Abstract:<section class="article-section__content"><p>A design study was undertaken of a 100 kW natural gas solid oxide fuel cell (SOFC)/gas turbine (GT) hybrid system to evaluate the impacts of the reforming process under a broad range of SOFC fuel utilizations. An equilibrium reformer model and a one-dimensional SOFC model are employed to perform system study for this hybrid, while balance of plant model is built in Ebsion to simulate the associated performance of GT cycle. Fifty design cases with varied external fuel reforming temperatures are analyzed based on different SOFC fuel utilization levels. With the decrease of reforming temperature, optimal fuel utilization in terms of efficiency shift from 90% with external reforming to 60% with internal reforming. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy. And the feasibility of achieving high efficiencies in the hybrid system with thermally integrated external reforming will be explored in our future work.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Novelty Statement</h3><p>Both fuel reforming process and fuel utilization could affect the heat and energy balance in the hybrid gas solid oxide fuel cell (SOFC)-gas turbine (GT) system. However, the optimal design condition considering different fuel reforming approaches and SOFC fuel utilization levels was not determined in the literature. In addition, appropriate integration strategies, used to balance the heat and power between the two subsystems (SOFC and GT), are imperative under different fuel reforming approaches and SOFC fuel utilization levels. But, the feasibility of those thermal integration strategies has not been examined in existing studies. This work studied the coupling effects of SOFC fuel utilization and fuel reforming process on system performance of a natural gas hybrid SOFC/GT cycle. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy.</p></section>

Determination of an Empirical Transfer Function of a Solid Oxide Fuel Cell Gas Turbine Hybrid System Via Frequency Response Analysis

SOFC-GT Hybrid System Simulation Using a Distributed-Parameter SOFC Model

Coupling impacts of SOFC operating temperature and fuel utilization on system net efficiency in natural gas hybrid SOFC/GT system

Dynamic Simulation of a Pressurized 220kW Solid Oxide Fuel-Cell–Gas-Turbine Hybrid System: Modeled Performance Compared to Measured Results

Transfer Function Calculations for Aeroengine Combustion Oscillations

Flexible power generation based on solid oxide fuel cell and twin-shaft free turbine engine: Mechanical equilibrium running and design analysis

A Hardware-in-the-loop Simulation Approach for SOFC-MGT Hybrid Systems

Coupling effects of fuel reforming process and fuel utilization on the system performance of a natural gas solid oxide fuel cell/gas turbine hybrid system

Macroscopic modeling of solid oxide fuel cell (SOFC) and model-based control of SOFC and gas turbine hybrid system

Mechanical equilibrium operation integrated modelling of recuperative solid oxide fuel cell – gas turbine hybrid systems: Design conditions and off-design analysis

Mechanical equilibrium operation integrated modelling of hybrid SOFC – GT systems: Design analyses and off-design optimization

Thermodynamic sensitivity analysis of SOFC integrated with blade cooled gas turbine hybrid cycle

Probabilistic analysis of solid oxide fuel-cell integrated with gas turbine

Energy and exergy analyses of a hybrid system containing solid oxide and molten carbonate fuel cells, a gas turbine, and a compressed air energy storage unit

Performance Analysis of SOFC/micro-GT Hybrid System

High efficiencies with low fuel utilization and thermally integrated fuel reforming in a hybrid solid oxide fuel cell gas turbine system

The dynamic response of solid oxide fuel cell fueled by syngas during the operating condition variations

NUMERIC SIMULATION OF PARAMETER DISTRIBUTION AND TRANSIENT BEHAVIORS FOR SOFC-GT HYBRID SYSTEM

Thermodynamic analysis of solid oxide fuel cell & reheat and regenerative braysson cycle hybrid system integrated with steam generation

Design and optimization of a solid oxide fuel cell-inverted gas turbine integrated system with zero carbon emission for distributed cogeneration

A conceptual design of catalytic gasification fuel cell hybrid power plant with oxygen transfer membrane