Abstract:One major cause of to environmental pollution is industrial dye wastewater. The main purpose of current work was synthesis and investigation of effectiveness of LDH–Ferrite–Biochar–Polymeric composites for removal of anionic dye (Acid blue 41) from wastewater. The co-precipitation technique is used to synthesize Zn–Al Layered double hydroxide-Manganese ferrite–Egg Shell biochar–Starch (Zn–Al–MnFe 2 O 4 –ESB–Sta), Cu–Al Layered double hydroxide–Cadmium ferrite–Eucalyptus bark biochar–Chitosan (Cu–Al–CdFe 2 O 4 –EBB–Cs), Cd–Al Layered double hydroxide–Cobalt ferrite–Jujube wood biochar–Sodium alginate (Cd–Al–CoFe 2 O 4 –JWB–Na–Alg), Mn–Al Layered double hydroxide–Copper ferrite–Mulberry Stem Biochar–Starch (Mn–Al–CuFe 2 O 4 –MSB–Sta) and Co–Al Layered double hydroxide–zinc ferrite-peanut shell biochar–carboxymethyl cellulose (Co–Al–ZnFe 2 O 4 –PSB–CMC). According to findings of recent studies, Zn–Al–MnFe 2 O 4 –ESB-Sta (40.1 mg/g), Cu–Al–CdFe 2 O 4 –EBB–Cs (35.6 mg/g), Cd–Al–CoFe 2 O 4 –JWB–Na–Alg (28.1 mg/g), Mn–Al–CuFe 2 O 4 –MSB-Sta (37.3 mg/g) and Co–Al–ZnFe 2 O 4 –PSB–CMC (31.2 mg/g) has adsorption capacity for acid blue 41 dye. All composites achieved maximum adsorption effectiveness in acidic range (2–5), eliminating AB-41 dye in 45 min at optimal dose 0.05 g and 150 mg/l initial dye concentration was optimum. After 30 °C, adsorption potential decreased, indicating exothermic mechanisms. The efficiency was still adequate after five cycles of regeneration. The Pseudo 2nd order Kinetics and Freundlich isotherm model were successfully implemented among the applied models. The aforementioned composites are deemed the most cost-effective, energy-efficient, ecologically friendly, and biologically renewable materials for treating wastewater containing AB-41 dye. The results indicate that Zn–Al–MnFe 2 O 4 –ESB–Sta is the most effective synthetic composite for water remediation among all others. Furthermore, it was discovered in a column study that the ideal bed height, flow rate, and inlet concentration of dye were 3 cm, 3.6 ml/min, and 50 mg/l, respectively, for achieving the highest adsorption of AB-41 dye.

Box–Behnken Design for Optimizing the Synthesis Condition and Adsorption Capability of Covalently Crosslinked Chitosan/coal Fly Ash Composite

Physicochemical modification of chitosan with fly ash and tripolyphosphate for removal of reactive red 120 dye: Statistical optimization and mechanism study

Polymeric Matrix of Modified Chitosan with Algae and Coal Fly Ash for a Toxic Cationic Dye Removal: Multivariable Optimization by Box-Behnken Design

Zwitterion Adsorbent of Crosslinked Chitosan-Benzil/Algae/Coal Fly Ash for Anionic (Remazol Brilliant Blue R) and Cationic (Thionine) Dyes Removal: Box–Behnken Design Optimization

Facile preparation and application of magnetic chitosan/fly ash composite as a hybrid biosorbent for the effective removal of direct dyes

Fabrication of Schiff’s Base Chitosan-Glutaraldehyde/Activated Charcoal Composite for Cationic Dye Removal: Optimization Using Response Surface Methodology

Design of chitosan/boehmite biocomposite for the removal of anionic and nonionic dyes from aqueous solutions: Adsorption isotherms, kinetics, and thermodynamics studies

Utilization of chemically modified coal fly ash as cost-effective adsorbent for removal of hazardous organic wastes

LDH–Ferrite–Biochar–Polymeric Composites for Enhanced Adsorption–Desorption of Acid Blue 41 and Real Textile Wastewater Purification: A Batch and Column Study

An Eco-friendly Adsorbent of Chitosan/Montmorillonite/Algae for Removal of Basic Green 1 and Reactive Blue 19 Dyes: Box-Behnken Design Optimization Mechanistic Study

Magnetic biohybrid chitosan-ethylene glycol diglycidyl ether/magnesium oxide/Fe3O4 nanocomposite for textile dye removal: Box–Behnken design optimization and mechanism study

Characterization optimization of synthesis Chitosanclay/benzoin/Fe3O4 composite for adsorption of Thionine dye by design expert study

Facile fabrication of a low-cost carboxymethyl cellulose–polyacrylamide composite for the highly efficient removal of cationic dye: optimization, kinetic and reusability

Chitosan/functionalized fruit stones as a highly efficient adsorbent biomaterial for adsorption of brilliant green dye: Comprehensive characterization and statistical optimization

Optimized Hydrothermal Synthesis of Chitosan-Epichlorohydrin/Nanosilica for Efficient Reactive Dye Removal: Mechanistic Insights

Chitosan-Biopolymer-Entrapped Activated Charcoal for Adsorption of Reactive Orange Dye from Aqueous Phase and CO2 from Gaseous Phase

Recyclable chitosan adsorbent: Facile functionalization strategy, excellent removal capacity of dyes and adsorption mechanism

A comparative and comprehensive study on robust silver-immobilized chitosan/carboxy methyl chitosan macromolecules for elimination of dyes

Hydrothermal fabrication of composite chitosan grafted salicylaldehyde/coal fly ash/algae for malachite green dye removal: A statistical optimization

An eco-friendly chitosan-genipin/SiO2 composite for reactive orange 16 dye removal: Insights into adsorption statistical modeling and mechanism

Reusable kaolin impregnated aminated chitosan composite beads for efficient removal of Congo red dye: isotherms, kinetics and thermodynamics studies