Abstract:To address the challenge of designing grouting reinforcement in a deep shaft to control water, this study established an elastic-plastic analytical formula for the grouted rock surrounding a shaft under the combined action of thermal, hydraulic, and mechanical fields based on the Mohr–Coulomb yield criterion. The various rules and influencing factors of stability and impermeability of the grouted rock surrounding the shaft are calculated and analyzed. The analysis shows that damage to the surrounding rock is aggravated by the action of high ground temperature and high water pressure in deep shafts, and the influence of water pressure is particularly significant. The larger the radius and cohesion of the grouted surrounding rock, the smaller the radius of its plastic zone. With an increase in the elastic modulus ratio between the grouted surrounding rock and the original rock, the radius of its plastic zone increases, so the elastic modulus of the grouted surrounding rock design should consider the original surrounding rock. With a decrease in the permeability coefficient of the grouted surrounding rock, the radial stress decreases, the tangential stress increases, and the radius of the plastic zone increases. The development of plastic zone not only affects the stability but also causes an increase in the permeability coefficient. There is mutual restriction and influence between the shaft water inflow, the permeability coefficient, the radius of the grouted surrounding rock, and the radius of its plastic zone. In the design of grouting reinforcement, the stability of surrounding rock and the control requirements of shaft water inflow should be comprehensively considered and the optimal parameters should be selected based on theoretical calculation. This study provides a theoretical basis for the optimization of grouting reinforcement parameters in a deep shaft.

Analysis on damage and rheological characteristics of deep surrounding rock of shaft engineering

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Analyzing Support Stability of Deep Shaft Based on Plastic Softening and Dilatancy of Hard Rock Mass

Stability Analysis of Jointed Rock Mass in Large Underground Caverns Based on Multi-Scale Analysis Method

Stability analysis and evaluation of surrounding rock of ultra-deep shaft under complicated geological conditions

Deformation and Failure Mechanism of Surrounding Rock in Deep Soft Rock Tunnels Considering Rock Rheology and Different Strength Criteria

Stability and rockburst tendency analysis of fractured rock mass considering structural plane

Analysis on Damage Characteristic and Depth of Surrounding Rock in Jinping Ii Deep Buried Tunnel

Investigation of Deep Shaft-Surrounding Rock Support Technology Based on a Post-Peak Strain-Softening Model of Rock Mass

Numerical Simulation of Deformation and Fracture Laws for Soft Rock Roadway in Deep Shaft Large Section

Damage evolution and stability analysis of the Jianchuandong Dangerous Rock Mass in the Three Gorges Reservoir Area

Discussion on Surrounding Rock Stress Induced Failure Mechanism in Deep Buried Tunnel

Stability Analysis of Surrounding Rock of Large Section Ultradeep Shaft Wall

Comparative Study of Phase Change Theory and Zonal Fracturing Field Measurements in Deep Surrounding Rocks

Damage constitutive model and mechanical properties of jointed rock mass under hydro-mechanical coupling

Theoretical analysis of grouting reinforcement for surrounding rock of deep shaft based on stability and water inflow control

3D Geomechanical Model Tests on Asymmetric Reinforcement and Overall Stability Relating to the Jinping I Super-High Arch Dam

Field and Numerical Study on Deformation and Failure Characteristics of Deep High-Stress Main Roadway in Dongpang Coal Mine

Numerical simulation of a new damage rheology model for jointed rock mass

Deformation and failure analysis of surrounding rock mass in deep buried tunnels subjected to excavation

Early estimation method of rockburst and large deformation of surrounding rock based on the deep borehole test