Abstract:Traditional light sources were required to provide stable and uniform illumination for a living or working environment considering performance of visual function of human being. The requirement was always reasonable until non-visual functions of the ganglion cells in the retina photosensitive layer were found. New generation of lighting technology, however, is emerging based on novel lighting materials such as LED and photobiological effects on human physiology and behavior.To realize dynamic lighting of LED whose intensity and color were adjustable to the need of photobiological effects, a quantitative dimming method based on Pulse Width Modulation (PWM) and light-mixing technology was presented. Beginning with two channels' PWM, this paper demonstrated the determinacy and limitation of PWM dimming for realizing Expected Photometric and Colorimetric Quantities (EPCQ), in accordance with the analysis on geometrical, photometric, colorimetric and electrodynamic constraints. A quantitative model which mapped the EPCQ into duty cycles was finally established. The deduced model suggested that the determinacy was a unique individuality only for two channels' and three channels' PWM, but the limitation was an inevitable commonness for multiple channels'. To examine the model, a light-mixing experiment with two kinds of white LED simulated variations of illuminance and Correlation Color Temperature (CCT) from dawn to midday. Mean deviations between theoretical values and measured values were obtained, which were 15lx and 23K respectively. Result shows that this method can effectively realize the light spectrum which has a specific requirement of EPCQ, and provides a theoretical basis and a practical way for dynamic lighting of LED.

Design of smart light source based on bi-color LED with single duty cycle for correlated color temperature adjustment

Design Of Led Dimming System With The Specific Target Parameter Control Function

Multi-primary human-centric lighting based on the optical power ratio and the CCT super-smooth switching algorithms

36.1: Development of CCT Tunable White LEDs for Circadian Lighting

Spectrum measurement for LED-based spectrum-tunable source

Tunable cold/warm white light emitting devices based on carbon dots with multiple emissive centers

Circadian-effect Engineering of Solid-State Lighting Spectra for Beneficial and Tunable Lighting.

Color Controllable Smart White Lighting Based on Various Device Architectures of Electrically Driven Quantum-Dot Light-Emitting Diodes

Tunable LED Lighting with Five Channels of RGCWW for High Circadian and Visual Performances

A Quantitative Dimming Method for LED Based on PWM

A Color Temperature Tunable LED Lighting Controller Based on DALI Protocol

Low blue light hazard for tunable white light emitting diode with high color fidelity and circadian performances

Wavelength Dependence of Colorimetric Properties of Lighting Sources Based on Multi-Color LEDs

Optical design for uniform color mixing illumination system

Uniform illumination design by configuration of LEDs and optimization of LED lens for large-scale color-mixing applications.

Photometric Optimization of Color Temperature Tunable Quantum Dots Converted White LEDs for Excellent Color Rendition

DESIGN OF A SELF-ADAPTED LED DESK LAMP BASED ON TCS3414CS

The Design of A Self-Adaptive Illuminance and Color Temperature Adjustable LED Desk Lamp

Change of Circadian Effect with Colour Temperature and Eye Spectral Transmittance at Different Ages

An LED Color Control System with Independently Changeable Illuminance

Spectrally Tunable LED Lighting System and Its Optimization Algorithm