Abstract:The membrane extraction of copper ions was carried out using hydrophobic poly(propylene) (PP) hollow fiber membrane modules and kerosene solutions containing organic extractant. The influences of different extractant on the extraction yield, mass transfer performance and mass transfer mechanism were studied. Compared with 2-ethylhexyl phosphoric acid (2EHPA) and 2-methyl-5-sulpho benzaldoxime (2M5SB), di-(2-ethylhexyl)phosphoric acid (D2EHPA) extractant system with high distribution coefficient exhibited higher extraction yield of 99.7%. The extraction equilibrium time, the final extraction yield and the total mass transfer coefficient were independent of the flow rates of two phases. The extraction equilibrium time and the final extraction yield at different flow rates of two phases were 80 min and near 99.5%, respectively. A mass transfer model of a complexation reaction describing the overall mass transfer resistance was controlled by interfacial reactions rather than the aqueous and organic boundary layer which could explain the effect of flow rate on the final extraction yield and the total mass transfer coefficient. This model showed that the mass transfer resistance and mass transfer coefficient were independent Of Cu2+ when copper ion concentration was more than 0.06 g/L. However, when copper concentration was less than 0.06 g/l, the mass transfer resistance increased as Cu2+ concentration decreased, and the mass transfer coefficient decreased as Cu2+ concentration decreased. Extractant entrainment in the aqueous phase and membrane fouling were investigated primarily. It was found that the solvent entrainment could reduce to 10ppm much lower than 200ppm of the classic liquid-liquid extraction, and that the cleaning of contaminated membranes was not complete. However, it can be still concluded from this research that the membrane extraction in PP hollow fibre with D2EHPA extractant would be an effective and promising processing means for Cu2+ separation from aqueous solution. Copyright (c) 2005 John Wiley & Sons, Ltd.

Hollow-Fiber Membrane Extraction of Copper from Aqueous Nitrate Media by LIX® Reagents: Comparison of Extraction Efficiency and Fractional Resistances

EXTRACTION OF COPPER(Ⅱ)ION BY CHEMICAL COMPLEXATION WITH LIX984

Transport of Copper(II) Ion in Supported Liquid Membrane

Solvent Extraction of Copper from Sulfate–Chloride Solutions Using LIX 84-IC and LIX 860-IC

Membrane Extraction For Separation Of Copper Cations From Acid Solution Using Polypropylene Hollow Fibre Membrane

Extraction of Cu(II) with Acorga M5640 using hollow fibre liquid membrane

Extraction of Copper from Sulfuric Acid Solutions Based on Pseudo-Liquid Membrane Technology

Extraction of Copper from Bacterial Leach Solution Using LIX98

Solvent Extraction of Copper from Ammonia Solutions by Sterically Hindered Β-Diketone and LIX 84

Solvent extraction equilibrium modeling for the separation of ammonia, nickel(II), and copper(II) from the loaded LIX84-I

Kinetics of Extracting Copper with Lix54-100 Using the Modified Growing Drop Method

Extraction of Copper Using Metal Extractant Mextral~ 973H

A Study on the Kinetics of Back-Extracting Copper from Loaded Lix54-100

Selective solvent extraction of copper and cobalt from ammonia leaching solution containing copper and cobalt using Lix973

High Flux Recovery of Copper(Ii) from Ammoniacal Solution with Stable Sandwich Supported Liquid Membrane

A New Copper Extractant and Its Extraction Performances in Sulfate Medium

Interfacial emulsion formation originated from organic phase in copper solvent extraction

Solvent Extraction of Copper from Ammoniacal Chloride Solutions by Sterically Hindered Β-Diketone Extractants

Extraction of copper and ammonia from Cu2+-NH3-Cl--H2O system with mixture of LIX84 and TBP

Solvent Extraction of Copper and Zinc from Bioleaching Solutions with LIX984 and D2EHPA

Removal of Copper from Nickel Anode Electrolyte Through Ion Exchange