Abstract:Purpose: Computational models of microwave ablation (MWA) are widely used during the design optimization of novel devices and are under consideration for patient-specific treatment planning. The objective of this study was to assess the sensitivity of computational models of MWA to tissue biophysical properties. Methods: The Morris method was employed to assess the global sensitivity of the coupled electromagnetic-thermal model, which was implemented with the finite element method (FEM). The FEM model incorporated temperature dependencies of tissue physical properties. The variability of the model was studied using six different outputs to characterize the size and shape of the ablation zone, as well as impedance matching of the ablation antenna. Furthermore, the sensitivity results were statistically analyzed and absolute influence of each input parameter was quantified. A framework for systematically incorporating model uncertainties for treatment planning was suggested. Results: A total of 1221 simulations, incorporating 111 randomly sampled starting points, were performed. Tissue dielectric parameters, specifically relative permittivity, effective conductivity, and the threshold temperature at which they transitioned to lower values (i.e., signifying desiccation), were identified as the most influential parameters for the shape of the ablation zone and antenna impedance matching. Of the thermal parameters considered in this study, the nominal blood perfusion rate and the temperature interval across which the tissue changes phase were identified as the most influential. The latent heat of tissue water vaporization and the volumetric heat capacity of the vaporized tissue were recognized as the least influential parameters. Based on the evaluation of absolute changes, the most important parameter (perfusion) had approximately 40.23 times greater influence on ablation area than the least important parameter (volumetric heat capacity of vaporized tissue). Another significant input parameter (permittivity) had 22.26 times higher influence on the deviation of ablation edge shape from a sphere than one of the less important parameters (latent heat of liver tissue vaporization). Conclusions: Dielectric parameters, blood perfusion rate, and the temperature interval across which the tissue changes phase were found to have the most significant impact on MWA model outputs. The latent heat of tissue water vaporization and the volumetric heat capacity of the vaporized tissue were recognized as the least influential parameters. Uncertainties in model outputs identified in this study can be incorporated to provide probabilistic maps of expected ablation outcome for patient-specific treatment planning.

Simulation of Radiofrequency Ablation Including Water Evaporation

Simulating frequency-dependent dissipation in the CARI technique for breast tumors using the modified Szabo's wave model

A new coupled model for laser-induced thermal ablation accounting for tissue water vaporization

Comparison of Two Techniques for Radiofrequency Hepatic Tumor Ablation through Numerical Simulation

3D modeling of vector/edge finite element method for multi-ablation technique for large tumor-computational approach

Fast Calculation of 3D Radiofrequency Ablation Zone Based on a Closed-Form Solution of Heat Conduction Equation Fitted by Ex Vivo Measurements.

A computational model of open-irrigated radiofrequency catheter ablation accounting for mechanical properties of the cardiac tissue

Effect of energy dissipation on radiofrequency ablation model in cardiac tissue: modelling, analysis and numerical simulation

Modeling of Radiofrequency Ablation Lesions for Image-Guided Arrhythmia Therapy: A Preliminary ex vivo Demonstration

GPU-based Real-Time Approximation of the Ablation Zone for Radiofrequency Ablation

MRI-based Finite Element Simulation on Radiofrequency Ablation of Thyroid Cancer

Pennes' bioheat equation vs. porous media approach in computer modeling of radiofrequency tumor ablation

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

Sensitivity of microwave ablation models to tissue biophysical properties: A first step toward probabilistic modeling and treatment planning

Computer Simulations of Dual-Antenna Microwave Ablation and Comparison to Experimental Measurements

Mathematical study of a new coupled electro-thermo radiofrequency model of cardiac tissue

Theoretical modeling for radiofrequency ablation: state-of-the-art and challenges for the future

Heating Simulations of Pulsed High-Intensity Focused Ultrasound in the Presence of Heterogeneous Tissue

Temperature Simulation of an Ablation Needle for the Prediction of Tissue Necrosis during Liver Ablation

Physical modeling of conjugate heat transfer for multiregion and multiphase systems with the Volume-of-Fluid method