy storage devices in a wide range of applications in flexible electronic devices, energy‐saving buildings, and intelligent systems.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
High-performance flexible electrochromic device based on facile semiconductor-to-metal transition realized by WO 3 ·2H 2 O ultrathin nanosheets

Lin Liang,Jiajia Zhang,Yingying Zhou,Junfeng Xie,Xiaodong Zhang,Meili Guan,Bicai Pan,Yi Xie

DOI: https://doi.org/10.1038/srep01936

IF: 4.6

2013-01-01

Scientific Reports

Abstract:Ultrathin nanosheets are considered as one kind of the most promising candidates for the fabrication of flexible electrochromic devices (ECDs) due to their permeable channels, high specific surface areas and good contact with the substrate. Herein, we first report the synthesis of large-area nanosheets of tungsten oxide dihydrate (WO 3 ·2H 2 O) with a thickness of only about 1.4 nm, showing much higher Li + diffusion coefficients than those of the bulk counterpart. The WO 3 ·2H 2 O ultrathin nanosheets are successfully assembled into the electrode of flexible electrochromic device, which exhibits wide optical modulation, fast color-switching speed, high coloration efficiency, good cyclic stability and excellent flexibility. Moreover, the electrochromic mechanism of WO 3 ·2H 2 O is further investigated by first-principle density functional theory (DFT) calculations, in which the relationship between structural features of ultrathin nanosheets and coloration/bleaching response speed is revealed.
Galvanic-driven deposition of large-area Prussian blue film for flexible battery-type electrochromic device

Yanfang Ding,Huanhuan Sun,Zhihao Li,Chunmei Jia,Xiaogang Ding,Can Li,Zhen Li,Jiangan Wang

DOI: https://doi.org/10.1039/d2ta08023k

IF: 11.9

2023-01-04

Journal of Materials Chemistry A

Abstract:The integration of electrochromic, energy storage, and mechanical flexibility in a multifunctional wearable electronic is highly desirable yet challenging. Herein, we demonstrate a simple and scalable galvanic-driven strategy to deposit large-area Prussian blue (PB) films on both rigid and flexible substrates. A flexible PB/Zn battery-type electrochromic device with multi-functions of flexible power sources and capacity depletion visualization is constructed. The finely tuned flexible electrochromic device exhibits excellent properties with large optical contrast (ΔT700 nm=68.3%), high coloration efficiency (117.2 cm2 C-1), rapid switching (4.7 s/7.5 s for coloring/bleaching), and long operating stability (>1000 cycles). The device also shows excellent flexibility, preserving the electrochromic properties under rigorous bending conditions. The PB/Zn device can serve as a flexible power source with large-capacity and good durability. Moreover, the discharging state of the battery can be monitored in a real-time and visible manner through electrochromic changes. The present work will shed a fresh impetus on the development of multifunctional smart devices toward real-world applications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Highly flexible electrochromic devices enabled by electroplated nickel grid electrodes and multifunctional hydrogels

Shi-Qing Zhao,Yan-Hua Liu,Zhu Ming,Cheng Chen,Wen-Wen Xu,Linsen Chen,Wenbin Huang

DOI: https://doi.org/10.1364/OE.27.029547

2019-10-14

Abstract:Flexible electronics, as a futuristic technology, is presenting tremendous impact in areas of wearable displaying, energy saving, and adaptive camouflage. In this work, we constructed a simple triple-layered electrochemical device with high flexibility using the electroplated nickel (Ni) grid electrode and the multifunctional hydrogel. The Ni grid electrode with low resistance (0.5 Ω/sq), high optical transparency (84.8%) and good mechanical flexibility, is beneficial for efficient electron injection, while the transparent lithium chloride hydrogel functions simultaneously for ion storage, ion transportation and counter-conducting. The thin polymer poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) film is utilized as the electrochromic (EC) material and it also distributes the electrons evenly for uniform coloration. The triple-layered EC architecture not only simplifies the manufacturing procedures but also improves the device performance in terms of optical contrast and mechanical robustness. The device shows fast response for coloration and bleaching with an absolute transmittance contrast of 40% and a contrast retention over 72% after 2500 bending cycles. The ability of the flexible electrochromic device for conformable attaching was also investigated without obvious performance degradation. The electroplated Ni grid electrode and the multifunctional hydrogel are advantageous in constructing flexible electrochromic devices in terms of the response time, the working stability and the bending capability, paving a way for next-generation flexible electronics.
Flexible Electrochromic Device on Polycarbonate Substrate with PEDOT:PSS and Color-Neutral TiO2 as Ion Storage Layer

Christopher Johannes,Sven Macher,Lukas Niklaus,Marco Schott,Hartmut Hillmer,Michael Hartung,Hans-Peter Heim

DOI: https://doi.org/10.3390/polym15091982

IF: 5

2023-04-23

Polymers

Abstract:Electrochromic (EC) windows on glass for thermal and glare protection in buildings, often referred to as smart (dimmable) windows, are commercially available, along with rearview mirrors or windows in aircraft cabins. Plastic-based applications, such as ski goggles, visors and car windows, that require lightweight, three-dimensional (3D) geometry and high-throughput manufacturing are still under development. To produce such EC devices (ECDs), a flexible EC film could be

polymer science
Durable Electrochromic Devices Driven at 0.8 V by Complementary Chromic Combination of Metallo-Supramolecular Polymer and Prussian Blue Analogues for Smart Windows with Low-Energy Consumption

Sheng‐Yuan Kao,Hsin-Che Lu,K. Ho,Dines Chandra Santra,Yuki Seino,M. Higuchi,L. Hsiao

DOI: https://doi.org/10.1021/ACSAELM.1C00132

2021-04-22

Abstract:Durable electrochromic devices (ECDs) driven at 0.8 V were successfully fabricated by the complementary chromic combination of Fe(II)-based metallo-supramolecular polymer (polyFe) and Prussian blue...

Chemistry,Engineering,Materials Science
Fabrication of Nickel-Doped Tungsten Trioxide Thin Film-Based Highly Stable Flexible Electrochromic Devices for Smart Window Applications

Khursheed Ahmad,Haekyoung Kim

DOI: https://doi.org/10.1021/acssuschemeng.3c01483

IF: 8.4

2023-07-12

ACS Sustainable Chemistry & Engineering

Abstract:In this study, we fabricated nickel (Ni)-doped tungsten trioxide (Ni-WO3) thin films using the sol–gel method. Different weight percentages (0, 0.1, 0.3, 0.5, 0.7, and 1.0%) of Ni were used to prepare different Ni-doped WO3 samples. Various characterization techniques such as scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy were adopted to confirm the formation of the Ni-doped WO3 samples. We also fabricated WO3- and Ni-WO3 [Ni(0.1)WO3, Ni(0.3)WO3, and Ni(0.5)WO3]-based flexible electrochromic devices (ECDs) on indium tin oxide-coated polyethylene terephthalate substrates. The WO3-based ECDs exhibited a coloration efficiency (CE) of 41.5 cm2/C with an optical contrast of 66.2%, while Ni(0.5)WO3-based ECDs showed a higher CE of 60.62 cm2/C with an adequate optical contrast of 78.31%. Further, Ni(0.5)WO3-based ECDs exhibited excellent cyclic stability up to 25,000 cycles and adequate bending stability up to 1000 cycles.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Novel electrochromic materials based on chalcogenoviologens for smart windows, E-price tag and flexible display with improved reversibility and stability

Ruitong Song,Guoping Li,Yueyan Zhang,Bin Rao,Shanxin Xiong,Gang He

DOI: https://doi.org/10.1016/j.cej.2021.130057

IF: 15.1

2021-10-01

Chemical Engineering Journal

Abstract:A series of electrochromic composites consisting of chalcogenoviologen-based ionic liquids ([C6EVC6][TFSI]2, E = S, Se, Te) and ferrocene-based ionic liquids ([FcC11ImC1][TFSI]) is reported. Electrochromic devices (ECDs) filled with these composites were assembled, demonstrating multiple colors under different voltages, fast switching times, high color contrast ratio, good reversibility and cycle stability. ECDs working as smart windows on a module house could slow down the room temperature rising in hot weather through changing color. In addition, the eye-catching E-price tag and flexible display devices which can show information dynamically, were assembled successfully. This contribution provided a new kind of electrochromic composites-based smart device for intelligent life.

engineering, chemical, environmental
Flexible and high-performance electrochromic devices enabled by self-assembled 2D TiO2/MXene heterostructures

Ran Li,Xiaoyuan Ma,Jianmin Li,Jun Cao,Hongze Gao,Tianshu Li,Xiaoyu Zhang,Lichao Wang,Qinghong Zhang,Gang Wang,Chengyi Hou,Yaogang Li,Tomás Palacios,Yuxuan Lin,Hongzhi Wang,Xi Ling

DOI: https://doi.org/10.1038/s41467-021-21852-7

IF: 16.6

2021-03-11

Nature Communications

Abstract:Abstract Transition metal oxides (TMOs) are promising electrochromic (EC) materials for applications such as smart windows and displays, yet the challenge still exists to achieve good flexibility, high coloration efficiency and fast response simultaneously. MXenes (e.g. Ti 3 C 2 T x ) and their derived TMOs (e.g. 2D TiO 2 ) are good candidates for high-performance and flexible EC devices because of their 2D nature and the possibility of assembling them into loosely networked structures. Here we demonstrate flexible, fast, and high-coloration-efficiency EC devices based on self-assembled 2D TiO 2 /Ti 3 C 2 T x heterostructures, with the Ti 3 C 2 T x layer as the transparent electrode, and the 2D TiO 2 layer as the EC layer. Benefiting from the well-balanced porosity and connectivity of these assembled nanometer-thick heterostructures, they present fast and efficient ion and electron transport, as well as superior mechanical and electrochemical stability. We further demonstrate large-area flexible devices which could potentially be integrated onto curved and flexible surfaces for future ubiquitous electronics.

multidisciplinary sciences
Full color control and patterned display device from cyan/magenta/yellow water-dispersed electrochromic polymer nanoparticles systems

Xiaojing Lv,Chunyan Liu,Mingfa Shao,Jin Li,Minao Xia,Jiankun Cui,Juncheng Dong,Mi Ouyang,Cheng Zhang

DOI: https://doi.org/10.1088/1361-6528/ad47cd

IF: 3.5

2024-05-08

Nanotechnology

Abstract:Electrochromic polymers (ECPs) have great application potential in flexible displays, and there is an increasing expectation of using green methods to form ECP films. Herein, we propose a modified microemulsion method to prepare Cyan/Magenta/Yellow (C/M/Y) water-dispersed electrochromic polymer nanoparticles systems. Three polymer films (WDECP-C/M/Y) maintain similar electrochemical properties compared to their corresponding organic solvent-based polymer films. It is intriguing that WDECP-C/M/Y exhibit better electrochromic properties in terms of higher cycling stability (97.24%, 95.05%, and 52.84%, respectively) and faster switching time (0.94 s, 1.09 s, and 1.34 s for coloring time, respectively) due to the introduction of nanoparticles. In addition, it can achieve various desired colors by blending the C/M/Y water-dispersed electrochromic polymer nanoparticles systems in different ratios. The calculated chromaticity coordinates of the blending polymer films show close values to the experimental observation, and the calculated ΔE*ab values range from 2.6 to 10.3, which may provide theoretical guidance for precisely color control. Finally, large-scale and patterned devices were assembled, which can achieve colored-to-colorless reversible electrochromism at a low driving voltage of 0 to 1.5 V. This work puts forward a universal and environmentally sustainable strategy to prepare water-dispersed electrochromic polymer nanoparticles systems, demonstrating their wide range of applications in display devices and electronic tags.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Tungsten Oxide Nanofibers for Electrochromic Device Application

Cigdem Dulgerbaki,Aliihsan Komur,Aysegul Uygun Oksuz

DOI: https://doi.org/10.33793/acperpro.01.01.152

2018-11-09

Academic Perspective Procedia

Abstract:The tungsten oxide (WO3) nanofibers were grown directly onto an ITO-coated glass via an electrospinning method for electrochromic applications. The electrochromic properties of WO3 nanofibers were investigated in the presence of different electrolytes including a series of ionic liquids and classic LiClO4-PC system. A significant optical modulation of 20.82% at 760 nm, reversible coloration with efficiency of 64.58 cm2/C and excellent cycling stability were achieved for the nanofiber electrochromic device (ECD) with ionic liquid based gel electrolyte.
Ultrathin flexible electrochromic devices enabled by highly transparent ion conducting films

Hui Gong,Ang Li,Guoxing Fu,Meiyu Zhang,Zilong Zheng,Qianqian Zhang,Hao Wang,KaiLing Zhou,JingBing Liu

DOI: https://doi.org/10.1039/d2ta09807e

IF: 11.9

2023-03-22

Journal of Materials Chemistry A

Abstract:The flexible electrochromic devices (ECDs) have generated widespread interest due to their attractive application prospects in emerging wearable and portable electronics, electronic papers/billboards and other advance displays applications. However, the lack of rational design for flexible electrochromic devices with both high flexibility and ultrathin natures still remain challenges, limiting its development toward practical applications. Herein, a flexible and ultrathin ion conducting film (ICF) is proposed by combining poly(vinylidene fluoride) polymer matrix with electrolyte to assemble into multicolor electrochromic devices. As a result, the as-obtained ICF exhibits extremely high visible-range transmittance over 90%, ionic conductivity of 0.11 mS cm-1 at room temperature, a large electrochemical window (3.55 V) and excellent mechanical flexibility, making it an excellent candidate for the electrochromic applications. By taking advantage of the ion conducting film, the fabricated ICF-based electrochromic device based on polyaniline (PANI) electrode exhibits reversible color transformations from chartreuse to green and dark blue, as well as ultrathin characterize, excellent flexibility and strong mechanical stability, superior to the behavior of the ECDs fabricated with traditional gel electrolytes. The electrochromic behavior in the PANI during the electrochemical process is comprehensively studied by density functional theory (DFT) calculations. In addition, the device also shows an effective electrochromism with multicolor properties at wide temperatures range (-10-60 °C). This work provides a feasible way for assembling high-performance flexible ECDs for the potential applications in multicolor displays and wearable electronics.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Dual-Functional Electrochromic Smart Window Using WO3·H2O-rGO Nanocomposite Ink Spray-Coated on a Low-Cost Hybrid Electrode

Pritha Dutta,Mohit Verma,Mayank S Paliwal,Indrajit Mondal,Mukhesh K Ganesha,Ritu Gupta,Ashutosh K Singh,Giridhar U Kulkarni

DOI: https://doi.org/10.1021/acsami.3c11337

2023-12-04

Abstract:Electrochromic windows have gained growing interest for their ability to change their optical state in the visible and NIR ranges with minimal input power, making them energy-efficient. However, material processing costs, fabrication complexity, and poor electrochromic properties can be barriers to the widespread adoption of this technology. To address these issues, electrochromic material and fabrication processes are designed to realize their potential as a cost-effective and energy-efficient technology. In this work, an electrochromic composite material-based ink is synthesized consisting of WO3·H2O nanoplates supported on rGO (reduced graphene oxide) nanosheets (WH-rGO), wherein an optimized amount of rGO (0.05 to 0.5 wt %) is introduced for providing a higher conduction pathway for efficient charge transport without sacrificing the electrochromic performance of WO3·H2O nanoplates. The stable ink dispersion prepared in the study is deposited by spray coating on transparent conducting electrodes over large areas (25 cm2). The WH-rGO nanocomposite (0.4 wt %) results in 43% optical modulation at 700 nm, with bleaching and coloration times of 6 and 8 s, respectively. Interestingly, the device also possesses an electrochemical energy storage capability with an areal capacitance of 16.3 mF/cm2. The electrochromic composite material is successfully translated on tin doped indium oxide (ITO)-coated Al metal mesh hybrid electrodes (T = 80%, Rs = 40 Ω/□) to replace ITO. Finally, an electrochromic device of 5 × 5 cm2 is fabricated by spray-coating the ink on cost-effective ITO/Al-mesh hybrid electrodes. The device displays blue to colorless modulation with an excellent bleaching time of 0.43 s and a coloration time of 2.16 s, making it one among the fast-operating devices fabricated by complete solution processing. This work showcases the economical production of a dual-function electrochromic device, which can be a feasible option as an alternative to existing ITO-based devices in both automotive and infrastructure applications.
Highly Transparent Conductive Reduced Graphene Oxide/Silver Nanowires/Silver Grid Electrodes for Low-Voltage Electrochromic Smart Windows.

K. Mallikarjuna,Haekyoung Kim

DOI: https://doi.org/10.1021/acsami.8b14086

2018-12-20

Abstract:Transparent conductive electrodes (TCEs) based on hybrid structures (silver nanowires) have been compressively reconnoitered in next-generation electronics such as flexible displays, artificial skins, smart windows, and sensors because of their admirable conductivity as well as flexibility, which make them favorable substitutes to replace ITO (indium tin oxide) as a transparent conductor. Nevertheless, silver-based TCEs grieve from poor stability because of the corrosion and oxidation of silver in electrolytes. To overcome these issues, a RGO (reduced graphene oxide) layer on silver was promoted to resolve the difficulties of corrosion and oxidation in the electrolyte. Moreover, we successfully designed and demonstrated low-voltage WO3-based electrochromic devices (ECDs) with fabricated hybrid TCEs. The hybrid electrodes with RGO/silver nanowires/metal grid/PET (RAM) electrode exhibited improvements in the switching stability and optoelectronic properties, such as the sheet resistance (0.714 ohm/sq) as well as optical transparency of 90.9%. The coloration and bleaching behavior of the ECD was observed in an applied low-voltage range of -1.0 to 0.0 V with a maximum optical difference of 72% at 700 nm, which yielded a coloration efficiency (η) of ∼33.4 cm2/C. The highly conductive hybrid TCEs exhibit favorable features for numerous embryonic flexible electronics and optoelectronic devices.

Engineering,Medicine,Materials Science
A practical approach for generation of WO3-based flexible electrochromic devices

Esin Eren,Mihrace Filiz Aydın,Aysegul Uygun Oksuz

DOI: https://doi.org/10.1007/s10008-020-04588-0

IF: 2.747

2020-04-01

Journal of Solid State Electrochemistry

Abstract:We managed to provide one-step facile electrochromic device (ECD) preparation to incorporate two cathodic coloring components into lithium ion (Li+)-doped UV-curable electrolyte. The hybrid-based flexible ECDs were fabricated by using tungsten trioxide (WO3) and poly(3,4-ethylenedioxythiophene) (PEDOT) as electrochromic components without the need for deposition procedures. The influences of lithium salts (lithium perchlorate (LiClO4) and lithium trifluoromethanesulfonate (LiTRIF)) on the electrochromic performance of flexible ECDs were evaluated. The electrochromic and the intrinsic kinetic features of all ECDs were investigated via transmittance and electrochemical impedance measurements. The ECD fabricated from LiClO4 electrolyte exhibited the highest optical transmittance modulation of 38.7% under an applied potential of ± 2 V. To evaluate the mechanical robustness of the flexible ECDs, a bending cycle test was also conducted. After performing repetitive bending cycle tests, the optical modulation of ECD fabricated from LiTRIF electrolyte was remained stable for applied potentials of ± 2 V. Especially, the flexible ECDs prepared from LiTRIF showed high mechanical bendability.

electrochemistry
A large-area, flexible, high contrast and long-life stable solid-state electrochromic device driven by an anion-assisted method

Lebin Wang,Xiang Zhang,Xi Chen,Xiaobai Li,Yingming Zhao,Wenjie Li,Jiupeng Zhao,Zhiyong Chen,Yao Li

DOI: https://doi.org/10.1039/d0tc04974c

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:The H 2 O content in Li + electrolyte can regulate the EC properties of NiO and ECDs. Large area flexible ECDs are investigated, exhibiting high optical modulation and long-life stability.

materials science, multidisciplinary,physics, applied
Electrochromic Device with A Polymer Ionic Conductor

YM ZHOU,PF GU,JF TANG

DOI: https://doi.org/10.1117/12.161955

1993-01-01

Abstract:The optical and electrochromic properties of tungsten oxide films deposited by e-beam evaporation were investigated. A laminated structure device was prepared. The as-deposited tungsten oxide film was used as the electrochromic film. A solid polymer electrolyte PPG- PMMA-LiClO4 was used as an ionic conductor. Spectrophotometric measurements show that the luminous transmittance of the device can be modulated between about 60% and 15%.
The Effect of Transparent Conducting Oxide Films on WO3-Based Electrochromic Devices with Conducting Polymer Electrolytes

Benedict Wen-Cheun Au,Kah-Yoong Chan,Gregory Soon How Thien,Mian-En Yeoh,Mohd Zainizan Sahdan,Hanabe Chowdappa Ananda Murthy

DOI: https://doi.org/10.3390/polym15010238

IF: 5

2023-01-04

Polymers

Abstract:Over the past few decades, electrochromism has been a prominent topic in energy-saving applications, which is based on the mechanism of altering the optical transmittance of EC materials under the effect of a small applied voltage. Thus, tungsten oxide (WO3) is a significant chemical compound typically applied in electrochromic devices (ECDs) as it is responsible for the optical transmittance variation. In this work, the WO3 films were produced through a sol–gel spin-coating method. The effect of various transparent conducting oxides (TCOs, which are indium-doped tin oxide (ITO), fluorine-doped tin oxide (FTO) glass substrates, and aluminum-doped zinc oxide (AZO)) was investigated in the construction of ECDs. Based on a conducting polymer polypyrene carbonate electrolyte, ITO and aluminum-doped zinc oxide (AZO)-coated glasses were also examined as counter electrodes. The electrode combination employing FTO and ITO as the TCO and counter electrode, respectively, exhibited the most significant coloration efficiency of 72.53 cm2/C. It had coloring and bleaching transmittance of 14% and 56%, respectively, with a large optical modulation of 42%. In addition to that, ECDs with the AZO counter electrode have the advantage of lower intercalation charges compared to ITO and FTO. Hence, this research offers a new avenue for understanding the role of common TCO and counter electrodes in the development of WO3-based ECDs with conducting polymer electrolytes.

polymer science

Flexible electrochromic devices based on tungsten oxide and Prussian blue nanoparticles for automobile applications

Electrochromic Polymers Based on 1,4-Bis((9H-carbazol-9-yl)methyl)benzene and 3,4-Ethylenedioxythiophene Derivatives as Promising Electrodes for Flexible Electrochromic Devices

Inorganic Multi-Color Transmissive-Type Electrochromic Electrodes Based on Fabry-Perot Interferometer for Full-Solid Smart Window

Flexible Pseudocapacitive Electrochromics via Inkjet Printing of Additive‐Free Tungsten Oxide Nanocrystal Ink

High-performance flexible electrochromic device based on facile semiconductor-to-metal transition realized by WO 3 ·2H 2 O ultrathin nanosheets

Galvanic-driven deposition of large-area Prussian blue film for flexible battery-type electrochromic device

Highly flexible electrochromic devices enabled by electroplated nickel grid electrodes and multifunctional hydrogels

Flexible Electrochromic Device on Polycarbonate Substrate with PEDOT:PSS and Color-Neutral TiO2 as Ion Storage Layer

Durable Electrochromic Devices Driven at 0.8 V by Complementary Chromic Combination of Metallo-Supramolecular Polymer and Prussian Blue Analogues for Smart Windows with Low-Energy Consumption

Fabrication of Nickel-Doped Tungsten Trioxide Thin Film-Based Highly Stable Flexible Electrochromic Devices for Smart Window Applications

Novel electrochromic materials based on chalcogenoviologens for smart windows, E-price tag and flexible display with improved reversibility and stability

Flexible and high-performance electrochromic devices enabled by self-assembled 2D TiO2/MXene heterostructures

Full color control and patterned display device from cyan/magenta/yellow water-dispersed electrochromic polymer nanoparticles systems

Tungsten Oxide Nanofibers for Electrochromic Device Application

Ultrathin flexible electrochromic devices enabled by highly transparent ion conducting films

Dual-Functional Electrochromic Smart Window Using WO3·H2O-rGO Nanocomposite Ink Spray-Coated on a Low-Cost Hybrid Electrode

Highly Transparent Conductive Reduced Graphene Oxide/Silver Nanowires/Silver Grid Electrodes for Low-Voltage Electrochromic Smart Windows.

A practical approach for generation of WO3-based flexible electrochromic devices

A large-area, flexible, high contrast and long-life stable solid-state electrochromic device driven by an anion-assisted method

Electrochromic Device with A Polymer Ionic Conductor

The Effect of Transparent Conducting Oxide Films on WO3-Based Electrochromic Devices with Conducting Polymer Electrolytes