Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

LiDAR Based Multi-Robot Cooperation for the 3D Printing of Continuous Carbon Fiber Reinforced Composite Structures

Robotic 3D Printing of Continuous Fiber Reinforced Thermoset Composites

Physically distributed multi-robot coordination and collaboration in construction

Large-scale deformation and damage detection of 3D printed continuous carbon fiber reinforced polymer-matrix composite structures

Robot-assisted laser additive manufacturing for high-strength/low-porosity continuous fiber-reinforced thermoplastic composites

Research on Large-Scale Additive Manufacturing Based on Multi-Robot Collaboration Technology

Aerial additive manufacturing with multiple autonomous robots

Design, fabrication and implementation of a high-performance compliant nanopositioner via 3D printing with continuous fiber-reinforced composite

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective

Carbon Fiber-Thermoplastic Composite 3D Printing Technology and Its Self-Monitoring

Direct-write 3D printing of UV-curable composites with continuous carbon fiber

Automated structural repair based on continuous carbon fiber reinforced plastic 3D printing and online model reconstruction

Exceptional mechanical performance by spatial printing with continuous fiber: Curved slicing, toolpath generation and physical verification

3D printed continuous fiber reinforced composite lightweight structures: A review and outlook

Multiscale concurrent design and 3D printing of continuous fiber reinforced thermoplastic composites with optimized fiber trajectory and topological structure

Design and 3D Printing of Continuous Fiber Reinforced Heterogeneous Composites

In situ repairing of continuous fiber-reinforced thermoplastic composite via multi-axial additive manufacturing

Operation of the Collaborative Composite Manufacturing (CCM) System

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance