Abstract:In recent decades, numerous studies have indicated the substantial role semiconductors could play in photocatalytic processes for environmental applications. Materials that contain a semiconductor as a photocatalyst have a semi-permanent capacity for removing harmful gases from the ambient air. In this paper, the focus is on TiO2. Heterogeneous photocatalysis using TiO2 leads to the degradation of NO/NO2, benzene, toluene, and other priority air pollutants once in contact with the semiconductor surface. Preliminary evidence indicates that TiO2-containing construction materials and paints efficiently destroy the ozone precursors NO and NO2 by up to 80% and 30%, respectively. Therefore, the development of innovative coatings containing TiO2 as a photocatalyst was in the foreground of research activities. The aim of this was for coatings to be used as building and construction materials, mainly outdoors, e.g., on building façades on high-traffic roads for the degradation of priority air pollutants (NOx and volatile organic compounds) in the polluted urban atmosphere. Though there are advantages connected with the application of TiO2, due to its band gap of 3.2 eV, these are limited. TiO2 is effective only in the UV region (ca. 5%) of the solar spectrum with wavelengths λ < 380 nm. Hence, efforts are made here, as in many research studies, to dope TiO2 with transition metals to increase its activity using visible light, which will extend its application to indoor environments. In our studies, experiments were conducted with 0.1% (w/w) and 1% (w/w) Mn-TiO2 admixtures, and the ability of the modified photocatalysts to degrade NO by both solar and indoor illumination was evaluated. The surface chemistry at the air/catalyst interface, governed by the photoelectric characteristics of TiO2 and the formation of reactive oxygen species with co-occurring redox reactions, is reviewed in this paper. The factors affecting the application of TiO2 for the degradation of priority air pollutants as single compounds or mixtures are discussed. We investigated, particularly, the degradation of mixtures of priority compounds at typical concentrations in ambient air and confined spaces. This is a realistic approach, because pollutants are present as mixtures, rather than as individual compounds in ambient and indoor air. Moreover, organic polymers as paint constituents were found to be the primary source for carbonyl formation, e.g., formaldehyde, acetaldehyde, etc., during the heterogeneous photocatalytic processes conducted on TiO2-enriched coatings.

Impact of photocatalytic remediation of pollutants on urban air quality

Photocatalytic Degradation of Organic and Inorganic Pollutants to Harmless End Products: Assessment of Practical Application Potential for Water and Air Cleaning

The Photocatalytic Degradation Of Indoor Air Contamiants Using Thin Film Tio2 Photocatalyst

Photo-Induced Degradation of Priority Air Pollutants on TiO2-Based Coatings in Indoor and Outdoor Environments—A Mechanistic View of the Processes at the Air/Catalyst Interface

Photocatalytic Abatement Results from a Model Street Canyon

Advanced photocatalytic oxidation processes for micropollutant elimination from municipal and industrial water

The Study of Photocatalytic Air Purifying Technology in Buildings

Advances and challenges of photocatalytic technology for air purification

Challenges in quantification of photocatalytic NO2 abatement effectiveness under real world exposure conditions illustrated by a case study

Developing Novel Photocatalytic Cementitious Permeable Pavements for Depollution of Contaminants and Impurities in Urban Cities

TiO 2 -based photocatalysts for emerging gaseous pollutants removal: From photocatalysts to reactors design

Photocatalyst efficiencies in concrete technology: The effect of photocatalyst placement

Photocatalytic degradation of air contaminants using TiO2 film in a reticulated photocatalytic reactor

Photocatalytic Reactor as a Bridge to Link the Commercialization of Photocatalyst in Water and Air Purification

Photocatalytic oxidation technology for indoor environment air purification: The state-of-the-art

Field Evaluation of Ability of Photocatalytic Concrete Pavements to Remove Nitrogen Oxides

Bed Flow Photoreactor Experiments to Assess the Photocatalytic Nitrogen Oxides Abatement under Simulated Atmospheric Conditions

Photocatalytic concrete for NOx abatement: Supported TiO2 efficiencies and impacts

Research Advances in Photocatalytic Detoxification Technology for Air Purification

"Environmental Catalytic City": Concept and Research Prospects

Design and mechanism of photocatalytic oxidation for the removal of air pollutants: a review