Abstract:Microelectrode arrays have been extensively utilized to record extracellular neuronal activity for brain-machine interface applications. Modifying the microelectrodes with conductive polymers such as poly(3,4-ethylenedioxythiophene) (PEDOT) has been reported to be advantageous because it increases the effective surface area of the microelectrodes, thereby decreasing impedance and enhancing charge transfer capacity. However, the long term stability and integrity of such coatings for chronic recordings remains unclear. Previously, our group has demonstrated that use of the smaller counter ion tetrafluoroborate (TFB) during electrodeposition increased the stability of the PEDOT coatings in vitro compared to the commonly used counter ion poly(styrenesulfonate) (PSS). In the current work, we examined the long-term in vivo performance of PEDOT-TFB coated microelectrodes. To do so, we selectively modified half of the microelectrodes on NeuroNexus single shank probes with PEDOT-TFB while the other half of the microelectrodes were modified with gold as a control. The modified probes were then implanted into the primary motor cortex of rats. Single unit recordings were observed on both PEDOT-TFB and gold control microelectrodes for more than 12 weeks. Compared to the gold-coated microelectrodes, the PEDOT-TFB coated microelectrodes exhibited an overall significantly lower impedance and higher number of units per microelectrode specifically for the first four weeks. The majority of PEDOT-TFB microelectrodes with activity had an impedance magnitude lower than 400 kΩ at 1 kHz. Our equivalent circuit modeling of the impedance data suggests stability in the polymer-related parameters for the duration of the study. In addition, when comparing PEDOT-TFB microelectrodes with and without long-term activity, we observed a distinction in certain circuit parameters for these microelectrodes derived from equivalent circuit modeling prior to implantation. This observation may prove useful in qualifying PEDOT-TFB microelectrodes with a greater likelihood of registering long-term activity. Overall, our findings confirm that PEDOT-TFB is a chronically stable coating for microelectrodes to enable neural recording. Statement of significance: Microelectrode arrays have been extensively utilized to record extracellular neuronal activity for brain-machine interface applications. Poly(3,4-ethylenedioxythiophene) (PEDOT) has gained interest because of its unique electrochemical characteristics and its excellent intrinsic electrical conductivity. However, the long-term stability of the PEDOT film, especially for chronic neural applications, is unclear. In this manuscript, we report for the first time the use of highly stable PEDOT doped with tetrafluoroborate (TFB) for long-term neural recordings. We show that PEDOT-TFB coated microelectrodes on average register more units compared to control gold microelectrodes for at least first four weeks post implantation. We collected the in vivo impedance data over a wide frequency spectrum and developed an equivalent circuit model which helped us determine certain parameters to distinguish between PEDOT-TFB microelectrodes with and without long-term activity. Our findings suggest that PEDOT-TFB is a chronically stable coating for neural recording microelectrodes. As such, PEDOT-TFB could facilitate chronic recordings with ultra-small and high-density neural arrays.

Poly(3,4-ethylenedioxythiophene) (PEDOT) polymer coatings facilitate smaller neural recording electrodes

In vitro and in vivo evaluation of PEDOT microelectrodes for neural stimulation and recording

Nanostructured PEDOT Coatings for Electrode-Neuron Integration

Chronic intracortical neural recordings using microelectrode arrays coated with PEDOT-TFB

Electrodeposited PEDOT:BF4 Coatings Improve Impedance of Chronic Neural Stimulating Probes In Vivo

The Use of a Double-Layer Platinum Black-Conducting Polymer Coating for Improvement of Neural Recording and Mitigation of Photoelectric Artifact

Surface Modification of Neural Probes with Conducting Polymer Poly(hydroxymethylated-3,4-ethylenedioxythiophene) and Its Biocompatibility

Electrochemical Polymerization and Properties of PEDOT/S-EDOT on Neural Microelectrode Arrays

Evaluation of poly(3,4-ethylenedioxythiophene)/carbon nanotube neural electrode coatings for stimulation in the dorsal root ganglion

Electrochemical polymerization of poly(hydroxymethylated-3,4-ethylenedioxythiophene) (PEDOT-MeOH) on multichannel neural probes

A Polyimide-Based Flexible Optoelectrodes for Low-Noise Neural Recording

Double Electrode Experiments Reveal the Processes Occurring at PEDOT-Coated Neural Electrode Arrays

Methods of poly(3,4)-ethylenedioxithiophene (PEDOT) electrodeposition on metal electrodes for neural stimulation and recording

All-Polymeric Electrode Based on PEDOT:PSS for In Vivo Neural Recording

Nanofibrous PEDOT-Carbon Composite on Flexible Probes for Soft Neural Interfacing

Long term performance of porous platinum coated neural electrodes

In Vivo Electrochemical Analysis of a PEDOT/MWCNT Neural Electrode Coating

PEDOT:PSS-coated platinum electrodes for neural stimulation

Electropolymerization processing of side-chain engineered EDOT for high performance microelectrode arrays

Ultraflexible PEDOT:PSS/IrOx-Modified Electrodes: Applications in Behavioral Modulation and Neural Signal Recording in Mice

Facile synthesis and characterization of Poly (3, 4-ethylenedioxythiophene)/Molybdenum disulfide (PEDOT/MoS2) composite coatings for potential neural electrode applications