Abstract:This work proposes a simulation-based multi objective optimization model for the operation of the product separation process in a methanol to propylene (MTP) plant, striving to enhance the system energy utilization efficiency. The formation of byproducts including an oxygenated hydrocarbon, dimethyl ether (DME), makes the product refining process highly energy-intensive, not only because that the various hydrocarbon byproducts require a long train of distillation columns but also owing to the fact that DME forms azeotrope with product propylene. Furthermore, the formation of oxygenated DME byproduct varies with the catalyst activity, which makes the system more complex. The contribution of this paper is 2-fold. First, it proposes a novel way of DME removal with responsive consumption of extractant methanol according to the DME concentration during one production period. In this way, the energy consumption of the condenser and reboiler of the methanol recovery unit can be expected to decrease by 61.5% and 37.6%, respectively. Second, a simulation-based multiobjective optimizaton framework is introduced to minimize the total heating and cooling costs and maximize the product purity, by integrating a rigorous process simulation model with an intelligent optimization algorithm. Given the characteristics of the MTP production process, three different operation scenarios, namely, the start of run, the designed operation condition, and the end of run, which correspond to different DME concentrations in the system, are covered. The approach is illustrated by its application to a real MTP plant, in which numerical results indicate that the proposed method is capable of identifying appealing operation options, and it can be utilized to support decision-making of the product separation of MTP plants.

Simulation and optimization of Mono Ethylene Glycol production process

Simulation and Optimization of Linear Alkylbenzenes Distillation Process

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation and Optimization of Distillation Column Sequence in Large-Scale Ethylene Production

Process Simulation, Thermodynamic and System Optimization for the Low-Carbon Alcohols Production Via Gasification of Second-Generation Biomass

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Systematic Optimization Methodology for Simultaneous Process Design and Heat Exchanger Network Synthesis with Surrogate Models – Application to Distillation Column Complex

Dynamic simulation and optimization of ethylene glycol desorption and resorption process

Plant-Wide Modeling and Economic Analysis of Monoethylene Glycol Production

Simulation of ethylene glycol process based on integrated modeling method

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Simulation of the Reactor for Dimethyl Oxalate Hydrogenation to Ethylene Glycol

Simulation-Based Superstructure Optimization for the Synthesis Process of Aromatics Production from Methanol

Simulation of Continuous Esterification Process of Polyester Polyols

Simulation and optimization of product separation process for a 520 kt/a methanol-to propylene (MTP) plant

Multi-objective particle swarm optimization of industrial natural gas dehydration process

Simulation and multi-objective optimization of the dimethyl carbonate production process

Conceptualization and process simulation of a CO2 based methanol production plant

Optimization of the Oxidative Coupling of Methane Process for Ethylene Production

Process simulation and optimization of energy-saving and environment-friendly methanol distillation device