Abstract:Porosity is an important characteristic of a filter textile, which affects permeability and retention properties. Determination of the inter-yarn and inter-fibre pore sizes of barrier textiles is also required to assess the filter behaviour of these textiles. In this study, a software tool was developed to detect the inter-fibre pore size distribution and pore size intensity of multifilament woven barrier fabrics using cross-section images. Fabrics were chosen according to their fabric construction parameters, such as the fabric index, weft yarn filament fineness and weft yarn structure (flat or textured). Microscopic cross-section images of weft yarns were taken, processed to binary images, and analysed with respect to the pore size distribution, number of pore lengths and pore intensity. It was also analysed how the fabric index, filament cross-section and filament fineness affect the inter-fibre pore lengths and separation level proposed. It was found that weft yarns with wider lengths and lower height showed wider inter-fibre pores. Inter-fibre pores decreased with a decrease in filament fineness. Moreover the separation level proposed deviated from the 90% level depending on the fabric index. This deviation was very small in samples with reduced filament fineness and textured samples. The separation level proposed will be useful to understand the effect of fabric construction parameters to obtain targeted properties regarding inter-fibre and inter-yarn pore size.

Image-analysis Techniques. Part I: The Measurement of Pore-size Distribution

Quantification and Characterization of Microporosity by Image Processing, Geometric Measurement and Statistical Methods: Application on Sem Images of Clay Materials

Monitoring of the Variation in Pore Sizes of Woven Geotextiles with Uniaxial Tensile Strain

Digital Image Analysis to Determine Pore Size Distribution of Filtration Materials

Change of pore size of woven geotextiles affected by uniaxial tension using image analysis method

Prediction of Pore Size Characteristics of Woven Slit-Film Geotextiles Subjected to Tensile Strains

Analysis of Pore Size Distributions of Nonwoven Geotextiles Subjected to Unequal Biaxial Tensile Strains

Measuring pore sizes of nonwoven geotextiles by X-ray CT images: a comparative evaluation

Analytical prediction and experimental research on pore size of nonwoven geotextiles under unconfined uniaxial tensile strain

New Image Analysis Method for Determination of the Inter-Fibre Pore Size Intensity of Polyester Woven Barrier Fabrics

The Effect Of Pore Size Deformation On Multi-Pore Model Of Woven Geotextiles In Tension Test

Experimental study on pore sizecharacteristics of wovengeotextiles subjected to unequal biaxial tensilestrains

An image-based method for obtaining pore-size distribution of porous media.

Image analysis to evaluate removal of particles from fabric surface

The porous size distribution obtained and analyzed by free access software

Comparison of Measured and Calculated Porosity Parameters of Woven Fabrics to Results Obtained with Image Analysis

Microfabric Analysis Technique for Granular Materials Based on Digital Images

Fluorescent Sizing Agents Based on Aggregation-Induced Emission Effect for Accurate Evaluation of Permeability and Coating Property

Microstructure characteristics of nonwoven geotextiles using SEM and CT methods

Study on the Means of Measuring Wet Permeability in Fabric by Image Processing Technique

Determination of the porosity in a bifacial fabric using micro-computed tomography and three-dimensional reconstruction