Abstract:Introduction: The Loess Plateau has long been plagued by cascading loess landslides. The rapid identification of these landslides, along with the accurate determination of their failure modes, is essential for conducting precise disaster assessments in the region. Such assessments are critical for minimizing both human casualties and economic losses. However, the lack of reliable reference data for the early identification of landslide failure modes has resulted in limited detection accuracy, complicating the differentiation between various failure modes. Therefore, investigating the deformation and failure characteristics of loess landslides under different failure modes is crucial for providing a scientific foundation for early hazard detection and the accurate assessment of risk profiles. Methods: This work examines the pre-slip deformation and post-slip damage characteristics of the rotational-sliding Huzhu Landslide and the translational-sliding Zhongzhai Landslide through a combination of field investigations, unmanned aerial vehicle surveys, and remote sensing interpretation. Physical model tests were conducted to simulate the instability and failure processes of both rotational and translational loess landslides. Meanwhile, three-dimensional models and orthophoto graphic images at various stages of the landslides were generated using Contexcapture. Results: The initial stages of rotational sliding landslides are marked by the formation of distinct tensile cracks at the trailing edge of the slope and minor uplift at the front. As the uplift at the front progresses and numerous extension fissures develop, the stability of the landslide reduces progressively. Upon reaching instability, the sliding velocity of the sliding mass initially accelerates before decelerating, with majority of the mass remaining on the sliding surface and retaining relatively well structural integrity. At the trailing edge of the landslide, characteristic features such as falling scarps, fractured walls, and sunken grooves can be observed, while the front displays significant bulging phenomena. In contrast, translational sliding landslides are initially characterized by minor tensile cracks at the trailing edge and pronounced deformation at the front. As these tensile cracks propagate, the landslide are prone to sudden instability under external triggering factors. Following the onset of instability, the sliding mass undergoes rapid movement, with only a small part of the mass remaining on the sliding surface. Discussion: Landslides triggered by different factors and occurring under varying water content conditions may exhibit significant differences in their pre-failure behavior and post-failure characteristics. Thus, it is imperative to conduct further research in this field to better understand these complex dynamics.

Trigger mechanism of loess-mudstone landslides inferred from ring shear tests and numerical simulation

Experimental Study on the Failure Mechanism of the Zhoujiashan Landslide under the Combined Effect of Rainfall and Earthquake in Tianshui City, Northwest China

Periodic Recurrence and Scale-Expansion Mechanism of Loess Landslides Caused by Groundwater Seepage and Erosion

Red clay/mudstone distribution, properties and loess–mudstone landslides in the Loess Plateau, China

A mechanical insight into the triggering mechanism of frequently occurred landslides along the contact between loess and red clay

Physical and Mechanical Properties and Microstructures of Slip Soil of Loess Bedrock Contact Landslide

Mechanisms of wetting-induced loess slope failures

The formation mechanism of low-angle loess-mudstone seismic landslides

Investigating the Failure Mechanism of Loess-Mudstone Landslides with a High Water Content Interface Subjected to Earthquakes Through the Shaking Table Test

Characteristics and Initiation Mechanism of the Large Mudstone Dongping Landslide Induced by Heavy Rainfall in Gansu Province, NW China

Early identification on failure mode of loess landslide: insight from case study and physical model experiment

Mechanism Of Infiltration- Induced Loess Landslides

Direct and reversal shear behaviors of three kinds of slip zone soil in the Northwest of China

The mechanics of a saturated silty loess and implications for landslides

Occurrence of Landsliding on Slopes Where Flowsliding Had Previously Occurred: an Investigation in A Loess Platform, North-West China

Study of Strength Characteristics of High and Steep Slope Landslide Mass Loess

Permeability Characteristics, Structural Failure Characteristics, and Triggering Process of Loess Landslides in Two Typical Strata Structures

Rainfall- and Irrigation-Induced Landslide Mechanisms in Loess Slopes: An Experimental Investigation in Lanzhou, China

Field model experiments and numerical analysis of rainfall-induced shallow loess landslides

Landslides in the transitional slopes between a loess platform and river terrace, northwest China

Investigation on the Deformation and Failure Patterns of Loess Cut Slope Based on the Unsaturated Triaxial Test in Yan’an, China