Abstract:Abstract Modern industrial gas turbines must be capable of operational flexibility to fulfill the requirements of a changing power industry. At one extreme, turbines are required to run for extended periods of time at full load conditions to satisfy base load applications. At the other extreme, turbines are exposed to high cycles to satisfy peaking applications. Industrial gas turbine components that operate in the hot gas path are therefore subjected to loads that can lead to damage from both creep and fatigue. The traditional design approach is based on worst case operational scenarios. These worst case assumptions compound and typically result in a single damage mechanism and bounding location, which represents the minimum life of the turbine. In contrast, condition based assessments tend to consider multiple operating scenarios, which may result in different damage mechanisms and potentially different bounding locations. Condition based assessments of gas turbines therefore require sophisticated lifing routines that can identify these peak damage locations for a range of damage mechanisms and load states, to ensure reliability and availability of industrial gas turbines for flexible operation. Digital assets are a key element of modern condition based maintenance. However, a large fleet of diversely operated gas turbines results in an equally large number of digital assets. This produces specific challenges around data processing and storage of large machine datasets. Full order methods, such as Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) are traditional approaches to predicting temperatures and loads on key components in industrial gas turbines. These models are computationally expensive and are therefore suited to idealized engine cycles. However, digital assets are used to analyze actual operational data and therefore require Reduced Order Models (ROMs) to manage large data sets within a reasonable time frame for optimal asset management. Key to this is determining the bounding assessment locations. Structural integrity design codes provide a number of methods for assessing key damage mechanisms. This paper presents a comprehensive framework to use elements from these various codes to identify life limiting locations. This is a critical aspect of developing effective digital assets for condition based asset management. The approach provides a qualitative assessment of damage based on simple elastic finite analyses for typical engine load cycles. The method identifies locations with a high potential for the fundamental damage mechanisms including: creep, fatigue and oxidation and it allows for the assessment of elastic shakedown and ratcheting. Creep assessments in design codes typically consider only stress rupture. However, for cooled gas path components the stresses are both thermally and mechanically driven. The stress rupture approach is therefore insufficient to capture the full effects of creep and may misidentify key locations. The approach presented here addresses this shortfall by additionally considering creep strain due to stress relaxation, in addition to other damage mechanisms.

A Dynamic Systems Based Approach to Estimate Cyclic and Creep Damage of a Power Turbine Blade Subjected to a Random Transient Operation

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

An Approach to Identify Bounding Damage Locations for Condition Based Structural Integrity Assessments of Gas Turbine Components

Constitutive Model Based Efficient Creep-Fatigue Damage Computation Technique for Steam Turbine Rotors to Enhance Flexible Operational Capabilities

Research on a Method for Online Damage Evaluation of Turbine Blades in a Gas Turbine Based on Operating Conditions

A Damage Evaluation Model of Turbine Blade for Gas Turbine

Continuum Damage Mechanics-Based Analysis of Creep–fatigue Interaction Behavior in a Turbine Rotor

Dynamic Surrogate Modeling Approach for Probabilistic Creep-Fatigue Life Evaluation of Turbine Disks

Dynamic Probabilistic-Based LCF Damage Assessment of Turbine Blades Regarding Time-Varying Multi-Physical Field Loads

Creep analysis and service life prediction of turbine blade with progressive damage

Patterns of Transverse Crack Growth in a Steam Turbine Rotor Model Under Dynamic Loading

A data-driven roadmap for creep-fatigue reliability assessment and its implementation in low-pressure turbine disk at elevated temperatures

Creep-fatigue Reliability Assessment for High-Temperature Components Fusing On-Line Monitoring Data and Physics-of-failure by Engineering Damage Mechanics Approach

Lifetime Prediction of Turbine Blade of Turbocharger for Diesel Engine Based on Fatigue and Creep Damage Model

Estimating Recoverable Performance Degradation Rates and Optimizing Maintenance Scheduling

Reliability-based Low-Cycle Fatigue Damage Analysis for Turbine Blade with Thermo-Structural Interaction

Multidisciplinary Prediction of Spatial-Temporal Evolution of Creep Damage on an Internally Cooled Turbine Vane

Physics of Failure approach to wind turbine condition based maintenance

Estimation of Fatigue Crack Growth at Transverse Vibrations of a Steam Turbine Shaft

Probabilistic-based Combined High and Low Cycle Fatigue Assessment for Turbine Blades Using a Substructure-Based Kriging Surrogate Model

Creep Failure Behavior of Notched Structure in the Simulated Steam Turbine Rotor: Experimental and Damage Analysis