Abstract:Internal combustion engines represent the largest share of motor vehicle propulsion types. Despite the introduction of alternative drives (hybrid and electric), combustion engines will continue to be the main factor in the development of transport. Therefore, work related to their technological development and reduction of their harmful effects on human health and the environment is required. The development of internal combustion engines can be seen in two directions: technological changes resulting in increased efficiency of such engines and the second direction connected with limi-tation of exhaust gas emission. The present work is included in the second direction of research interests and concerns the analysis of various operating conditions of internal combustion engines. The operating states, both static and dynamic, determine the operational properties of internal combustion engines, such as fuel and energy consumption as well as pollutant emissions. So far, such operating conditions have only been mapped on a chassis dynamometer in various homologation tests. The course of the type approval test was known and the conditions of measurement were also known, which made it impossible to introduce a random factor into such tests. Currently, these properties are determined in tests performed in real vehicle operating conditions – RDE (Real Driving Emissions). Such tests are representing real operating conditions of motor vehicles. Limitations for performing tests in real traffic conditions are, apart from formal requirements concerning the duration and distance of individual parts, the dynamic conditions of vehicles determined by the speed and acceleration of the vehicle. The study analyzed the properties of vehicle speed processes and engine operating states in the RDE test, taking into account its individual phases – driving in urban, rural and motorway conditions. Engine operation states are the processes of the engine rotational speed and its rela-tive torque. It was found that the dynamic properties of the vehicle speed process are much more significant than the engine operating states. It was also found that the road emission of pollutants in the RDE test, which is the property of vehicles measured in the test, the motorway phase properties have greatest impact.

Determining if Exhaust Emission From Light Duty Vehicle During Acceleration on the Basis of On-Road Measurements and Simulations

Characterization of Exhaust CO, HC and NOx Emissions from Light-Duty Vehicles under Real Driving Conditions

Study on Exhaust Emission Test of Diesel Vehicles Based on PEMS

Analysis of the operation states of internal combustion engine in the Real Driving Emissions test

On-board Emission from Heavy-Duty Diesel Vehicle and Its Relationship with Driving Behavior

[Emission Characteristics of Light-Duty Gasoline Vehicle Exhaust Based on Acceleration Simulation Mode]

Measurement of rail vehicles exhaust emissions

Influences of accumulated mileage and technological changes on emissions of regulated pollutants from gasoline passenger vehicles.

Analysis of Non-Road Mobile Machinery Homologation Standards in Relation to Actual Exhaust Emissions

The effects of deterioration and technological levels on pollutant emission factors for gasoline light-duty trucks.

Study of On-Board Emission Measurement for Heavy-Duty Diesel Vehicle and Its Impact with Load

[Investigation of Emission Characteristics for Light Duty Vehicles with a Portable Emission Measurement System].

The Assessment of PM2.5 and PM10 Immission in Atmospheric Air in a Climate Chamber during Tests of an Electric Car on a Chassis Dynamometer

Using a Chassis Dynamometer to Determine the Influencing Factors for the Emissions of Euro VI Vehicles

Road Tests of a Two-Wheeled Vehicle with the Use of Various Urban Road Infrastructure Solutions

Capturing the Variability in Instantaneous Vehicle Emissions Based on Field Test Data

The Influence of the Type and Condition of Road Surfaces on the Exhaust Emissions and Fuel Consumption in the Transport of Timber

Analysis of exhaust emission processes during the Real Driving Emissions test

The Impact of Exhaust Emission from Combustion Engines on the Environment: Modelling of Vehicle Movement at Roundabouts

Assessment of Energy Consumption Characteristics of Ultra-Heavy-Duty Vehicles under Real Driving Conditions

Testing Research on Real World Emission Characteristics of Heavy Duty Vehicles and Influencing Factors