Abstract:Objective: The treatment for posterolateral tibial plateau fractures (PTPF) have been subjects of controversy. We conducted a study to improve the fixation of PTPF through a lateral approach. Methods: We utilized 40 synthetic tibias and categorized the fracture models into five groups based on the locking compression plate (LCP) and T-distal radius plate (TPP) via various forms of fixation with screws through the posterolateral (PL) fracture fragments. I: Two-screw fixation using two locking screws (LPTL). II: Two-screw fixation with both variable angle locking screws (LPTV). III: One-screw fixation with one locking screw (LPOL). IV: One-screw fixation with one locking screw and two anteroposterior lag screws (LPOLTL). V: a distal radius plate with three locking screws (TPP). Biomechanical tests were conducted to observe the axial compression displacement of the PL fracture fragments at force levels of 250 N, 500 N, and 750 N, as well as to determine the failure load and the axial stiffness for each respective group. Results: Under a 750 N load condition, the displacements within the five experimental groups exhibited the following trend: V < II < I< IV < III. However, there were no significant differences between Group V and Group II, Group I and Group IV ( p > 0.05), and only Group III demonstrated a displacement exceeding 3 mm. The failure load and the axial stiffness exhibited the same trend. Conversely, statistical significance was identified among the remaining group compared with Group III ( p < 0.05). Regarding the finite element analysis, the maximum displacements for the five models under the load of 750 N exhibited the following trend: V < II < I< IV < III. The following trends were observed in maximum von Mises stresses for these models under the load of 750 N: V < II < IV< I < III. Conclusion: It is crucial to address the inadequate mechanical strength associated with single screw fixation of LCP for fixing PL fractures in a clinical setting. The biomechanical strength of two-screw fixation surpasses that of single-screw fixation. Introducing variable-angle screws can further enhance the fixation range. Furthermore, the addition of two lag screws threaded from anterior to posterior can compensate the mechanical stability, when PL fracture is fixed with single screw in clinic.

Tibial Tuberosity Transposition Fixation with a Locking Plate during Medial Patellar Luxation Surgery: An Ex Vivo Mechanical Study

Effects of the Direction of Two Kirschner Wires on Combined Tibial Plateau Leveling Osteotomy and Tibial Tuberosity Transposition in Miniature Breed Dogs: An Ex Vivo Study

Comparative study of locking neutralization plate construct versus tension band wiring with a cannulated screw for patella fractures: experimental and finite element analysis

Biomechanical evaluation of a novel transtibial posterior cruciate ligament reconstruction using high-strength sutures in a porcine bone model

Anterior variable angle locking neutralisation plate superiority over traditional tension band wiring for treating transverse patella fractures

Study on Biomechanical Tests of 4 Internal Fixation Techniques for Patellar Fracture

A Biomechanical Study of an Alternative Internal Fixation Method for Transverse Patella Fractures

Biomechanical superiority of locking plate designed with cluster of head screws compared to conventional buttress plate for fixation of posteromedial tibial plateau fractures: A computational assessment

Biomechanical analysis of operative methods in the treatment of extra-articular fracture of the proximal tibia

[Biomechanics Test of Fixation of Star-Shaped Six-Part Patellar Fractures with Petal-Shaped Poly-Axial Locking Plate].

Biomechanics and finite element analysis comparing posterior T-plates with LCP for fixation of posterolateral tibial plate fractures

A Locking Plate Designed With Cluster of Head Screws Would Be Biomechanically Superior Than Conventional Buttress Plate For The Fixation of Posteromedial Tibial Plateau Fractures: A Computational Assessment

Biomechanical comparison of bone staple techniques for stabilizing tibial tuberosity fractures

Fatigue Failure in Extra-Articular Proximal Tibia Fractures: Locking Intramedullary Nail Versus Double Locking Plates-A Biomechanical Study

Intramedullary stabilization of extraarticular proximal tibial fractures: a biomechanical comparison of intramedullary and extramedullary implants including a new proximal tibia nail (PTN)

A Biomechanical Evaluation of Different Fixation Strategies for Posterolateral Fragments in Tibial Plateau Fractures and Introduction of the 'magic Screw'

Biomechanical Evaluation of Transverse Patella Fracture Fixation Using Headless Screws: A Comparison of Suture Versus Cable as a Tension Band

Posteromedial Tibial Plateau Split Fractures: a Biomechanical Study

Biomechanical study of loop plate combined with patellar claw in the treatment of comminuted fracture of inferior pole of patella

Biomechanical analysis of posteromedial tibial plateau split fracture fixation.

Comparative experimental study of the biomechanical properties of retrograde tibial nailing and distal tibia plate in distal tibia fracture