Abstract:Identification of the heteroatom (nitrogen, sulfur, and oxygen)-containing compounds of petroleum is of key importance when considering industrial and environmental issues associated with crude oil production. The more commonly performed methods of crude oil fractionation are often insufficient in the extent to which they separate oils, not allowing defined "molecular" fractions to be obtained. Methods capable of performing a class type separation are uncommon and are often extensive and resource and time intensive. Here we report a method for the separation of crude oils into discrete compound classes. The method utilizes both ion exchange and normal phase chromatography to generate fractions of saturated hydrocarbons, aromatic hydrocarbons, basic compounds, naphthenic acids, and other oxygen-containing species, carbazoles, sulfones, and thiophenes from small crude oil samples (∼0.5 g). Assessment of method selectivity with a suite of model compounds has shown the fractions to be well-defined, with classes of model compounds isolated within discrete fractions. Application of the method to five crude oils of varying API gravity (12.1-38.3°) demonstrates a potential for wide-ranging use. Sample recoveries were high (77-98%) with simple evaporative losses correlating closely with total sample loss. Repeatability was also high, demonstrated by triplicate analyses of model compound mixtures, oils spiked with model compounds and oils alone. Separation selectivity was further demonstrated by application of the scheme to the Alaska North Slope (ANS) crude oil and analysis of fractions by comprehensive two-dimensional gas-chromatography mass-spectrometry (GC × GC/MS) and/or liquid-chromatography high-resolution accurate-mass mass-spectrometry methods (LC-HRAM-MS). Isolation of discrete fractions then allowed excellent separation (by LC and GC methods) of carbazole, dibenzothiophene, fluorenones, xanthones, and quinoline fractions. Individual parent and C1-5 alkyl homologues were easily separated (GC × GC/MS), allowing high-quality mass spectra (EI) to be obtained for the individual compounds in many cases. Analysis of fractions by GC × GC/MS also allowed a series of thioxanones to be identified.

Production of n-Paraffins by UOP Molex Process

Remarkable Separation of C5 Olefins in Anion-Pillared Hybrid Porous Materials

One-step Removal of Alkynes and Propadiene from Cracking Gases Using a Multi-Functional Molecular Separator

Geometry Control of Adsorption Sites in Sulfonate-Pillared Hybrid Ultramicroporous Materials for Efficient C4 Olefin Separations

Aqueous-Phase Processing on Multi-Functional Compounds over Platinum–Rhenium Supported on Carbon

Process for the production of paraxylene at high purity from a xylene cutting method using a separation unit in simulated moving bed and two isomerization units, one in the gas phase in another liquid phase.

Ultramicroporous material based parallel and extended paraffin nano-trap for benchmark olefin purification

Appraising separation performance of MOF-808-based adsorbents for light olefins and paraffins

Immobilization of Lewis Basic Sites into a Stable Ethane-Selective MOF Enabling One-Step Separation of Ethylene from a Ternary Mixture

Surface Sieving Carbon Skins for Propylene and Propane Separation

Desorbent swing adsorption process using ethylene to separate propane and propylene under isobaric conditions

Efficient propyne/propadiene separation by microporous crystalline physiadsorbents

Plant Design for the Production of Propylene Oxide by Isopropylbenzene 2-phenylpropane, or (1-Methylethyl) Benzene (Cumene)

Recovery of Paraffin from the Filter Cake Used for Paraffin Decoloration in the Fischer-Tropsch Synthetic Process

Recent Progress in a Membrane-Based Technique for Propylene/Propane Separation

Clean utilization of olefins in FT synthetic oil: Adsorption separation of C8 α-olefin/paraffin by simulated moving bed

Class Type Separation of the Polar and Apolar Components of Petroleum

Separation and Purification of Hydrocarbons with Porous Materials

Theoretical investigation of the paring mechanism of the MTO process in different zeolites

Efficient separation of C4 olefins with fluorinated anion-pillared hybrid ultramicroporous materials by gate-opening and size-sieving effect

Processes Using Zeolites in Petroleum Industries