Automotive Displays: The Race is on Between LCD and OLED!

Karlheinz Blankenbach

DOI: https://doi.org/10.1002/msid.1244

2021-09-01

Information Display

Abstract:Abstract The annual number of automotive displays sold will nearly double from 2020 to 2028, according to Strategy Analytics. Local dimming LCDs and OLEDs compete for this expanding market for direct‐ view displays. Will we see the first microLEDs in cars at the end of this time frame?

What problem does this paper attempt to address?

46.1: Invited Paper: LCD Innovations vs. OLED Performance for Automotive Applications

Karlheinz Blankenbach

DOI: https://doi.org/10.1002/sdtp.16295

2023-04-01

SID Symposium Digest of Technical Papers

Abstract:LCDs are today's workhorse for automotive displays. In recent years, some premium OEMs started to ship cars with OLED displays. The advantages of OLEDs compared to LCDs are short response time at low temperature (relevant for e‐mirrors) and perfect black at night as well as highly curved and transparent versions. Replacing edge‐lit backlight of LCDs by FALD (full array local dimming) results in highest luminance at acceptable halo. Furthermore, LCDs have a large supply chain, which results in competitive cost. Well‐known challenges of OLEDs deal with high luminance and temperature sensitivity, which can result in reduced lifetime (LT) incl. Burn‐In. Challenges and solutions for LCDs and OLEDs such as halo measurements and viewing angle performance will be discussed more in detail. Latest automotive demonstrators show the potential of micro‐LEDs and electrically pumped Quantum Dots (QD) displays. Both have the potential to outperform LCDs and OLEDs.
Materials, Devices, Fabrication, Characterization, and Applications for Oled Illumination and Display

Jwo-Huei Jou,Yong Qiu,Saulius Grigalevicius,Etienne Baranoff

DOI: https://doi.org/10.1155/2012/878301

IF: 2.0981

2012-01-01

Advances in Materials Science and Engineering

Abstract:The estimated global revenue is to be $96 billion for lighting in 2012, and the same for flat panel display in 2018.Due to the numerous inherently disruptive advantages, such as being a plane light, very high in color rendering index, tunable color temperature, transparent, dimmable, humanfriendly, wide viewing angle, mercury free, sustainable raw materials, ultrathin, light weight, high contrast, fast response time and energy-saving, and so forth, organic light emitting diode (OLED) display and lighting will, sooner or later, take up a major portion of around $200 billion revenue and eventually disrupt the current markets.Nowadays, OLED technology is on the threshold of reliability for numerous more contemporary applications.Even OLEDs have already met the requirements for some commercial applications in portable electronics, such as cellular phones, car stereos, digital cameras, and digital watches, there still some challenges especially like further increasing the lifetime and efficiency, while keeping the manufacturing cost lower, quality better, and emissive area size larger.Recently, phosphorescent OLEDs had received a great deal of attention owing to their potential in achieving high efficiency, such as 100% internal quantum efficiency or 20% in external quantum efficiency (EQE), while 5% EQE for typical fluorescent OLEDs.In their review article, B. Diouf et al. discuss the key factors controlling the efficiency of phosphorescent OLEDs based on green and red emitting iridium complexes.The important factors discussed are exciton confinement, charge trapping, dopant concentration, and molecular structure of the materials.Interestingly, these
35‐1: Halo Mura of OLED and FALD LCD: Measurements and Perception for Automotive Displays

Karlheinz Blankenbach,Faraz Bhatti

DOI: https://doi.org/10.1002/sdtp.15512

2022-06-01

SID Symposium Digest of Technical Papers

Abstract:Halo mura affects visual quality of automotive displays. We report on two quantitative methods to measure halo of OLEDs and (FALD) LCDs. The relative halo “luminance” for an OLED is in the range of 0.01 %, which is about 10x larger than that of a state‐of‐the‐art FALD LCD. The decline of halo is exponential and spreads for more than 10 mm. By using the measurements of lines with a length of about 32 pixels as input for simulations, we can extract the halo of a single pixel. A user study resulted in moderate perception of halo at night for negative mode GUIs and relatively high insensitivity for positive mode.
Liquid crystal display and organic light-emitting diode display: present status and future perspectives

Hai-Wei Chen,Jiun-Haw Lee,Bo-Yen Lin,Stanley Chen,Shin-Tson Wu

DOI: https://doi.org/10.1038/lsa.2017.168

2017-12-01

Light: Science and Applications

Abstract:Recently, ‘Liquid crystal display (LCD) vs. organic light-emitting diode (OLED) display: who wins?’ has become a topic of heated debate. In this review, we perform a systematic and comparative study of these two flat panel display technologies. First, we review recent advances in LCDs and OLEDs, including material development, device configuration and system integration. Next we analyze and compare their performances by six key display metrics: response time, contrast ratio, color gamut, lifetime, power efficiency, and panel flexibility. In this section, we focus on two key parameters: motion picture response time (MPRT) and ambient contrast ratio (ACR), which dramatically affect image quality in practical application scenarios. MPRT determines the image blur of a moving picture, and ACR governs the perceived image contrast under ambient lighting conditions. It is intriguing that LCD can achieve comparable or even slightly better MPRT and ACR than OLED, although its response time and contrast ratio are generally perceived to be much inferior to those of OLED. Finally, three future trends are highlighted, including high dynamic range, virtual reality/augmented reality and smart displays with versatile functions.
Market competition, technology substitution, and collaborative forecasting for smartphone panels and supplier revenues

Chih-Hsuan Wang,Chih-Chen Liu

DOI: https://doi.org/10.1016/j.cie.2022.108295

2022-06-06

Abstract:Market competition coupled with technology substitution concurrently drive rapid progress and revolution of panel displays. Today, display technology has evolved from cathode ray tube (CRT), plasma display panel (PDP), liquid crystal display (LCD), organic light emitting diode (OLED), to mini/micro LED (MLED). Although technical characteristics including intensity, contrast, and duration have been significantly enhanced, it is still difficult for global leaders to forecast product sales because of intensive price variations and dynamic technology evolution. This research presents a novel framework to achieve the following goals: (1) Sales forecast for upstream panels is linked to demand for downstream consumer products, (2) Market competition between the top vendors, Samsung, LGD, and BOE, is included to reveal managerial insights, and (3) Technology substitution between OLED and LCD is captured in smartphone panels to estimate stable equilibriums. Experimental findings show the inclusion of smartphones, tablets, laptops, monitors, and flat TVs can significantly improve the performances of sales forecasting. Meanwhile, Samsung and LGD are mutually independent but LGD suffers from the existence of BOE. Lastly, technology substitution between OLED and LCD reveals global OLED shipments are expected to grow by 12.54% while Samsung's OLED revenues only increase by 3%.

computer science, interdisciplinary applications,engineering, industrial
Transistor Technologies and Pixel Circuit Design for Efficient Active-Matrix Organic Light-Emitting Diode Displays

Xiaojun Guo,Guangyu Yao,Xiaoli Xu,Wenjiang Liu,Tao Liu

DOI: https://doi.org/10.1145/2429384.2429532

IF: 3.652

2012-01-01

Computer-Aided Design

Abstract:Following the advent of the digital multi-media era and the popularity of the internet, high-resolution flat-panel displays (FPDs) are becoming the central feature of many consumer products, from camcorders, mobile/smart phones, to notebook PCs. The FPD industry has been dominated by the liquid crystal displays (LCDs), which are advancing so rapidly that it seems difficult for other technologies to compete in the marketplace, despite all the enthusiasm and innovation emerging from research laboratories in both universities and industry for decades. On the other hand, with the continuous development of related materials and device architectures for efficient and stable organic light emitting diodes (OLEDs), the commercialization of active matrix organic light emitting diode (AMOLED) display products is accelerating [1]. AMOLED displays provide a set of attractive attributes to be used for high-quality video applications, such as excellent contrast ratio, ultra-fast response, vivid visual full-color appearance, and mechanically, a thinner and simpler structure compared to LCDs. AMOLEDs are rapidly expanding their market share for small-sized mobile applications since their mass production launch in 2007, and are also expected to enter the arena of larger-area displays for TVs soon [2].
Designing configurable automotive dashboards on liquid crystal displays

F Bellotti,A De Gloria,A Poggi,L Andreone,S Damiani,P Knoll

DOI: https://doi.org/10.1007/s10111-004-0163-1

2004-10-12

Cognition, Technology and Work

Abstract:The instrument cluster is an important element of the automotive passive safety system, since it shows to the driver the status of the car’s signals. This role becomes even more important as the number of advanced driving assistance systems (e.g., frontal collision warning, night vision support, parking aids, adaptive cruise control) increases. However, the larger number of warnings and signals conflicts with the limited display area available in vehicle. The ACTIVE project has developed software programmable dashboards on liquid crystal displays (LCDs), studying an efficient exploitation of the visual space of the instrument cluster. Such displays are flexible in terms of customization and of runtime configurability, allowing changes to number, layout, and appearance of visible instruments according to the actual driving conditions. Moreover, configurable dashboards can become an open communication channel able to integrate and harmonize, according primarily to safety considerations, any kind of visual information coming from present and future information systems (e.g., concerning safety and infotainment). This paper contributes to the study of this emerging research field through the description of the flow of design we followed in developing a real in-car system, and through the analysis of the potential impact on users of such a new flexible interface. In particular, we discuss results of lab and road tests conducted at Robert Bosch GmbH in Germany.
34‐4: Late‐News Paper: Augmented Information by Graphics Pillar‐to‐Pillar RGB LED Display at the Base of the Windscreen: Design, Measurements & Evaluation

Matthias Eisenhardt,Steffen Reichel,Karlheinz Blankenbach

DOI: https://doi.org/10.1002/sdtp.16601

2023-06-01

SID Symposium Digest of Technical Papers

Abstract:Augmentation is highly valuable for traffic safety in manual drive, builds trust in ADAS functionality and well‐being in autonomous mode. HUDs and transparent displays have limitations. Video‐AR is easiest to implement but unergonomic. We prototyped and evaluated successfully a 150 cm wide graphics RGB LED display at the bottom of the windshield.
21‐1: Invited Paper: Technology Trend and Challenges for MicroLED Large Display Applications

Hsu Chen-Ke

DOI: https://doi.org/10.1002/sdtp.16543

2023-06-01

SID Symposium Digest of Technical Papers

Abstract:MicroLED is good technology for fine pitch (<P1.0) large display applications. From the TV and LED display history trend, people like larger display and better picture quality for immersion illusion. MiniLED COB become the main trend from year 2019, and next coming MicroLED technology is obviously direction. Sony already has CLEDIS in B and C series in the market. Samsung announced that MicroLED COG Display in 89", 101" and 114" in 2023 CES. This talk will be focus on MicroLED technologies for fine pitch large display. POB, POG and COG are technologies for different driving platform and their own advantages. MiP (MicroLED in Package) technology demonstrates advantages for fine pitch large display application.
High-Density Integration of Ultrabright OLEDs on a Miniaturized Needle-Shaped CMOS Backplane

Sabina Hillebrandt,Chang-Ki Moon,Adriaan J Taal,Henry Overhauser,Kenneth L Shepard,Malte C Gather

DOI: https://doi.org/10.1002/adma.202300578

Abstract:Direct deposition of organic light-emitting diodes (OLEDs) on silicon-based complementary metal-oxide-semiconductor (CMOS) chips has enabled self-emissive microdisplays with high resolution and fill-factor. Emerging applications of OLEDs in augmented and virtual reality (AR/VR) displays and in biomedical applications, e.g., as brain implants for cell-specific light delivery in optogenetics, require light intensities orders of magnitude above those found in traditional displays. Further requirements often include a microscopic device footprint, a specific shape and ultrastable passivation, e.g., to ensure biocompatibility and minimal invasiveness of OLED-based implants. In this work, up to 1024 ultrabright, microscopic OLEDs are deposited directly on needle-shaped CMOS chips. Transmission electron microscopy and energy-dispersive X-ray spectroscopy are performed on the foundry-provided aluminum contact pads of the CMOS chips to guide a systematic optimization of the contacts. Plasma treatment and implementation of silver interlayers lead to ohmic contact conditions and thus facilitate direct vacuum deposition of orange- and blue-emitting OLED stacks leading to micrometer-sized pixels on the chips. The electronics in each needle allow each pixel to switch individually. The OLED pixels generate a mean optical power density of 0.25 mW mm-2, corresponding to >40 000 cd m-2, well above the requirement for daylight AR applications and optogenetic single-unit activation in the brain.
A high-speed OLED monitor for precise stimulation in vision, eye-tracking, and EEG research

Olaf Dimigen,Arne Stein

DOI: https://doi.org/10.1101/2024.09.13.612866

2024-09-15

Abstract:The recent introduction of organic light-emitting diode (OLED) monitors with refresh rates of 240 Hz or more opens new possibilities for their use as precise stimulation devices in vision research, experimental psychology, and electrophysiology. These affordable high-speed monitors, targeted at video gamers, promise several advantages over the cathode ray tube (CRT) and liquid crystal display (LCD) monitors commonly used in these fields. Unlike LCDs, OLED displays have self-emitting pixels that can show true black, resulting in superior contrast ratios, a broad color gamut, and good viewing angles. More importantly, the latest gaming OLEDs promise excellent timing properties with minimal input lags and rapid transition times. However, OLED technology also has potential drawbacks, notably Auto-Brightness Limiting (ABL) behavior, where the local luminance of a stimulus can change with the number of currently illuminated pixels. This study characterized a 240 Hz OLED monitor, the ASUS PG27AQDM, in terms of its timing properties, spatial uniformity, viewing angles, warm-up times, and ABL behavior. We also compared its responses to those of CRTs and LCDs. Results confirm the monitor’s excellent temporal properties with CRT-like transition times (around 0.3 ms), wide viewing angles, and decent spatial uniformity. Additionally, we found that ABL could be prevented with appropriate settings. We illustrate the monitor’s benefits in two time-critical paradigms: Rapid “invisible” flicker stimulation and the gaze-contingent presentation of stimuli during eye movements. Ourfindings suggest that the newest gaming OLEDs are precise and cost-effective stimulation devices for visual experiments that have several key advantages over CRTs and LCDs.

Neuroscience
Progress on the Organic Light-Emitting Display

YANG Ding-yu,JIANG Meng-heng

DOI: https://doi.org/10.3969/j.issn.1006-6268.2007.08.012

2007-01-01

Abstract:Organic light-emitting display (OLED) have several advantages including self-luminous,less power consumption,wider viewing angle,lower cost and faster response time,and have been recognized as the most ideal technology of next generation flat-panel display. The article firstly introduced the electrodes and luminous materials of the organic electroluminescent devices,then make an emphasis on the OLED's latest research progress about driving technology and display panel. Finally,the future development foregrounds of OLED are also presented in this paper.
Research Progress on Organic Light-Emitting Display

YANG Dingyu,JIANG Mengheng,CHEN Min

DOI: https://doi.org/10.3969/j.issn.1005-5630.2008.01.020

2008-01-01

Abstract:Organic light-emitting display(OLED) have several advantages such as self-luminous,less power consumption,wider viewing angle and faster response time,and has become a strongly candidate in the next generation flat-panel display.Based on the introduction of research progress in organic luminous materials and display panel,the article mainly focused on the merits and disadvantages of two driving circuits which have been applied in OLED.The difficulties that need to be overcome among above vital technologies were also briefly analyzed here.Finally,the opportunities and challenges of OLED in the industrialization were presented in this paper.
29.1: Full Color Active Matrix OLED Displays with High Aperture Ratio

Jan Blochwitz‐Nimoth,Julia Brandt,Michael Hofmann,Jan Birnstock,Martin Pfeiffer,Gufeng He,Philipp Wellmann,Karl Leo

DOI: https://doi.org/10.1889/1.1825707

2004-01-01

Abstract:AbstractFor the integration of organic light emitting diodes (OLEDs) on an active matrix backplane, an efficient top‐emitting OLED is essential since the TFT‐circuitry covers a large space of the pixel aperture. Moreover, for the integration on n‐channel transistors used in amorphous silicon technology an inverted (anode on top) OLED setup is necessary.We here present a way to manufacture efficient top emitting inverted OLEDs on active matrix substrates by applying our proprietary technology of intentionally doped charge carrier transport layers. We demonstrate their integration in full color active matrix displays with QVGA and VGA resolution.
LCD Fights Back Against OLED With MiniLED Backlight Technology

Guillaume Chansin

DOI: https://doi.org/10.1002/msid.1201

2021-03-01

Information Display

Abstract:MiniLED technology gives LCD panels a chance to stay in the race against OLED for high‐end applications—especially in the advanced TV market. However, the cost may not always be competitive against OLED.
Flat panel display glass: Current status and future

Young Seok Choi,Jong Uk Yun,Seong Eun Park

DOI: https://doi.org/10.1016/j.jnoncrysol.2015.05.007

2016-01-01

Abstract:Since the appearance of the Active Matrix Liquid Crystal Display (AM-LCD) in 1995, flat panel display has been the fast growing industry during two decades [1]. Now LCD became the most dominant display technology world-wide. The flat panel display glass also has walked together along with the LCD industry. Great difficulties for manufacturing the flat panel display glass have given high entry barriers for the leading 3 companies: Corning, Asahi and NEG. These 3 companies occupy about 95% share of the flat panel display glass market [2]. However, these days, new players struggle to take significant part in the market. In this paper the detailed technological difficulties are analyzed.Display industry, however, these days in the turmoil of the big change. Plasma display panel (PDP) has not been displayed in the exhibitions or showcases. LCD is going through the mature stage of the industrial life cycle. Lots of ownership change and M&A have reported in the news. After that OLED and lots of touch application gadget appeared in the market. Even though these new devises also use flat glasses, the required attributes are different from those of LCD. The differentiation is important topic in the display industry. Flexible display is interesting theme in both glass and display field. Even though final product appears as a thin plastic display [3], all the manufacturing process happens on the glass substrates.In spite of the drastic change of the display industry, the glass production shows continuous growth. The need of larger screen does not show the saturation. The popularity of touchable hand held devices could continue in near future [4]. However all these situations are not the gospel for the glass industry. The display companies in the red ocean, push down the price of the glass with tremendous pressure. So in near future flat panel display glass also needs breakthrough for survival.

materials science, multidisciplinary, ceramics
Progress of display performances: AR, VR, QLED, and OLED

Ho Jin Jang,Jun Yeob Lee,Jaeyun Kim,Jeonghun Kwak,Jae-Hyeung Park

DOI: https://doi.org/10.1080/15980316.2020.1720835

2020-01-02

Journal of Information Display

Abstract:In 2019, the device performances of the display technologies were largely advanced by the development of new materials and of the device architecture and driving scheme. The recent progress in the areas of virtual reality (VR), augmented reality (AR), quantum dot light-emitting diode (QLED), and organic light-emitting diode (OLED) is comprehensively summarized and discussed in this paper.

materials science, multidisciplinary
9‐4: Late‐News Paper: Full Color Organic Light Emitting Diodes on Silicon Micro‐display with Ultra‐high Luminescence and High Resolution

Tengfei Liu,Changbing Qin,Yang Zhang,Weili Li,Jianbing Yang

DOI: https://doi.org/10.1002/sdtp.16498

2023-06-01

SID Symposium Digest of Technical Papers

Abstract:In order to satisfy the special demand of AR products for ultra‐high luminescence and high resolution full‐color silicon‐based OLED micro displays, a silicon‐based OLED micro display with resolution of more than 4000 ppi (0.36 inch with 1280×720) and a luminescence of more than 5000 nit is investigated. First, the design scheme of high‐resolution silicon‐based OLED driver is introduced. Based on the scheme of strong microcavity effect OLED device, the structure of red, green and blue monochrome luminescence enhancement is verified, and the current efficiency reaches 60 cd A ‐1 , 95 cd A ‐1 and 6 cd A ‐1 , respectively. Finally, the development of HD036 chip is finished, and the high luminescence full‐color silicon‐based OLED micro display device with ppi more than 4000, luminescence more than 5000 nit, and color gamut more than 85% is achieved. The effect of virtual reality overlay display is achieved by the verification of AR machine.
Which is a Better In-Vehicle Information Display? A Comparison of Google Glass and Smartphones

Xiaohui Wu,Jibo He,Jake Ellis,William Choi,Pingfeng Wang,Kaiping Peng

DOI: https://doi.org/10.1109/JDT.2016.2594263

2016-01-01

Journal of Display Technology

Abstract:In-vehicle information display is critical for driving safety and has been the focus of transportation and display technology research. Cellphone use, while driving is popular, leads to distraction and impairs driving performance. A new head-mounted display (HMD), Google Glass, has been developed in hope of reducing the visual distractions caused by a head-down display (HDD), such as a smartphone....
Mini-LED Backlight Technology Progress for Liquid Crystal Display

Zhiwen Gao,Honglong Ning,Rihui Yao,Wei Xu,Wenxin Zou,Chenxiao Guo,Dongxiang Luo,Hengrong Xu,Junlin Xiao

DOI: https://doi.org/10.3390/cryst12030313

IF: 2.7

2022-02-23

Crystals

Abstract:As consumers pursue higher display quality, Mini-LED backlight technology has become the focus of research in the current display field. With its size advantage (100–200 μm), it can achieve one-thousand-level divisional dimming, and it can also be combined with quantum dot technology to greatly improve the contrast, color gamut, dark state and other element of the display performance of LCD displays. Mini-LED backlight technology is undoubtedly the most ideal solution to realize a highly dynamic range display of LCD displays, and has been widely commercialized in many fields such as TVs, tablet computers, notebook computers, and car monitors. This review mainly introduces the efforts made by researchers to eliminate the halo effect, thinning of the backlight module and reducing the backlight power consumption. The application of quantum dot technology in backlight is also presented. We predict that the number of Mini-LED backlight partitions is expected to reach a level of more than 3000 in the future, further utilizing the advantages of the small size in local dimming, but it will also inevitably be challenged by some issues such as power consumption and heat dissipation.

materials science, multidisciplinary,crystallography

Automotive Displays: The Race is on Between LCD and OLED!

46.1: Invited Paper: LCD Innovations vs. OLED Performance for Automotive Applications

Materials, Devices, Fabrication, Characterization, and Applications for Oled Illumination and Display

35‐1: Halo Mura of OLED and FALD LCD: Measurements and Perception for Automotive Displays

Liquid crystal display and organic light-emitting diode display: present status and future perspectives

Market competition, technology substitution, and collaborative forecasting for smartphone panels and supplier revenues

Transistor Technologies and Pixel Circuit Design for Efficient Active-Matrix Organic Light-Emitting Diode Displays

Designing configurable automotive dashboards on liquid crystal displays

34‐4: Late‐News Paper: Augmented Information by Graphics Pillar‐to‐Pillar RGB LED Display at the Base of the Windscreen: Design, Measurements & Evaluation

21‐1: Invited Paper: Technology Trend and Challenges for MicroLED Large Display Applications

High-Density Integration of Ultrabright OLEDs on a Miniaturized Needle-Shaped CMOS Backplane

A high-speed OLED monitor for precise stimulation in vision, eye-tracking, and EEG research

Progress on the Organic Light-Emitting Display

Research Progress on Organic Light-Emitting Display

29.1: Full Color Active Matrix OLED Displays with High Aperture Ratio

LCD Fights Back Against OLED With MiniLED Backlight Technology

Flat panel display glass: Current status and future

Progress of display performances: AR, VR, QLED, and OLED

9‐4: Late‐News Paper: Full Color Organic Light Emitting Diodes on Silicon Micro‐display with Ultra‐high Luminescence and High Resolution

Which is a Better In-Vehicle Information Display? A Comparison of Google Glass and Smartphones

Mini-LED Backlight Technology Progress for Liquid Crystal Display