Abstract:The issue of environmental contamination, particularly caused by the existence of heavy metal particles, is a major and widely recognized subject that receives substantial global attention. The remediation of Cu(II), Cd(II), Ni(II), and Pb(II) ionic metal particles from synthetic wastewater using chemically treated plant leaves of Ageratum conyzoides (TAC) as a biosorbent was investigated. The biosorption process was implemented utilizing a batch system, wherein several operational parameters were considered, including temperature, pH, agitation time, biosorbent dosage, and initial concentration of the metal ion. Langmuir, Freundlich, Temkin, and D-R isotherm models were used to evaluate equilibrium data. The analyzed parameter exhibits characteristics that were best fitted with the Langmuir isotherm. The observed biosorption capacities (qm) of Cu(II), Pb(II), Ni(II), and Cd(II) ions on the TAC were measured as 51.573, 30.49, 33.53, and 35.91 mg/g, respectively, at a temperature of 22 °C. The affinity sequence of these metal ions follows the order Cu(II) > Pb(II) > Ni(II) > Cd(II). The measured values for the biosorption free energy change (ΔG) of Cu(II), Pb(II), Cd(II), and Ni(II) metal ions ranged from -1.017 to -4.723, -1.368 to -3.612, -2.785 to -5.21, and -1.047 to -5.135 kJ/mol, respectively. The enthalpy (ΔH) for Cu(II), Pb(II), Cd(II), and Ni(II) were determined to be +19.33, +6.82, +14.83, and +38.07 kJ/mol, respectively. Similarly, the corresponding entropy changes (ΔS) for the same series of metal ions were recorded as +0.075, +0.064, +0.063, and +0.135 kJ/mol.K. The pseudo-second-order kinetic models yielded superior outcomes in comparison to the pseudo-first-order kinetic models. The findings of the experiment indicated that the TAC demonstrates favorable efficacy in extracting all four metal ions. Hence, the utilization of biomass derived from Ageratum conyzoides leaves has proven to be a viable and economically feasible approach for biosorption of all four metals.

Optimization of Cadmium Ions Biosorption Onto Trichoderma Fungi

Isothermal Modelling of the Adsorption of Cadmium onto Activated Carbon from Tridax procumbens

Response Surface Method Analysis on Electro-Enhanced Technique for Remediation of Cadmium Contaminated Soil

Optimization analysis and mechanism exploration on the removal of cadmium from contaminated soil by electrokinetic remediation

Removal of Cadmium Ions from Synthetic Wastewater by using Pennisetum purpureum (Elephant Grass) as Low Cost Biodegradable Adsorbent (Biosorbent)

Biosorption of Cadmium onto Pseudomonas fluorescens: Application of Isotherm and Kinetic Models

Cadmium Removal from Aqueous Solution by Compound Bioflocculant: Equilibrium, Kinetics and Reuse Studies

Fungal biosorption of cadmium(II) onto Fennelia nivea from aqueous solution: equilibrium, thermodynamics, and kinetics

Kinetic Analysis of the Adsorption of Cadmium onto Activated Carbon from Tridax procumbens

A Novel Constructed Carbonate-Mineralized Functional Bacterial Consortium for High-Efficiency Cadmium Biomineralization.

Biosorption of Cadmium(Ii) from Aqueous Solutions by Industrial Fungus Rhizopus Cohnii

Process optimization and modeling of Pb(II) ions adsorption on a new and reusable biocomposite material using experimental design approach

Development of a Model to Predict the Effect of Water Chemistry on the Acute Toxicity of Cadmium to Photobacterium Phosphoreum

Statistical modelling, optimization, and mechanistic exploration of novel ureolytic Enterobacter hormaechei IITISM-SA3 in cadmium immobilization under microbial inclusive and cell-free conditions through microbially induced calcite precipitation

Study on strengthened the Cd(II) adsorption based on co-culture of fungi and cyanobacteria

A Comparison of Central Composite Design and Taguchi Method for Optimizing Fenton Process

Recent advancements in cadmium-microbe interactive relations and their application for environmental remediation: a mechanistic overview

Two Plant Growth Promoting Bacterial Bacillus Strains Possess Different Mechanisms in Adsorption and Resistance to Cadmium

Central Composite Design Optimization of Zinc Removal from Contaminated Soil, Using Citric Acid as Biodegradable Chelant

Optimization of Cd(II) Removal from Aqueous Solution with Modified Corn Straw Biochar Using Placket-Burman Design and Response Surface Methodology

Thermodynamic, kinetic, and equilibrium studies of Cu(II), Cd(II), Ni(II), and Pb(II) ion biosorption onto treated Ageratum conyzoid biomass