Abstract:The pre-peak microstructure evolution of the material is crucial in determining the strength and failure scheme of the material, but is not captured by the existing shear strength parameters models which focus on post-peak stage information. Novel concepts of pseudo-cohesion and pseudo-internal friction angle that account for both the pre-peak and post-peak stage information were proposed in this study, based on the experimentally observed response of the rock mechanics parameters to an external load (the maximum principal stress). These two parameters were analytically derived as functions of maximum principal strain, with coefficients to be determined (i.e., by applying the Mohr–Coulomb criterion with these parameters to experimental data). The dependence of pseudo-cohesion and pseudo-internal friction angle on the axial strain and confining pressure was investigated. The evolution of the strength parameters was found to relate to the propagation of micro-crack developed in the loading process, as revealed by PFC 2D simulations reproducing experiments. The results show that (1) analytical model characterizing the pseudo-cohesion and internal friction angle as the quadratic function of axial strain accurately reflects the mechanical response characteristics of the specimen; (2) before the residual stage, the pseudo-cohesion first increases and then decreases with increasing strain, while the pseudo-internal friction angle increases continuously; (3) for the sandstone specimens studied, the pseudo-cohesion at the peak stress increases by a gradually decreasing rate with increasing confining pressure, while the pseudo-internal friction angle at the peak stress decreases by a decreasing rate with the increasing confining pressure; (4) CPM well characterized the mechanical properties of rock under multiple confining pressures, as the total stress–strain curves and failure modes of numerical specimens reproduced the experimental results. The evolution of rock pseudo-shear strength parameters is closely related to the external load and the generation, propagation, and penetration process of rock cracks. The rock pseudo-shear strength parameters are gradually mobilized with the increasing load, and the propagating of cracks owing to the decrease of mobilizable maximum cohesion and the increase of mobilizable maximum internal friction angle.

Modified KCC model for modelling mechanical behaviour of quartz sandstone under triaxial compression from low to high confining pressures

Preliminary Study of Two-Scale Model for Analyzing Brittle Rock Based on Asymptotic Expansion Method

Investigation of compressive and tensile behaviors for porous sandstone by a microstructure-based constitutive model

Numerical modelling of sandstone uniaxial compression test using a mix-mode cohesive fracture model

A coupled elasto-plastic damage model for fine-grained sandstone under triaxial compression and lateral extension loading conditions

Experimental investigation and micromechanical modeling of the brittle-ductile transition behaviors in low-porosity sandstone

Experimental and numerical investigations on the mechanical behavior of sandstone subjected to gas undrained triaxial compression

3D continuum-discrete coupled modelling of triaxial Hopkinson bar tests on rock under multiaxial static-dynamic loads

A Study on the Mechanical Behavior and Statistical Damage Constitutive Model of Mudstone under Low Confining Pressure

Strain-softening model for granite and sandstone based on experimental and discrete element methods

Numerical and Experimental Assessment of the Sandstone Fracture Mechanism by Non-uniform Bonded Particle Modeling

Mesoscale Modelling of Concretes Subjected to Triaxial Loadings: Mechanical Properties and Fracture Behaviour

An Expanded Wing Crack Model for Fracture and Mechanical Behavior of Sandstone Under Triaxial Compression

A Three-Dimensional Discrete Element Model of Triaxial Tests Based on a New Flexible Membrane Boundary

An experimental investigation and mechanical modeling of the combined action of confining stress and plastic strain in a rock mass

Experimental Investigation and Micromechanical Modeling of Elastoplastic Damage Behavior of Sandstone

A novel obtaining method and mesoscopic mechanism of pseudo-shear strength parameter evolution of sandstone

Experimental and model investigation on hydro-mechanical behaviour of sandy mudstone

Effect of confining pressure on the compression-shear fracture properties of sandstone

An error-correction analysis of scaled model for mode-I fracture toughness of sandstone under impact load

Brittleness evaluation and damage evolution of sandstone under hydromechanical coupling