Facile synthesis of porous porphyrin-based polymers by solvent-crosslinking method

Xiaowei Jiang,Zhihong Liu,Libo Ma,Yu Tao,Yali Luo

DOI: https://doi.org/10.1039/d1nj03480d

IF: 3.3

2021-01-01

New Journal of Chemistry

Abstract:Three solvents were employed as crosslinkers to synthesise porous porphyrin-based polymers via Friedel–Crafts alkylation reaction.

chemistry, multidisciplinary

What problem does this paper attempt to address?

A Facile Self-Templating Synthesis of Carbon Frameworks with Tailored Hierarchical Porosity for Enhanced Energy Storage Performance.

Jie Yang,Gaoran Li,Meidan Cai,Pengju Pan,Zhoupeng Li,Yongzhong Bao,Zhongwei Chen

DOI: https://doi.org/10.1039/c7cc01463e

IF: 4.9

2017-01-01

Chemical Communications

Abstract:Herein, we present a facile synthesis of hierarchical carbon frameworks with microporous skeletons and interconnected meso/macropores by employing poly(vinylidene chloride-co-methyl acrylate)-b-polystyrene copolymers as precursors. The obtained porosity can be tuned over a broad range via well-selected block proportions of the precursor, enabling its advantageous applications in target-oriented energy storage systems.
Synthesis and CO2 Capture Behavior of Porous Cross-Linked Polymers Containing Pendant Triazole Groups

Junjie Zhu,Linbo Wu,Zhiyang Bu,Suyun Jie,Bo-Geng Li

DOI: https://doi.org/10.1021/acs.iecr.7b01961

2017-01-01

Industrial & Engineering Chemistry Research

Abstract:Porous cross-linked polymers containing pendant triazole groups were synthesized from glycidyl methacrylate (GMA) in the presence of divinylbenzene via high internal phase emulsion (HIPE) templating method followed by functionalization with sodium 3-amino-1,2,4-triazole (ATANa). They were characterized with FTIR, SEM, BET, and mercury intrusion and assessed as CO2 adsorbents. With interconnected hierarchical porous structure and abundant triazole groups which absorbed CO2 chemically in 1:1 stoichiometry, the adsorbents exhibited high CO2 adsorption capacity (3.6 mmol g(1), at 25 degrees C and 1 atm) and rate, and good CO2/N-2 selectivity (similar to 30). The adsorbents also displayed easy CO2 desorption with medium desorption heat (58 kJ/mol CO2), acceptable moisture endurance, and excellent recyclability. The results suggest that these functionalized porous polymers are potential adsorbents for CO2 capture
Hypercrosslinked Porous Polycarbazoles Via One-Step Oxidative Coupling Reaction and Friedel–Crafts Alkylation

Long Pan,Qi Chen,Jian-Hua Zhu,Jia-Guo Yu,Yu-Jian He,Bao-Hang Han

DOI: https://doi.org/10.1039/c4py01797h

IF: 4.6

2015-01-01

Polymer Chemistry

Abstract:Facile preparation of hypercrosslinked carbazole-based porous organic polymers via FeCl3-promoted one-step oxidative coupling reaction and Friedel–Crafts alkylation from the vinyl or hydroxymethyl functionalized carbazole is reported.
Porphyrin-based porous organic polymers synthesized using the Alder–Longo method: the most traditional synthetic strategy with exceptional capacity

Qian Liu,Wen Pan,Junshan Zhang,Mei Yang,Qin Chen,Feng Liu,Juan Li,Songrui Wei,Guoji Zhu

DOI: https://doi.org/10.1039/d4ra02277g

IF: 4.036

2024-01-01

RSC Advances

Abstract:Porphyrin-based POPs obtained via the Alder–Longo method are reviewed in this work from the aspects of their design, preparation, and applications as well as the challenges and opportunities for their future development.

chemistry, multidisciplinary
Facile One-Pot Synthesis of Porphyrin Based Porous Polymer Networks (ppns) As Biomimetic Catalysts.

Lanfang Zou,Dawei Feng,Tian-Fu Liu,Ying-Pin Chen,Stephen Fordham,Shuai Yuan,Jian Tian,Hong-Cai Zhou

DOI: https://doi.org/10.1039/c4cc09479d

IF: 4.9

2015-01-01

Chemical Communications

Abstract:Stable porphyrin based porous polymer networks, PPN-23 and PPN-24, have been synthesized through a facile one-pot approach by the aromatic substitution reactions of pyrrole and aldehydes. PPN-24(Fe) shows high catalytic efficiency as a biomimetic catalyst in the oxidation reaction of 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) in the presence of H2O2.
Design of Highly Photofunctional Porous Polymer Films with Controlled Thickness and Prominent Microporosity

Cheng Gu,Ning Huang,Yang Wu,Hong Xu,Donglin Jiang

DOI: https://doi.org/10.1002/anie.201504786

2015-01-01

Angewandte Chemie International Edition

Abstract:AbstractPorous organic polymers allow the integration of various π‐units into robust porous π‐networks, but they are usually synthesized as unprocessable solids with poor light‐emitting performance as a result of aggregation‐related excitation dissipation. Herein, we report a general strategy for the synthesis of highly emissive photofunctional porous polymer films on the basis of a complementary scheme for the structural design of aggregation‐induced‐emissive π‐systems. We developed a high‐throughput and facile method for the direct synthesis of large‐area porous thin films at the liquid–electrode interface. The approach enables the preparation of microporous films within only a few seconds or minutes and allows precise control over their thickness with sub‐nanometer precision. By virtue of rapid photoinduced electron transfer, the thin films can detect explosives with enhanced sensitivity to low parts‐per‐million levels in a selective manner.
Π-Conjugated Microporous Polymer Films: Designed Synthesis, Conducting Properties, and Photoenergy Conversions

Cheng Gu,Ning Huang,Youchun Chen,Leiqiang Qin,Hong Xu,Shitong Zhang,Fenghong Li,Yuguang Ma,Donglin Jiang

DOI: https://doi.org/10.1002/anie.201506570

2015-01-01

Angewandte Chemie

Abstract:AbstractConjugated microporous polymers are a unique class of polymers that combine extended π‐conjugation with inherent porosity. However, these polymers are synthesized through solution‐phase reactions to yield insoluble and unprocessable solids, which preclude not only the evaluation of their conducting properties but also the fabrication of thin films for device implementation. Here, we report a strategy for the synthesis of thin films of π‐conjugated microporous polymers by designing thiophene‐based electropolymerization at the solution–electrode interface. High‐quality films are prepared on a large area of various electrodes, the film thickness is controllable, and the films are used for device fabrication. These films are outstanding hole conductors and, upon incorporation of fullerenes into the pores, function as highly efficient photoactive layers for energy conversions. Our film strategy may boost the applications in photocatalysis, energy storage, and optoelectronics.
Synthesis of Porous Organic Polymers Via Catalytic Vapor-Assisted Solvent-Free Method

You Tao,Tian-Xiong Wang,Xuesong Ding,Bao-Hang Han

DOI: https://doi.org/10.1021/acs.macromol.2c01412

IF: 5.5

2022-09-15

Macromolecules

Abstract:Solvent-free synthesis is one kind of important approach for the preparation of porous materials. However, the catalytic vapor generated during these processes is limitedly reported. Herein, a novel catalytic vapor-assisted solvent-free method was established for the preparation of porous organic polymers (POPs) by application of catalytic vapor derived from ferric chloride. After investigating the decisive factors of this approach, its versatility is examined by synthesizing POPs from multitudinous monomers. Most importantly, this study provides evidence that catalytic vapor is a simple and efficient catalyst to a general synthetic pathway for POPs. The catalytic vapor-assisted solvent-free method for the preparation of POPs proposed in this paper provides a feasible idea for the development of chemical vapor synthesis for porous materials.

polymer science
Synthesis of Novel Ionic Porous Organic Polymers and Its Application in Hydroxyl Condensation Reaction

Yajuan Wang,Wenqiang Liu,Juan Zhang,Qingwen Shan

DOI: https://doi.org/10.1007/s10562-022-04110-3

IF: 2.936

2022-07-28

Catalysis Letters

Abstract:A novel ionic porous organic polymers catalysts were prepared and characterized by scanning electron microscopy, Brunner − Emmet − Teller measurements, fourier transform infrared spectroscopy and thermogravimetric analysis The characterization results showed that the synthesized catalyst was a porous polymer and had good heat stability. The catalytic performance of the catalyst was evaluated by synthesis of methacrolein from formaldehyde and propionaldehyde. The optimal reaction conditions were: the catalyst amount was 10%(wt%)of propionic aldehyde mass, the reaction temperature was 85 ℃, the reaction time was 1.5 h, the ratio of propionaldehyde and formaldehyde was 1:1.2. Under optimal condition, the conversion rate of propionaldehyde was up to 99.57% and the selectivity of methacrolein was 98.77%. The catalytic activity did not reduced obviously after being reused for 5 times. The reaction kinetics of synthesis of methacrolein was further studied. The results showed that the reaction order was 1.6, the activation energy was 50.28 kJ/mol and the pre-exponential factor was 4.17 × 107 (mol/L)−1.456/s.Graphical Abstract

chemistry, physical
Novel porphyrin-grafted poly(phenylene vinylene) derivatives: Synthesis and photovoltaic properties

Jichang Feng,Qinghui Zhang,Wang Li,Yang Li,Mujie Yang,Yong Cao

DOI: https://doi.org/10.1002/app.28321

IF: 3

2008-01-01

Journal of Applied Polymer Science

Abstract:A series of novel porphyrin-grafted poly (phenylene vinylene) derivatives, Porp-RO-PPV, were synthesized by a simple two-step method. These copolymers contain conjugated poly(phenylene vinylene) derivatives as polymer backbone and covalently linked porphyrin units as side chain, which were confirmed by FTIR and H-1 NMR, and used for photovoltaic devices. The thermal, optical properties and sensitizing effect, and photovoltaic properties have been investigated. The emission spectra of Porp-RO-PPV copolymers revealed the existence of strong energy transfer from PPV backbone to porphyrin units. The energy conversion efficiency (eta(e),) of photovoltaic devices based on Porp-RO-PPV+PCBM reached 0.33% (78.2 mW/cm(2), AMI.5) and porphyrin units in the copolymers showed good sensitizing effect at low concentration. (c) 2008 Wiley Periodicals, Inc.
Directing two copper porphyrin based polymers as highly efficient heterogeneous catalysts for styrene oxidation

Dingxuan Ma,Yaowen Zhang,Huihui Zhao,Kang Liu,Lei Wang

DOI: https://doi.org/10.1016/j.apsusc.2021.151363

IF: 6.7

2022-01-01

Applied Surface Science

Abstract:Porous organic frameworks (POFs) catalysts with a combination of the well-developed porosity and highly dispersed of active sites hold promise for boosting catalyst activity and selectivity. Among their many synthetic methods, one-step knitting strategies have gained superiority and potential for development. Here, two copper porphyrin based microporous polymers (SC-Cu and FC-Cu) were directly synthesized through Scholl coupling reaction and Friedel-Crafts alkylation reaction respectively, which possess high surface area and efficient catalytic performance for styrene oxidation. Moreover, the hierarchical pores of SC-Cu gave it a unique catalytic performance with various olefins with excellent conversion rate. The insight achieved by this systematic analysis will contribute to the rational design of other POFs catalysts and widening extent of applications.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Porous organic ligands (POLs) for synthesizing highly efficient heterogeneous catalysts.

Qi Sun,Miao Jiang,Zhenju Shen,Yinying Jin,Shuxiang Pan,Liang Wang,Xiangju Meng,Wangzhi Chen,Yunjie Ding,Jixue Li,Feng-Shou Xiao

DOI: https://doi.org/10.1039/c4cc03884c

IF: 4.9

2014-01-01

Chemical Communications

Abstract:We reported a universal route for synthesizing porous organic ligands (POLs) via solvothermal polymerization. The POLs were obtained quantitatively, showing high surface area, large pore volume, hierarchical porosity, and superior stability. The POL bearing a triphenylphosphine supported rhodium catalyst (Rh/POL-PPh3) exhibits high activity and excellent recyclability in 1-octene hydroformylation.
Synthesis of phenyl-based hyper-crosslinked porous organic polymers via Friedel-Crafts reaction for efficient organic dye adsorption

Shiyuan Zhou,Qi Lin,Zhongfei Ren,Congsheng Zhou,Yuhua Shan,Ping Liu

DOI: https://doi.org/10.1016/j.micromeso.2023.112765

IF: 5.876

2023-08-18

Microporous and Mesoporous Materials

Abstract:Hyper-crosslinked polymers (HCPs) with high specific surface areas and porous structural characteristics serving as adsorbents are currently a hot research topic. In this paper, a series of one-step 3D structured phenyl-based hyper-crosslinked porous polymers via Friedel-Crafts reaction namely POP-TB with different feeding ratios were successfully synthesized. POP-TB exhibits excellent adsorption performance towards four organic dyes including Rhodamine B, Acid green, Reactive blue, Crystal violet and the maximum adsorption capacity (q m ) are 1065, 2542, 1900 and 1270 mg g −1 , respectively, surpassing most of the adsorbents in previous reports.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
In Situ Synthesis of Porphyrin-Based Hyper-Cross-Linked Sub-nanometer Porous Polymer for Carbon Dioxide Adsorption Applications

Ala’a Al-Ghourani,Muhammad Al-Hayek,Bassem A. Al-Maythalony

DOI: https://doi.org/10.1021/acsanm.4c00249

IF: 6.14

2024-03-21

ACS Applied Nano Materials

Abstract:The immobilization of porphyrin molecules within porous materials using cost-effective methods holds significant importance. Herein an in situ synthetic strategy involves the condensation of imidazole aldehyde and pyrrole to create 5,10,15,20-tetra(1H-imidazol-5-yl)porphyrin, followed by a cross-coupling reaction to effectively integrate porphyrin units into a porous polymer (RSS-2). RSS-2 exhibited heightened permanent porosity, with a surface area measuring 655 m2/g, noteworthy nanoporosity at a pore size of 6 Å, and enhanced thermal stability, evidenced by a decomposition temperature of 430 °C. Moreover, RSS-2 exhibited a high adsorption capacity of 79 cm3.g–1, remarkable CO2 affinity (Qst 38 KJ.mol–1), and a CO2/N2 Henry’s selectivity of 255.

materials science, multidisciplinary,nanoscience & nanotechnology
Recent Progress of Amorphous Porous Organic Polymers As Heterogeneous Photocatalysts for Organic Synthesis

Yang Wang,Yong Yang,Qinghua Deng,Weibing Chen,Yongcai Zhang,Yong Zhou,Zhigang Zou

DOI: https://doi.org/10.1002/adfm.202307179

IF: 19

2023-01-01

Advanced Functional Materials

Abstract:The establishment of green and environmental friendly sunlight-driven organic reactions has received increasing attention since the 21st century. By virtue of their functional designability, micromesoporous structure, and thermal/chemical stability, porous organic polymers (POPs) have exhibited enormous promise in photocatalytic organic reactions as ideal potential alternatives to conventional small molecule and inorganic semiconductor catalysts. In particular, amorphous POPs are simplified in terms of preparation conditions and process flow. Herein, various amorphous POP materials based on polymers of intrinsic microporosity, hypercrosslinked polymers, conjugated microporous polymers, and porous aromatic frameworks are reviewed, while typical synthetic strategies are briefly introduced. It also highlights an overview of the research progress in photocatalytic oxidation, coupling, reduction, cycloaddition, and polymerization reactions at home and abroad in recent years. Finally, the challenges and prospects for future research on amorphous POPs are presented.
Porphyrinated Nanofibers Via Copolymerization and Electrospinning

Ling-Shu Wan,Jian Wu,Zhi-Kang Xu

DOI: https://doi.org/10.1002/marc.200600381

IF: 5.006

2006-01-01

Macromolecular Rapid Communications

Abstract:The first example of the synthesis of acrylonitrile copolymers with porphyrin pendants and the subsequent electrospinning of the resultant copolymers into nanofibers is presented in this communication. Vinyl porphyrin monomers have been synthesized and copolymerized with acrylonitrile through solution polymerization. FT-IR, NMR, UV-vis, and fluorescence spectroscopy are used to characterize the copolymers. Preliminary quantum chemical calculations have also been carried out to reveal the activity of the vinyl porphyrin monomers. Nanofibers with a diameter of around 330 nm are prepared by electrospinning the copolymer solutions. Their morphology and porphyrination are clearly observed by field-emission scanning electron rnicroscopy and fluorescence microscopy. It is speculated that this type of nanofiber may be a latent support of porphyrins for various purposes such as catalysis, molecular imprinting, sensors, and light/energy conversion.
Highly Efficient Heterogeneous Hydroformylation over Rh-Metalated Porous Organic Polymers: Synergistic Effect of High Ligand Concentration and Flexible Framework.

Qi Sun,Zhifeng Dai,Xiaolong Liu,Na Sheng,Feng Deng,Xiangju Meng,Feng-Shou Xiao

DOI: https://doi.org/10.1021/jacs.5b02122

IF: 15

2015-01-01

Journal of the American Chemical Society

Abstract:A series of diphosphine ligand constructed porous polymers with stable and flexible frameworks have been successfully synthesized under the solvothermal conditions from polymerizing the corresponding vinyl-functionalized diphosphine monomers. These insoluble porous polymers can be swollen by a wide range of organic solvents, showing similar behavior to those of soluble analogues. Rather than just as immobilizing homogeneous catalysts, these porous polymers supported with Rh species demonstrate even better catalytic performance in the hydroformylations than the analogue homogeneous catalysts. The sample extraordinary performance could be attributed to the combination of high ligand concentration and flexible framework of the porous polymers. Meanwhile, they can be easily separated and recycled from the reaction systems without losing any activity and selectivity. This excellent catalytic performance and easy recycling heterogeneous catalyst property make them be very attractive. These diphosphine ligand constructed porous polymers may provide new platforms for the hydroformylation of olefins in the future.
Twisted molecule-based hyper-crosslinked porous polymers for rapid and efficient removal of organic micropollutants from water

Ziyan Jia,Jiannan Pan,Chen Tian,Daqiang Yuan

DOI: https://doi.org/10.1039/c8ra04792h

IF: 4.036

2018-01-01

RSC Advances

Abstract:Four hyper-crosslinked porous polymers were synthesized by a facile method, and exhibited excellent adsorption performances for organic micropollutant removal from water.

chemistry, multidisciplinary
Solvothermal Synthesis of Highly Porous Polymers and Their Controllable Transition from Macro/mesoporosity to Meso/microporosity

Shu Wei,Dong-Xiao Lu,Jing Sun,Yan He,Longfeng Zhu,Yong-Lai Zhang,Feng-Shou Xiao

DOI: https://doi.org/10.1016/j.colsurfa.2012.08.012

2012-01-01

Abstract:Reported in this paper is a solvothermal synthesis of highly porous polydivinylbenzene. The nanoporous structures of the resultant polymers could be modulated from macro/mesoporosity to meso/microporosity by simply changing the amount of acetone solvent in the synthesis. A micro-phase separation during the solvothermal process was found to be the key factor for this transition in porous structures. The hierarchically porous polymers prepared here were characterized by N2 physi-sorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and contact angle testing. Experimental results show that these nanoporous polymers have large BET surface areas (up to 420m2/g), large pore volumes (up to 1.73cm3/g), and superhydrophobicity due to their highly porous structures, which make these nanoporous materials an excellent candidate for selective removal of toxic volatile organic compounds (VOCs). In the adsorption tests, the nanoporous polymers show outstanding adsorptive capacity and very high selectivity to organic compounds, giving a great potential for indoor VOCs removal.
Tetraphenylethylene-based Fluorescent Porous Organic Polymers: Preparation, Gas Sorption Properties and Photoluminescence Properties

Qi Chen,Jin-Xiang Wang,Fen Yang,Ding Zhou,Ning Bian,Xin-Jian Zhang,Chao-Guo Yan,Bao-Hang Han

DOI: https://doi.org/10.1039/c1jm11787d

2011-01-01

Journal of Materials Chemistry

Abstract:Tetraphenylethylene-based porous organic polymers were synthesized efficiently through a Suzuki coupling polycondensation or oxidative coupling polymerization. According to the obtained nitrogen physisorption isotherms, the Brunauer-Emmett-Teller specific surface area values for these porous materials vary between 472 and 810 m(2) g(-1). Using the same linker monomer, the specific surface area of copolymer materials (TPOP-3 or TPOP-5) prepared by two different core structural monomers (tetraphenylethylene and spirobifluorene) is higher than those of the respective homopolymers. Gravimetric hydrogen adsorption isotherms show that the adsorption capacity for hydrogen is up to 1.07 wt% at 1.13 bar and 77 K. Furthermore, incorporation of tetraphenylethylene moieties into these polymers can induce high photoluminescence (lambda(max): 530-610 nm) in the solid state. Thanks to the propeller-like structure and aggregation-induced emission characteristics, tetraphenylethylene is to be a promising building block for designing porous polymers with special properties.

Facile synthesis of porous porphyrin-based polymers by solvent-crosslinking method

A Facile Self-Templating Synthesis of Carbon Frameworks with Tailored Hierarchical Porosity for Enhanced Energy Storage Performance.

Synthesis and CO2 Capture Behavior of Porous Cross-Linked Polymers Containing Pendant Triazole Groups

Hypercrosslinked Porous Polycarbazoles Via One-Step Oxidative Coupling Reaction and Friedel–Crafts Alkylation

Porphyrin-based porous organic polymers synthesized using the Alder–Longo method: the most traditional synthetic strategy with exceptional capacity

Facile One-Pot Synthesis of Porphyrin Based Porous Polymer Networks (ppns) As Biomimetic Catalysts.

Design of Highly Photofunctional Porous Polymer Films with Controlled Thickness and Prominent Microporosity

Π-Conjugated Microporous Polymer Films: Designed Synthesis, Conducting Properties, and Photoenergy Conversions

Synthesis of Porous Organic Polymers Via Catalytic Vapor-Assisted Solvent-Free Method

Synthesis of Novel Ionic Porous Organic Polymers and Its Application in Hydroxyl Condensation Reaction

Novel porphyrin-grafted poly(phenylene vinylene) derivatives: Synthesis and photovoltaic properties

Directing two copper porphyrin based polymers as highly efficient heterogeneous catalysts for styrene oxidation

Porous organic ligands (POLs) for synthesizing highly efficient heterogeneous catalysts.

Synthesis of phenyl-based hyper-crosslinked porous organic polymers via Friedel-Crafts reaction for efficient organic dye adsorption

In Situ Synthesis of Porphyrin-Based Hyper-Cross-Linked Sub-nanometer Porous Polymer for Carbon Dioxide Adsorption Applications

Recent Progress of Amorphous Porous Organic Polymers As Heterogeneous Photocatalysts for Organic Synthesis

Porphyrinated Nanofibers Via Copolymerization and Electrospinning

Highly Efficient Heterogeneous Hydroformylation over Rh-Metalated Porous Organic Polymers: Synergistic Effect of High Ligand Concentration and Flexible Framework.

Twisted molecule-based hyper-crosslinked porous polymers for rapid and efficient removal of organic micropollutants from water

Solvothermal Synthesis of Highly Porous Polymers and Their Controllable Transition from Macro/mesoporosity to Meso/microporosity

Tetraphenylethylene-based Fluorescent Porous Organic Polymers: Preparation, Gas Sorption Properties and Photoluminescence Properties