Abstract:Digital nucleic acid amplification provides unprecedented opportunities for absolute nucleic acid quantification by counting of single molecules. This technique is useful for molecular genetic analysis in cancer, stem cell, bacterial, non-invasive prenatal diagnosis in which many biologists are interested. This paper describes a self-priming compartmentalization (SPC) microfluidic chip platform for performing digital loop-mediated amplification (LAMP). The energy for the pumping is pre-stored in the degassed bulk PDMS by exploiting the high gas solubility of PDMS; therefore, no additional structures other than channels and reservoirs are required. The sample and oil are sequentially sucked into the channels, and the pressure difference of gas dissolved in PDMS allows sample self-compartmentalization without the need for further chip manipulation such as with pneumatic microvalves and control systems, and so on. The SPC digital LAMP chip can be used like a 384-well plate, so, the world-to-chip fluidic interconnections are avoided. The microfluidic chip contains 4 separate panels, each panel contains 1200 independent 6 nL chambers and can be used to detect 4 samples simultaneously. Digital LAMP on the microfluidic chip was tested quantitatively by using beta-actin DNA from humans. The self-priming compartmentalization behavior is roughly predictable using a two-dimensional model. The uniformity of compartmentalization was analyzed by fluorescent intensity and fraction of volume. The results showed that the feasibility and flexibility of the microfluidic chip platform for amplifying single nucleic acid molecules in different chambers made by diluting and distributing sample solutions. The SPC chip has the potential to meet the requirements of a general laboratory: power-free, valve-free, operating at isothermal temperature, inexpensive, sensitive, economizing labour time and reagents. The disposable analytical devices with appropriate air-tight packaging should be useful for point-of-care, and enabling it to become one of the common tools for biology research, especially, in point-of-care testing.

A Novel Pressure Indicator for Continuous Flow PCR Chip Using Micro Molded PDMS Pillar Arrays

Propidium Monoazide Pretreatment on a 3D-Printed Microfluidic Device for Efficient PCR Determination of ‘liveversusdead’ Microbial Cells

Constant Pressure-Regulated Microdroplet Polymerase Chain Reaction in Microfluid Chips: A Methodological Study

Microdroplet PCR in Microfluidic Chip Based on Constant Pressure Regulation

Digital PCR on an integrated self-priming compartmentalization chip

Droplet Based Micro Oscillating Flow-Through PCR Chip

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Bubble-free on-chip continuous-flow polymerase chain reaction: concept and application

A nanoliter self-priming compartmentalization chip for point-of-care digital PCR analysis

A Multi-Volume Microfluidic Device with No Reagent Loss for Low-Cost Digital PCR Application

High filling rate digital PCR through-hole array chip with double independent S-shaped flow channels

A Self-Priming Microfluidic Chip with Cushion Chambers for Easy Digital PCR

The effect of the surface passivation on polymerase chain reaction inside a continuous flow microfluidic chip

A self-digitization chip integrated with hydration layer for low-cost and robust digital PCR

Droplet-based Micro Oscillating-Flow PCR Chip

Polymerase Chain Reaction Chip with Microchannel of Glass Capillaries Embedded

Microfluidic PCR Chips

Self-Priming Compartmentalization Digital Lamp For Point-Of-Care

Kinetic Characteristics of Continuous Flow Polymerase Chain Reaction Chip: A Numerical Investigation

A Silicon-Based PDMS-PEG Copolymer Microfluidic Chip for Real-Time Polymerase Chain Reaction Diagnosis

Microfluidic chip fabrication and performance analysis of 3D printed material for use in microfluidic nucleic acid amplification applications