Abstract:Organic–inorganic perovskite solar cells (PSCs), which have good environmental durability, are of great interest for practical applications. In this work, we show that a solution-processed MoOx layer acts as a buffer layer against high moisture stress to suppress defects in the perovskite and as a hole transport layer. The inversion of the photoinduced charge migration behaviors, that is, the electron preferentially moving toward the surface when MoOx is directly deposited onto the perovskite, is found to cause a significant loss in device functionality. The deposition of MoOx onto spiro-OMeTAD results in a lower photocurrent density–voltage (J–V) hysteresis behavior, a greatly enhanced electrical conductivity, and a significantly stabilized power conversion efficiency (PCE) when compared with those of devices without the MoOx layer. More importantly, the PCEs of the MoOx-based devices are retained at over 85% of their initial value, while only 75% is retained for a reference cell. This work highlights the facial fabrication approach of the solution-based MoOx layer and provides experimental evidence of the photogenerated charge migration behaviors on the perovskite/MoOx interface. This information would be beneficial for the further design and development of PSC technology.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c02963?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c02963</a>.XRD data of MoOx with annealing treatment at 150 and 425 °C and perovskite after exposure to moisture for various periods; magnified XRD signals of fresh perovskite and MoOx/perovskite as a function of the grazing angle; top-view SEM images of the perovskite capped with MoOx at various MoOx concentrations and of 0.02 M MoOx prepared on the spiro/perovskite/SnO2 sample; cross-sectional SEM image of the MoOx/perovskite layer and AFM film thickness of 0.02 M MoOx coated on the glass slide; determination of an optical band gap (Eg) and Urbach tail energy (Eu) of the perovskite deposited with MoOx; steady-state PL spectra of the spiro/perovskite sample having MoOx and SnO2 with different MoOx concentrations; XPS spectra of Mo 3d and O 1s of 0.02 M MoOx/perovskite after exposure to 1 sun for different periods; device parameters: short-circuit current (Jsc), open-circuit potential (Voc), and FF of the device with and without MoOx as a function of aging time; and J–V curves of the device consisting of Ag/spiro-OMeTAD/MoOx/perovskite/SnO2/FTO-coated glass (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c02963/suppl_file/ae0c02963_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Inhibition of iodide ion migration in flexible perovskite solar cells using oxide–metal–oxide transparent electrode

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Ion-Migration Inhibitor for Spiro-OMeTAD/Perovskite Contact Toward Stable Perovskite Solar Cells

Preparation of flexible organic solar cells with highly conductive and transparent metal-oxide multilayer electrodes based on silver oxide

Improvement of transparent silver thin film anodes for organic solar cells with a decreased percolation threshold of silver

Triarylphosphine Oxide as Cathode Interfacial Material for Inverted Perovskite Solar Cells

Transparent Ultrathin Oxygen‐Doped Silver Electrodes for Flexible Organic Solar Cells

Improved photovoltaic performance and stability of perovskite solar cells by adoption of an n-type zwitterionic cathode interlayer

Optimization of oxide materials in oxide-metal-oxide(OMO) electrodes for flexible electrochromic devices

Physically and Chemically Stable Molybdenum-Based Composite Electrodes for P-I-n Perovskite Solar Cells

Efficient Inverted Ito-Free Organic Solar Cells Based On Transparent Silver Electrode With Aqueous Solution-Processed Zno Interlayer

High-Quality PEI/Ag/PEI-Zn Semitransparent Electrode for Efficient ITO-Free Flexible Organic Solar Cells and Perovskite Solar Cells

Suppression of Ag Migration by Low-Temperature Sol-Gel Zinc Oxide in the Ag Nanowires Transparent Electrode-Based Flexible Perovskite Solar Cells

Impact of a Spun-Cast MoO x Layer on the Enhanced Moisture Stability and Performance-Limiting Behaviors of Perovskite Solar Cells

Over 19% Efficiency Perovskite Solar Modules by Simultaneously Suppressing Cation Deprotonation and Iodide Oxidation.

Naphthalene Diimide-Modified SnO2 Enabling Low-Temperature Processing for Efficient ITO-Free Flexible Perovskite Solar Cells

Multifunctional Anti‐Corrosive Interface Modification for Inverted Perovskite Solar Cells

Ito-Free Semitransparent Organic Solar Cells Based on Silver Thin Film Electrodes

Influence of Perfluorinated Ionomer in PEDOT:PSS on the Rectification and Degradation of Organic Photovoltaic Cells

Exploiting an Interfacial Reaction in Perovskite Solar Cells: Quaternary Alkylammonium Ionic Salt Dopants for Spiro‐OMeTAD