Abstract:Additive manufacturing, with its fast development and application of polymeric materials, led to the wide utilization of polylactic acid (PLA) materials. As a biodegradable and biocompatible aliphatic polyester, produced from renewable sources, PLA is widely used in different sectors, from industry to medicine and science. The aim of this research is to determine the differences between two forms of the PLA material, i.e., fused deposition modeling (FDM) printed filament and digital light processing (DLP) printed resin, followed by aging due to environmental and hygiene maintenance conditions for a period of two months. Specimens underwent 3D scanning, tensile testing, and Fourier transform infrared (FTIR) spectrometry to obtain insights into the material changes that occurred. Two-way Analysis of Variance (ANOVA) statistical analysis was subsequently carried out to determine the statistical significance of the determined changes. Significant impairment can be observed in the dimensional accuracies between both materials, whether they are non-aged or aged. The mechanical properties fluctuated for aged FDM specimens: 15% for ultimate tensile stress, 15% for elongation at yield, and 12% for elastic modulus. Regarding the DLP aged specimens, the UTS decreased by 61%, elongation at yield by around 61%, and elastic modulus by 62%. According to the FTIR spectral analysis, the PLA materials degraded, especially in the case of resin specimens. Aging also showed a significant influence on the elastic modulus, ultimate tensile stress, elongation at yield, elongation at break, and toughness of both materials, which was statistically shown by means of a two-way ANOVA test. The data collected in this research give a better understanding of the underlying aging mechanism of PLA materials.

Preparation and Photo-Oxidation Aging Behavior of Oriented Polylactic Acid

Enthalpy Relaxation And Embrittlement Of Poly(L-Lactide) During Physical Aging

Long-Term Thermal Stabilization of Poly(Lactic Acid)

Effect of biaxial stretching on the microstructure evolution, optical, mechanical and oxygen barrier properties of biodegradable poly(lactic acid) (PLA)/poly(butylene adipate- co -terephthalate) (PBAT) films

The aging behavior of degradable plastic polylactic acid under the interaction of environmental factors

Structure Evolution of Oriented Poly( l -lactic acid) Ultrathin Films during Deformation

Influence of ethylene oxide and gamma irradiation sterilization processes on the degradation behaviour of poly(lactic acid) (PLA) in the course of artificially accelerated aging

Preparation and Characterization of High-Melt-Strength Polylactide with Long-Chain Branched Structure Through Γ-Radiation-induced Chemical Reactions

Novel insights into photoaging mechanisms and environmental persistence risks of polylactic acid (PLA) microplastics: Direct and indirect photolysis

Effect of Aging on Tensile and Chemical Properties of Polylactic Acid and Polylactic Acid-Like Polymer Materials for Additive Manufacturing

Transparent, Heat-Resistant, Ductile, and Self-Reinforced Polylactide through Simultaneous Formation of Nanocrystals and an Oriented Amorphous Phase

Enhanced Strength, Toughness and Heat Resistance of Poly (lactic Acid) with Good Transparency and Biodegradability by Uniaxial Pre-Stretching

Oriented homo-epitaxial crystallization of polylactic acid displaying a biomimetic structure and improved blood compatibility.

Tuning the Rheological, Thermal, and Solid-State Properties of Branched PLA by Free-Radical-Mediated Reactive Extrusion

Physical aging-induced embrittlement of PLA/PBAT blends probed by tensile test and AFM nanomechanical mapping

Growth of molecular orientation during post‐process annealing of poly(lactic acid) containing a fibrous nucleating agent

Evolution of thermal behavior, mechanical properties, and microstructure in stereocomplexable poly(lactic acid) during physical ageing

Robust biaxially stretchable polylactic acid films based on the highly oriented chain network and "nano-walls" containing zinc phenylphosphonate and calcium sulfate whisker: Superior mechanical, barrier, and optical properties

Recent progress of preparation of branched poly(lactic acid) and its application in the modification of polylactic acid materials

Multiple shape memory behavior of highly oriented long-chain-branched poly(lactic acid) and its recovery mechanism

Polymorphic Crystal Transition and Lamellae Structural Evolution of Poly(p-dioxanone) Induced by Annealing and Stretching.