Abstract:Clogging effect surrounding prefabricated vertical drains (PVDs) is a typical problem when vacuum preloading is applied to a dredged fill foundation. A large-scale model test was designed to clarify the cause and mechanism of the clogging effect, and the basic physical and mechanical parameters of the soil in the clogging zone were tracked during the test. The results demonstrated that a clogging zone was formed around the PVD in the early stage of improvement with conventional vacuum preloading, and the boundary of the clogging zone was approximately 0.2–0.4 of the boundary radius. The clogging zone surrounding the PVD was formed because of the overall movement of the soil toward the PVD under the high vacuum pressure gradient, rather than fine particle migration. The soil in the clogging zone exhibited permeability anisotropy and equivalent 'smear' effect. The permeability ratio (kh/kv) was less than 1, and the ratio of horizontal permeability coefficients at the test distances of 45 cm and 10 cm were 9.6 at a depth of 20 cm and 8.9 at a depth of 80 cm. An analysis of the microstructure of the soil in the clogging zone demonstrated that the clay particles tended to be vertically oriented. The re-orientation of the clay particles reduced the horizontal permeability coefficient and led to the permeability anisotropy of the soil in the clogging zone. Thus, decrease in the horizontal permeability coefficient and equivalent 'smear' effect of the soil in the clogging zone affect the consolidation of dredged fill, which leads to the clogging effect. The permeability anisotropy also slightly affects consolidation.

Numerical study on movements of soil particles forming clogging layer during vacuum preloading of dredged slurry

Numerical Study on Clogging of Prefabricated Vertical Drain in Slurry under Vacuum Loading

Calculation On The Settlement Of Dredged Slurry Treated By Vacuum Preloading Method With Consideration Of Clogging Effects

Formation mechanism of clogging of dredge slurry under vacuum preloading visualized using digital image technology

Radial Filtration Model of Clogging Column for Prefabricated Vertical Drain Treatment of Slurry

Effect of water content on clogging of dredged slurry under vacuum preloading from PIV perspective

Improving Consolidation of Dredged Slurry by Vacuum Preloading Using Prefabricated Vertical Drains (pvds) with Varying Filter Pore Sizes

The Effect of Initial Water Content on the Consolidation of Dredged Slurry under Vacuum Preloading

Large Strain Consolidation of Dredged Slurries Considering Clogging Effect with Coupled Vertical–radial Flow

A new approach for determining compressibility and permeability characteristics of dredged slurries with high water content

Vacuum Preloading Combined with Multiple-Flocculant Treatment for Dredged Fill Improvement

Influence of initial water content of dredged slurry on clogging effect under vacuum preloading

Experimental study on the clogging effect of dredged fill surrounding the PVD under vacuum preloading

Vacuum consolidation theory of dredged slurry considering nonlinear clogging behaviors

Effect of Sand on the Vacuum Consolidation of Dredged Slurry

Analytical solution on vacuum consolidation of dredged slurry considering clogging effects

The effect of PVD layout on the consolidation characteristics of dredged slurry under vacuum preloading

Theoretical Study on Consolidation of Slurry Treated by PHDs‐VP Considering Clogging Effect and Vacuum Preloading Process

Apparent clogging effect in vacuum-induced consolidation of dredged soil with prefabricated vertical drains

Soil behavior near the PVD filter and interpretation of clogging during vacuum preloading

Numerical Investigating on Representativeness of Tracers in PIV Model Test of Dredged Slurry Treated by Vacuum Preloading