Abstract:In current COD measurement method, we found that sodium chlorate (NaClO3) can effectively reduce the chemical oxygen demand (COD) of minerals processing wastewater (MPW). However, the reduction in COD via the present COD method was only achieved through the interference of NaClO3 with COD measurement. A series of laboratory-scale experiments demonstrated that the COD reduction is independent of NaClO3 reaction time, reaction pH and reaction temperature, but only related to NaClO3 dosage, and a higher NaClO3 dosage leads to a lower COD. Results further showed that the addition of NaClO3 didn’t affect the initial concentration of the total organic carbon, chloride ions and the benzohydroxamic acid (BHA); their concentration remained unchanged after the addition of NaClO3. Moreover, the residual concentration of NaClO3 also remained same as the initial value. However, COD in both MPW and BHA solution decreased. Furthermore, when added reducing agent to consume the residual NaClO3 before COD measurement, and then the COD was determined to return to its initial value. All these observations clearly shown that NaClO3 doesn’t react with the reducing substances in wastewater under the experimental conditions; it only reacts with reducing substances under the COD measurement conditions. From all these evidences, we concluded that NaClO3 can interfere with the determination of COD. In fact, the interference of NaClO3 is not specified in the standard method, which is a defect of the present COD measurement method. Residual NaClO3 remains in wastewater may cause secondary pollution to the environment. This study, therefore, suggest the government revise and improve the COD measurement method in order to avoid the interference of NaClO3 and prevent the industrial use of NaClO3 for COD reduction of wastewater.

Study of influence factors on sodium hypochlorite disinfection of reclaimed water

Influence of Chlorination Conditions on Amount of Trihaloacetic Acids Formation

Research on treatment of ammonia nitrogen in electroplating wastewater by sodium hypochlorite and its ORP control mode

STUDIES ON RECLAIMED WATER DISINFECTION USING SODIUM HYPOCHLORITE,OZONE AND THEIR COMBINATION TECHNIQUES

Influence of chlorine disinfection on the concentration of assimilable organic carbon in reclaimed water

Static study on application of chlorine dioxide for disinfection of secondary water supply

Study on the mechanism and influencing factors of compound chlorine dioxide and its chlorate disinfection by-products

STUDY ON THE APPLICATION OF SODIUM HYPOCHLORITE FOR DISINFECTION OF SECONDARY WATER SUPPLY IN THE SOUTH OF CHINA

Influence and Resolution of Nitrite-Leaded Chlorine Decay in Reclaimed Water

Inactivation, reactivation and regrowth of indigenous bacteria in reclaimed water after chlorine disinfection of a municipal wastewater treatment plant.

Study on the treatment of sanitary water using chlorine dioxide

Effects of Chlorination/chlorine Dioxide Disinfection on Biofilm Bacterial Community and Corrosion Process in a Reclaimed Water Distribution System.

Decay Law and Influential Factors for Residual Chlorine in Reclaimed Water Network

APPLICATION OF SODIUM HYPOCHLORITE FOR DISINFECTION OF SECONDARY WATER SUPPLY

Effect of Residual Chlorine on the Interaction Between Bacterial Growth and Assimilable Organic Carbon and Biodegradable Organic Carbon in Reclaimed Water

Experiment of Booster Chlorination with Sodium Hypochlorite for Water Supply Distribution System in Southern China Area

Effect of disinfectant residual on the interaction between bacterial growth and assimilable organic carbon in a drinking water distribution system

Formation and control of disinfection byproducts and toxicity during reclaimed water chlorination: A review.

Coupling changes of disinfectant and bacteria induced by the water stagnation and disinfection strategy

Study on the influence and mechanism of sodium chlorate on COD reduction of minerals processing wastewater

Sodium hypochlorite disinfection on effluent of MBR in municipal wastewater treatment process