Abstract:This study explores the application of the half-bridge Inductor-Inductor-Capacitor (LLC) resonant converter in Light Emitting Diode (LED) lighting driver power supplies, with a specific focus on improving efficiency and dimming capabilities. The investigation begins with an analysis of the sliding mode control (SMC) method, utilizing a constant-current design with a fixed switching frequency (FWF). A novel fuzzy frequency-selective SMC dimming strategy is proposed to recognize the challenge of significant output voltage ripple during dimming under a FSF. To address the ripple issue during dimming, an electromagnetic filtering circuit is designed, and a zero-voltage turn-on Metal—Oxide—Semiconductor (MOS) tube is introduced, incorporating a synchronous rectification scheme to mitigate losses in the secondary-side rectification diode. The study comprehensively considers a current-mode self-driven method, specifically tailored to the LLC circuit’s different operating modes. The LLC resonant circuit, along with the subsequent synchronous rectification circuit, is meticulously designed for a 252 W LED driver power supply prototype. A closed-loop simulation circuit model is developed using PSIM software in experimental validation. The feasibility of SMC based on a FSF is affirmed through a comparative analysis of SMC signal waveforms, steady-state output current (OC) models, and resonant tank current waveforms. The investigation into the OC under various SMC conditions demonstrates the half-bridge LLC resonant converter’s ability to achieve stable output with minimal ripple. The designed LED lighting circuit is applied to indoor design, providing adjustable LED brightness and switch status at different power levels. Although obstacles slightly impact the communication quality of the circuit, it remains suitable for the majority of users’ needs.

Independently Controllable Dual-Output Half-Bridge Series Resonant Converter for LED Driver Application

A Single-Stage Primary Side Controlled Flyback LED Driver

A linear constant current LED driver without off-chip inductor and capacitor

Asymmetric Pwm Controlled Llcc Resonant Half Bridge Dual Outputs Led Driver

A Three Leg Asymmetrical Voltage Resonant Converter with Independent Dimming Control for Multiple Load LED Lighting Applications

A Dimmable and Power-Compensated AC Direct LED Driver with High Efficiency

Minimum Current Control for Under-Resonant Dual-Bridge-Series-Resonant Converter

Hybrid passive current sharing method for multi-channel SRC LED driver

Series–Parallel Autoregulated Charge-Balancing Rectifier for Multioutput Light-Emitting Diode Driver

Bridgeless Isolated AC LED Driver

High-Performance Light Emitting Diode Lighting Circuits and Their Interior Design Applications

A Soft-Switched Boost Converter Based LED Driver With Reduced Input Current Ripple

A Multi-Channel Dc/Dc LED Driver with Inductor-Less Series-Parallel Auto-Regulated Rectifier

A High Power Buck Derived Non-Isolated Ac/Dc Led Driver

Analysis and Design Considerations for A High Power Buck Derived Led Driver with Extended Output Voltage and Low Total Harmonic Distortion

A Capacitor-Isolated Led Driver with Inherent Current Balance Capability

High efficiency quasi-two-stage converter with current balancing for multi-channel LED drive based on AC bus

Source Current Ripple Reduction with Input Voltage Controlled LED Driver

A Novel Bipolar Series Ripple Compensation Method for Single-Stage High-Power LED Driver

Modified Zero-Voltage-switching Single-Stage LED Driver Based on Class E Converter with Constant Frequency Control Method

High Efficiency Hybrid Current Balancing Method for Multi-Channel LED Drive