Abstract:To eliminate a few specific elements from highly active liquid waste (HLW), two macroporous silica-based N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) and octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) impregnated polymeric composites, TODGA/SiO2-P and CMPO/SiO2-P, were synthesized. It was done by an advanced vacuum sucking technique through impregnation of the chelating agents into the pores of SiO2-P particles support. The partitioning of Sr(II), Pd(II), Zr(IV), Mo(VI), and Cs(I) from a 3.0M HNO3 solution containing some typically simulated fission and non-fission products Ru(III), Rb(I), Fe(III), Na(I), K(I), and Ba(II) was performed at 298 and 323K, respectively. In the first column packed with TODGA/SiO2-P, Sr(II), Pd(II), and Zr(IV) were adsorbed and eluted effectively by 0.01M HNO3, 0.05M DTPA-pH 2.5, and 0.5M oxalic acid, respectively, while others showed very weak or almost no adsorption and flowed into effluent along with 3.0M HNO3. Cs(I), Fe(III), and Mo(VI) containing effluent was then applied to the second column packed with CMPO/SiO2-P. Fe(III) and Mo(VI) were found to be adsorbed together and eluted utilizing 0.05M DTPA-pH 2 at 323K. The effective partitioning of Fe(III) was of great benefit to the evaporation, concentration, and finally geological disposal of HLW. The separation of Sr(II) and Mo(VI) was useful for the vitrification of HLW due to the Sr heat generator property and low solubility of Mo oxides in molten glass materials. Cs(I) can be separated by a novel silica-based 1,3-[(2,4-diethyl-heptylethoxy)oxy]-2,4-crown-6-calix[4]arene (Calix[4]arene-R14) impregnated polymeric composite (Calix[4]arene-R14/SiO2-P). In terms of the results obtained, a highly specific partitioning process of Fe(III) and some specific fission products Sr(II), Pd(II), Zr(IV), Cs(I), and Mo(VI) from a simulated HLW by extraction chromatography was proposed.

Impregnation of covalent organic framework into porous silica support for the recovery of palladium ions from simulated high-level liquid waste

Preparation and Characterization of a Novel Macroporous Silica-Bipyridine Asymmetric Multidentate Functional Adsorbent and Its Application for Heavy Metal Palladium Removal.

Preparation of a Macroporous Silica–pyridine Multidentate Material and Its Adsorption Behavior for Some Typical Elements

Preparation of A Macroporous Silica-Based Multidentate Soft-Ligand Material and Its Application in the Adsorption of Palladium and the Others

Synthesis of a Macroporous Silica‐based Derivative of Pyridine Material and Its Application in Separation of Palladium

Preparation of A Macroporous Silica-Based Pyridine Impregnated Material and Its Adsorption for Palladium

SPEC Process III. Synthesis of a Macroporous Silica-based Crown Ether-impregnated Polymeric Composite Modified with 1-Octanol and its Adsorption Capacity for Sr(II) Ions and Some Typical Co-existent Metal Ions

Molecular Modification of a Novel Macroporous Silica-Based Impregnated Polymeric Composite by Tri-N-butyl Phosphate and Its Application in the Adsorption for Some Metals Contained in a Typical Simulated HLLW.

Modification Of A Novel Macroporous Silica-Based Crown Ether Impregnated Polymeric Composite With 1-Dodecanol And Its Adsorption For Some Fission And Non-Fission Products Contained In High Level Liquid Waste

Silica-based covalent organic framework composite for efficient separation and enrichment of palladium and its heterogeneous catalysis application

Adsorption of Some Typical Fission Products onto a Novel Macroporous Silica-based Dialkyl Derivative of Pyridine Impregnated Material

Preparation of A Novel Silica-Based Dtbuch18c6 Impregnated Polymeric Composite Modified by Tri-N-Butyl Phosphate and Its Application in Chromatographic Partitioning of Strontium from High Level Liquid Waste

Highly Selective Adsorption for Palladium Removal by Impregnation Preparation of a Macroporous N-based Functional Composite

Experimental Study on the Basic Characteristics of a Novel Silica-Based CMPO Adsorbent

Preparation and Characterization of a Mesoporous Polycrown Impregnated Silica and Its Adsorption for Palladium from Highly Acid Medium

Removal of Pd(II), Zr(IV), Sr(II), Fe(III), and Mo(VI) from simulated high level liquid waste by extraction chromatography utilizing the macroporous silica-based polymeric materials

SPEC Process II. Adsorption of Strontium and Some Typical Co-Existent Elements Contained in High Level Liquid Waste Onto a Macroporous Silica-Based Crown Ether Impregnated Functional Composite

Development of Two novel silica based symmetric triazine-ring opening N-donor ligands functional adsorbents for highly efficient separation of palladium from HNO3 solution.

Preparation of a covalent organic framework-modified silica-gel composite for the effective adsorption of Pd(II), Zr(IV) and Mo(VI) from nitric acid solution

The Functionalized N-Rich Covalent Organic Framework for Palladium Removal from Nuclear Wastewater

Highly Selective Recovery of Palladium by A New Silica-Based Adsorbent Functionalized with Macrocyclic Ligand