Abstract:Refrigerant direct cooling technology has been gaining attention due to its advantages of simple system composition and high cooling efficiency, but its temperature control performance does not have advantages over mature liquid cooling in industrial applications, reasons for which should be discovered. This paper proposes a novel discrete model based on an electro-thermal coupling method and thermal resistance network to analyze the local temperature control performance of refrigerant direct cooling and liquid cooling systems under real operating scenarios with acceptable computing time and accuracy. The results show that the phase change of the refrigerant in the refrigerant direct cooling plate significantly affects the temperature control performance. The vapour-liquid two-phase zone has a high heat transfer capability, which can dissipate heat well and maintain a small temperature difference with the maximum temperature of the battery reduced by 28.3% compared with the liquid cooling system. There is a serious heat transfer deterioration in the superheated gaseous zone, causing a significant increase in the local battery temperature, and the maximum temperature difference is much higher than that in the liquid cooling system. When the refrigerant switches from two-phase to single-phase under 2C charging condition, the heat transfer coefficient reduces by roughly 73.6%, which causes the accompanying battery unit temperature to rise by about 12 ∼ 14 °C. Besides, the low refrigerant temperature will cause a large temperature difference in the vertical direction of the battery, which restricts the application of the refrigerant direct cooling system in practice. When the evaporation pressure increases from 300 kPa to 500 kPa, the temperature difference will decrease from 14.1 °C to 8.8 °C which is a 37.6% reduction. Through an in-depth analysis of the local temperature distribution of battery units, two burning questions were identified which deteriorate the temperature control performance of the refrigerant direct cooling system and results can provide directions for performance improvement.

Thermal analysis of car air conditioning

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Research on Two-stage Jet Refrigerant System with Water as Working Medium for Recycling Automotive Waste Heat

Performance analysis and simulation of automobile air conditioning system

Automotive air-conditioning system thermal performance assessment: an experimental approach combining first and second laws of thermodynamics

Performance Evaluation of an Automobile Air Conditioning System Using R134a

Performance analyses of an automobile air-conditioning system with R22/R124/R152A refrigerant

Temperature and Pressure Drop Analysis of Automobile Minichannel Condenser using CFD

Thermodynamic Performance of an Actual Thermo-Acoustic Refrigeration Micro-Cycle

Thermodynamic Analysis and Experimental Research of Water-Cooled Small Space Thermoelectric Air-Conditioner

ANALYSIS OF THE THERMAL PERFORMANCE OF DIRECT-CONTACT AIR-CONDITIONING SYSTEMS

Cooling performance and evaluation of automotive refrigeration system for a passenger car

Modeling and experimental evaluation of an automotive air conditioning system with a variable capacity compressor

Thermal performance analysis and burning questions of refrigerant direct cooling for electric vehicle battery

Entropy-statistical analysis of the air conditioning cycle of an aircraft

Air Conditioning Design for Comfort Impact on the Human Body in Small Vehicles

Experimental and numerical investigation on thermoelectric coolers for comparing air-to-water to air-to-air refrigerators

Thermodynamic analysis of two evaporator vapor compression refrigeration system with low GWP refrigerants in automobiles

Predictive control of car refrigeration cycle with an electric compressor

Exergy and Entransy Analyses in Air-Conditioning System Part 1—similarity and Distinction