Abstract:Acceptance sampling plans used in a typical quality control process, are developed to provide optimal sample size(s) and acceptance (rejection) criterion. In order to apply a sampling plan, a knowledge of acceptable quality level (AQL), a lot tolerance percent defective (LTPD), and the specification of two types of errors (type I and type II) are required. The traditional methods assume that quality control inspectors, inspection tools, and computation processes are free from any errors under normal conditions. However, it has been shown that in practice inspectors, inspection tools as well as computation processes are all erroneous. These errors will have significant impact on sample size(s), decision criterion, average outgoing quality (AOQ), and the operating characteristics curve (OC Curve).The impact of imperfect inspection on AOQ, sample size(s), and OC curves for a two stage sampling plan are presented in this paper. In a two stage sampling plan, the decision to reject or accept a lot is made through two tandem stages of the inspection process. The first stage inspection is performed at the low level component, where m components constitute a single item. An acceptance decision for a single item is made based on the observed number of defects (non-conformities), while an acceptance decision of a given lot depends on the number of defective (non-conforming) items.A simulation program has been developed to investigate the sensitivity of AOQ and OC curves when one or both types of errors (type I and type II) deviate from their specified levels. The computational experiments show that inspection errors cause the discrepancies between the computed values and the specified values. The analysis of simulation results leads us to conclude that, when inspection errors are present, the traditional sampling plans without inclusion of inspection errors are misleading and incorrect.

Acceptance sampling inspection plan for the Lindley and power Lindley distributed quality characteristics

Multiple Dependent State Sampling Inspection Plan for Lindley Distributed Quality Characteristic

Mixed Acceptance Sampling Plans for Product Inspection Using Process Capability Index

The integrated application of acceptance sampling in the quality control of manufacturing process and quality assurance of shipment product

Optimal Acceptance Sampling Testing Plan With Pivotal Quantity for Log-Location-Scale Distributions

Determination and economic design of repetitive group sampling plan under two parameter Lindley distribution

Attribute Sampling Plan for Submitted Lots Based on Prior Information and Bayesian Approach

Analysis of two stage sampling plan with imperfect inspection

Inspection tables for single acceptance sampling with crisp and fuzzy formulation of quality limits

Single acceptance sampling inspection plan based on transmuted Rayleigh distribution

Design of economically optimal acceptance sampling plans with inspection error

Developing a sampling plan by variables inspection for controlling lot fraction of defectives

Acceptance sampling plans based on failure‐censored step‐stress accelerated tests for Weibull distributions

Chain sampling plan (ChSP-1) for desired acceptable quality level (AQL) and limiting quality level (LQL)

Designing Bayesian New Group Chain Sampling Plan For Quality Regions

Variables sampling plans with PPM fraction of defectives and process loss consideration

Modified chain sampling plan for assuring percentile life under Weibull distribution and generalized exponential distribution

An application of time truncated single acceptance sampling inspection plan based on transmuted Rayleigh distribution

Acceptance sampling plan for truncated life test having generalized Pareto distribution

Sampling for quality inspection and correction: AOQL performance criteria

A new acceptance sampling plan using Bayesian approach in the presence of inspection errors