Abstract:The production of crude oil is always accompanied by water production, which may create severe separation problems. It is important to understand the stabilization mechanism and parameters contributing to the formation of emulsion, specifically the synergy mixing of surfactants. These factors have not been studied primarily in previous studies. The main objective of the current work was to assess the influence of synergy mixing of nonionic surfactants, sorbitan monooleate (hexitol) and polysorbate 80 (glycol), which are mainly affecting the stability of oil-in-water emulsions. Several factors, such as the mixing rate, mixing time, and aging time of the studied emulsions were also investigated. Response surface methodology (RSM), and central composite design (CCD) were employed to design the experiments. Emulsion stability was measured through a static bottle test over a range of time (1–7 days) at a temperature of 60 °C. A model was established with a coefficient of determination value at 0.8814 and the highest emulsion stability achieved was 42.83%. The least water separation was observed at 0.5 v/v% hexitol, 1.5 v/v% glycol, 15 000 rpm mixing rate in 5 minutes, and seven-day ageing time to achieve ∼41.56% emulsion stability. The minimum emulsion stability of ∼25.0% was observed using 0.5 v/v% of sorbitan monooleate and polysorbate 80 at 5000 rpm of mixing rate in 15 min and under seven days of observation. The results also revealed that the mixing time and ageing time do not affect the stability of the prepared emulsions. Hexitol, mixing rate, synergy mixing of nonionic surfactants and polysorbate 80, and mixing speed significantly influence emulsion stability. The R 2 value of 88.14% verified that the model is well-fitted and the optimal values for the input variables were successfully obtained using RSM.

Optimization of Oil-in-Water Emulsion Stability: Experimental Design, Multiple Light Scattering, and Acoustic Attenuation Spectroscopy

Study and optimization of oil-in-water emulsions formulated by low- and high-frequency ultrasounds

Optimization of kerosene/oleic acid/water mixture for emulsion formation

Stability studies of high-stable water-in-oil model emulsions

Controlling The Stability And Rheology Of Copolyol Dispersions In Fatty Alcohol Ethoxylate (Aeo9)-Stabilized Multiple Emulsions

Stabilization of multiple emulsions using natural surfactants

Influence of Surfactant Structure on the Stability of Water-in-Oil Emulsions under High-Temperature High-Salinity Conditions

Destabilization of a model O/W/O double emulsion: From bulk to interface

Preparation of stable multiple emulsions using food-grade emulsifiers: evaluating the effects of emulsifier concentration, W/O phase ratio, and emulsification process

Investigation of the synergistic effect of nonionic surfactants on emulsion resolution using response surface methodology

Stability Analysis of Pure Oil-Water Emulsion in Gravity-Based Separators

Formulation of oil-in-water emulsions for pesticide applications: impact of surfactant type and concentration on physical stability

Formulation and Preparation of Water-In-Oil-In-Water Emulsions Loaded with a Phenolic-Rich Inner Aqueous Phase by Application of High Energy Emulsification Methods

Investigation of the Film Formation Mechanism of Oil-in-water (O/W) Emulsions

Influence of the Surfactant Type and Rotational Speed of the Rotary Disperser on the Stability of Emulsions in Oil-Water Systems

Quantification of Various Factors Affecting Emulsion Stability: Watercut, Temperature, Shear, Asphaltene Content, Demulsifier Dosage and Mixing Different Crudes

Another Multiparametric Way In Planning Of Experiments For O/W Emulsion Design

Real-Time Analysis of the Stability of Oil-In-Water Pickering Emulsion by Electrochemical Impedance Spectroscopy

A novel formulation of the pickering emulsion stabilized with silica nanoparticles and its thermal resistance at high temperatures