Abstract:During the last decade, due to an increase in anthropogenic activities, a higher environmental accumulation of heavy metals has been found, which has resulted in disturbed biogeochemical balance. Many kinds of remediation techniques have been practiced to mitigate heavy metal toxicity in the aqueous phase; however, adsorption is the most commonly accepted technique for efficient heavy metal removal. In this study, conocarpus waste was pretreated with 0%, 10%, and 20% kaolinite and pyrolyzed at 600 °C for 1 h to synthesize biochars (BC, BCK10, and BCK20, respectively), while hydrothermalized at 200 °C for 6 h to synthesize hydrochars (HC, HCK10, and HCK20, respectively). After characterization, synthesized materials were employed for the removal of cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) from contaminated water. Experimental data was further subjected to isotherm and kinetic models to estimate the adsorption mechanism. Among all the tested adsorbents, kaolinite-synthesized materials revealed comparatively higher adsorption compared to pristine materials. It was found that pH 7 was optimum for the maximum removal of tested heavy metals. Adsorption of tested heavy metals was well explained by Langmuir and Freundlich isotherms, while pseudo-second order and Elovich kinetics models fitted well for adsorption kinetics. The maximum adsorption capacity, as predicted by the Langmuir isotherm, was the highest for BCK20 (63.19 mg g−1 for Cd, 228.05 mg g−1 for Cu, 248.33 mg g−1 for Pb, and 45.79 mg g−1 for Zn) compared to the other tested materials, and for HCK20 (31.93 mg g−1 for Cd, 181.78 mg g−1 for Cu, 231.85 mg g−1 for Pb, and 45.72 mg g−1), it was higher than pristine HC. Isotherm and kinetics modeling data indicated that multiple mechanisms were involved in Cd, Cu, Pb, and Zn removal, such as chemisorption and electrostatic interactions. The amount of oxygen-containing surface functional groups and SiO2 particles could be responsible for the maximum adsorption of heavy metals by BCK20 and HCK20. Our findings suggest that biochar, hydrochar, and their kaolinite-modified composites possess the excellent potential to remove heavy metals from contaminated aqueous media, and could be further applied to treat wastewater to mitigate heavy metal toxicity for a sustainable environment.

Copper modified activated bamboo charcoal to enhance adsorption of heavy metals from industrial wastewater

Preparation of Magnetic Activated Carbon by Activation and Modification of Char Derived from Co-Pyrolysis of Lignite and Biomass and Its Adsorption of Heavy-Metal-Containing Wastewater

Facile preparation of scalable bamboo-derived activated carbon for efficient wastewater treatment

Adsorption of Cu (II) and Zn (II) in aqueous solution by modified bamboo charcoal

Intelligent-activated carbon prepared from pistachio shells precursor for effective adsorption of heavy metals from industrial waste of copper mine

Mechanisms for the Removal of Cd(II) and Cu(II) from Aqueous Solution and Mine Water by Biochars Derived from Agricultural Wastes.

Modification of coconut shell-based activated carbon and purification of wastewater

A Versatile EDTA and Chitosan Bi-Functionalized Magnetic Bamboo Biochar for Simultaneous Removal of Methyl Orange and Heavy Metals from Complex Wastewater

Adsorption of toxic metals from greywater using coconut husk biochar and spent green tea

Functionalized layered double hydroxides composite bio-adsorbent for efficient copper(II) ion encapsulation from wastewater

Kaolinite-Composited Biochar and Hydrochar as Low-Cost Adsorbents for the Removal of Cadmium, Copper, Lead, and Zinc from Aqueous Solutions

Study on Sewage Sludge-based Activated Carbons with Natural Mineral Modification for Enhanced Removal of Heavy Metal Ions from Aqueous Solution

Agro-waste based biomass residues valorization for effective adsorption of heavy metal

Conversion of crop, weed and tree biomass into biochar for heavy metal removal and wastewater treatment

A Novel Quickly Preparation Hmbc (Mnox-Obc) for High Adsorption Performance of Pb(Ii) and Cd(Ii): Behavior and Mechanism

Characterization and Potential of Samanea saman-Activated Carbon on Adsorption of Copper from an Aqueous Solution

A novel MnOx-impregnated on peanut shells derived biochar for high adsorption performance of Pb(II) and Cd(II): Behavior and mechanism

Recycling waste macadamia nut shells as a low hydrothermally engineered activated carbon for the efficient removal of a RIT navy blue textile dye from aqueous solutions

Enhanced adsorption of As(V) and Mn(VII) from industrial wastewater using multi-walled carbon nanotubes and carboxylated multi-walled carbon nanotubes

Biochar-based adsorption for heavy metal removal in water: a sustainable and cost-effective approach

Rapid and efficient removal of multiple heavy metals from diverse types of water using magnetic biochars derived from antibiotic fermentation residue