Abstract:As a promising candidate to replace the brittle and expensive transparent indium tin oxide (ITO) conductor, the use of silver nanowire (AgNW) networks still involves issues such as high-temperature post-treatments and poor substrate adhesion for industrial application. Here a room-temperature soldering and one-step solution method is developed to achieve high-performance Ag nanowire transparent conductive films (TCFs). A nonconductive binder is prepared from poly(dopamine) and alginic acid which contains abundant catechol and carboxylic acid functional groups. The drying of the binder on the Ag nanowire percolation networks induces tighter contact among the nanowires and strong adhesion to the substrate, simultaneously enhancing the electrical and mechanical properties without a high-temperature annealing process. As a result, a highly conductive and bendable AgNW film is demonstrated on a low-cost polyethylene glycol terephthalate (PET) substrate, showing an 89% optical transmittance at λ = 550 nm and a sheet resistance of 16.3 Ohm sq(-1). Its optical and electrical performances are superior to those obtained from the reported indium tin oxide (ITO) films. Moreover, the AgNW film exhibits strong adhesion to the substrate, maintaining its conductivity after 100 tape tests, and it still resists the tape test even after exposure to solvent for several hours. Most importantly, the film shows good reliability during long-term 85 °C/85% RH (relative humidity) aging, which has been rarely investigated although it is a critical requirement for industrial application. The advanced and wide-ranging features of the prepared AgNW film greatly contribute to its use as a transparent electrode in multifunctional flexible electronic devices.

Transparent conductive films based on Ag nanowires and alginate hydrogel

Fabrication of Single Crystal Al Nanowire Array by Stress-induced Atomic Diffusion for Development of Transparent Conductive Film

A Water-Based Silver Nanowire Ink For Fabricating High Performance Transparent Conductive Films

A facile method for preparing transparent, conductive, and paper-like silver nanowire films

Cohesively Enhanced Conductivity and Adhesion of Flexible Silver Nanowire Networks by Biocompatible Polymer Sol–Gel Transition

Scalable coating and properties of transparent, flexible, silver nanowire electrodes

Highly Conductive and Uniform Alginate/Silver Nanowire Composite Transparent Electrode by Room Temperature Solution Processing for Organic Light Emitting Diode.

33‐4: Enhanced Adhesion and Stability of Silver Nanowire Transparent Electrode for OLED by Compositing with a Biocompatible Polymer Without High Temperature Treatment

Coating-free, air-stable silver nanowires for high-performance transparent conductive film

Highly Transparent and Thermal-Stable Silver Nanowire Conductive Film Covered with ZnMgO by Atomic-Layer-deposition

Highly Transparent, Conductive, Flexible Resin Films Embedded with Silver Nanowires.

Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

43.3: Room Temperature Solution Processing Silver Nanowire Transparent Electrode by Combining with a Biocompatible Polymer for Organic Light Emitting Diode

Efficient Protection of Silver Nanowire Transparent Electrodes by All-Biorenewable Layer-by-Layer Assembled Thin Films

Multilayer directionally arranged silver nanowire networks for flexible transparent conductive films

Electrospray deposition of silver nanowire films for transparent electrodes

Fabrication of silver nanowire transparent electrodes at room temperature

Preparation and Properties of Silver Nanowire-Based Transparent Conductive Composite Films

Surface-functionalized silver nanowires on chitosan biopolymers for highly robust and stretchable transparent conducting films

Large Scale Preparation of Silver Nanowires with Different Diameters by a One-pot Method and Their Application in Transparent Conducting Films

Fabrication of Flexible Transparent Conductive Films via an Energy-Efficient In Situ Chemical Welding and Reinforcement Strategy