Abstract:This work reports a new three-component composite which is consisted of dielectric carbon coated barium titanate hybrid particles (BT@C), thermal conductive silicon carbide nanoparticles (SiC NPs), and flexible poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP). The BT@C is synthesized via hydrothermal reaction of BT nanoparticles with glucose and further carbonized at 800 °C. The TEM images and Raman spectra reveal that the structure of carbon coating layer is high ordering graphitic carbon. Compared with the two-component BT@C/PVDF-HFP and SiC/PVDF-HFP composites, the three-component BT@C/SiC/PVDF-HFP composites show a positive synergistic effect of the two fillers in enhancing not only thermal conductivity but also dielectric constant. The results show that with the addition of 5.5 wt% and 10 wt% SiC NPs into BT@C-2(50 wt%)/PVDF-HFP composite, the thermal conductivity increases to 0.69 W m−1k−1 and 0.92 W m−1k−1 respectively (0.61 W m−1k−1 as control). For dielectric performance, the dielectric constant of BT@C-2(50 wt%)/PVDF-HFP increases from 80 to 1394 at 1 kHz with addition of 7.8 wt% SiC NPs. The dielectric constant is almost 158 times greater than that of pure PVDF-HFP (8.8, measured) and the dielectric loss tanδ is 0.9. These results show a good balance of dielectric performance. This method offers us a potential for the design and fabrication of polymeric dielectric composites which could be applied in electronic devices.

High-dielectric-permittivity high-elasticity three-component nanocomposites with low percolation threshold and low dielectric loss

Giant Dielectric Constant and Resistance-Pressure Sensitivity in Carbon Nanotubes/Rubber Nanocomposites with Low Percolation Threshold

Batio3-Carbon Nanotube/Polyvinylidene Fluoride Three-Phase Composites With High Dielectric Constant And Low Dielectric Loss

Improved dielectric and mechanical properties in Ti3C2Tx MXene-MoS2/Methyl vinyl silicone rubber composites as flexible dielectric materials

Tailored Dielectric Properties Based on Microstructure Change in Batio3-Carbon Nanotube/Polyvinylidene Fluoride Three-Phase Nanocomposites

High Dielectric Performance of Three-Component Nanocomposites Induced by A Synergetic Effect

BaTiO 3 @carbon/silicon carbide/poly(vinylidene fluoride-hexafluoropropylene) three-component nanocomposites with high dielectric constant and high thermal conductivity

Multiferroic Ceramic Composite with In Situ Glassy Barrier Interface and Novel Electromagnetic Properties

Enhanced Thermal Conductivity and Microwave Dielectric Properties by Mesostructural Design of Multiphase Nanocomposite

Elastomeric high-κ composites of low dielectric loss tangent: Experiment and simulation

Functionalized Graphene–batio3/ferroelectric Polymer Nanodielectric Composites with High Permittivity, Low Dielectric Loss, and Low Percolation Threshold

High dielectric constant and low dielectric loss hybrid nanocomposites fabricated with ferroelectric polymer matrix and BaTiO 3 nanofibers modified with perfluoroalkylsilane

Significant Ultra-low Percolation Threshold, Enhanced Positive Temperature Coefficient Effect and Dielectric Permittivity in Polymer-based Composites with Immiscible Polymers

Micro-nanosize Cofilled High Dielectric Permittivity Composites

Significantly Enhanced Low-Frequency Dielectric Permittivity in the Batio3/Poly(Vinylidene Fluoride) Nanocomposite

Hierarchical-structured Dielectric Permittivity and Breakdown Performances of Polymer-Ceramic Nanocomposites

Carbon Black-Batio3/silicone Rubber Electroactive Nanocomposites with Large Strain Coefficient

High Dielectric Performance Composites with a Hybrid BaTiO3/Graphene As Filler and Poly(vinylidene Fluoride) As Matrix

Boron nitride nanosheet-induced low dielectric loss and conductivity in PVDF-based high-k ternary composites bearing ionic liquid

Exploration of Unusual Electrical Properties in Carbon Black/binary-Polymer Nanocomposites

Flexible multi-walled carbon nanotubes/polydimethylsiloxane membranous composites toward high-permittivity performance