Abstract:Despite the great advancement and wide use of titanium (Ti) and Ti-based alloys in different orthopedic implants, device-related infections remain the major complication in modern orthopedic and trauma surgery. Most of these infections are often caused by both poor antibacterial and osteoinductive properties of the implant surface. Here, we have demonstrated a facile two-step laser nanotexturing and immobilization of silver onto the titanium implants to improve both cellular integration and antibacterial properties of Ti surfaces. The required threshold laser processing power for effective nanotexturing and osseointegration was systematically determined by the level of osteoblast cells mineralized on the laser nanotextured Ti (LN–Ti) surfaces using a neodymium-doped yttrium aluminum garnet laser (Nd:YAG, wavelength of 1.06 μm). Laser processing powers above 24 W resulted in the formation of hierarchical nanoporous structures (average pore 190 nm) on the Ti surface with a 2.5-fold increase in osseointegration as compared to the pristine Ti surface. Immobilization of silver nanoparticles onto the LN–Ti surface was conducted by dip coating in an aqueous silver ionic solution and subsequently converted to silver nanoparticles (AgNPs) by using a low power laser-assisted photocatalytic reduction process. Structural and surface morphology analysis via XRD and SEM revealed a uniform distribution of Ag and the formation of an AgTi-alloy interface on the Ti surface. The antibacterial efficacy of the LN–Ti with laser immobilized silver (LN–Ti/LI–Ag) was tested against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The LN–Ti/LI–Ag surface was observed to have efficient and stable antimicrobial properties for over 6 days. In addition, it was found that the LN–Ti/LI–Ag maintained a cytocompatibility and bone cell mineralization property similar to the LN–Ti surface. The differential toxicity of the LN–Ti/LI–Ag between bacterial and cellular species qualifies this approach as a promising candidate for novel rapid surface modification of biomedical metal implants.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.langmuir.2c00008.Cytocompatibility assessment of LN/LI Ti, Rockwell hardness analysis, cytocompatibility analysis, antibacterial activity analysis of different laser processed surfaces, viability of E. coli after exposure to Ti and LN–Ti/LI–Ag surfaces, surface elemental weight percentage analysis, and examples of topographic surface modification on titanium for dual response antibacterial and promote osteogenesis (PDF)This article has not yet been cited by other publications.

Microstructure, Mechanical and Antibacterial Properties of TiNb-Based Alloy Implanted by Silver Ions

Biocompatible Nanostructured Silver-Incorporated Implant Surfaces Show Effective Antibacterial, Osteogenic, and Anti-Inflammatory Effects in vitro and in Rat Model

Fabrication and evaluation of silver modified micro/nano structured titanium implant

Antibacterial effects and biocompatibility of titanium surfaces with graded silver incorporation in titania nanotubes.

Simultaneous improvement in mechanical properties, corrosion resistance and antibacterial properties of Ti-Ag sintered alloy with gradient nanostructure

Antibacterial Activity of Silver Doped Titanate Nanowires on Ti Implants

Enhancing antibacterial property of porous titanium surfaces with silver nanoparticles coatings via electron-beam evaporation

Effect of the Synergistic Interaction of Micro- and Nanostructures with Silver Ions on the Biocompatibility and Antimicrobial Properties of Ti-15Mo-2.5Ag

Antibacterial property and bioadaptability of Ti6Al4V alloy with a silvered gradient nanostructured surface layer

Introduction of Antibacterial Function into Biomedical TiNi Shape Memory Alloy by the Addition of Element Ag.

Investigation of magnetron sputtered nano-silver coating on titanium surface with micro-nanostructure

Electrophoretic deposition of photothermal responsive antibacterial coatings on titanium with controlled release of silver ions

Enhanced Bacteriostatic Properties of Ti Alloys by Surface Nitriding

A promising of alloying modified beta-type Titanium-Niobium implant for biomedical applications: Microstructural characteristics, in vitro biocompatibility and antibacterial performance

Enhanced silver loaded antibacterial titanium implant coating with novel hierarchical effect

Laser-Assisted Nanotexturing and Silver Immobilization on Titanium Implant Surfaces to Enhance Bone Cell Mineralization and Antimicrobial Properties

Silver Containing Antimicrobial Coatings on Innovative Ti-30Nb-5Mo β-Alloy Prepared by Micro-Arc Oxidation for Biomedical Implant Applications

[Preparation and Anti-Bacterial Tests of Silver-Modified Titanium Surface].

Implanting a Copper Ion into a TiO2 Nanorod Array for the Investigation on the Synergistic Antibacterial Mechanism between Mechanical Cracking and Chemical Damage

Synthesis and Antibacterial Properties of ZIF-8/Ag-Modified Titanium Alloy

Synthesis, characterization, antibacterial activity in dark and in vitro cytocompatibility of Ag-incorporated TiO2 microspheres with high specific surface area