Abstract:The valorization of agricultural by-products represents a promising approach to sustainable development. In the transition toward a circular economy, Opuntia ficus indica peels (OFIP) can be converted into valuable products, thereby reducing greenhouse gas emissions and contributing to climate change mitigation. This study proposes the valorization of OFIP residues through pyrolysis, focusing on biochar production. The main objective of the present study is to optimize OFIP pyrolysis, considering both slow- and fast-pyrolysis processes at temperatures ranging from 500 to 700°C. Therefore, two different pyrolysis technologies were applied: fixed bed and spouted bed reactors for slow and fast pyrolysis, respectively. The novel approach of the study lies in employing the same biomass feedstock in two different pyrolysis technologies, enabling a direct comparison of the effects of these pyrolysis approaches on biochar production. Moreover, the resulting biochars underwent comprehensive characterization by elemental, proximate, chemical composition, and thermogravimetric (TG) analysis, X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), CO 2 adsorption, and scanning electron microscopy (SEM). Additionally, the potential of the obtained biochar for subsequent valorization was evaluated, and the most suitable biochar for a specific application was determined based on its properties. The obtained results revealed that slow pyrolysis of OFIP yielded slightly higher biochar amounts than fast pyrolysis, with the highest biochar production at 500°C. Regarding biochar characterization, fast pyrolysis samples had higher fixed carbon and ash contents than the ones produced from slow pyrolysis. Moreover, fast-pyrolysis biochars showed a more developed porous structure, attaining a specific surface area of 328.61 m 2 g −1 and a micropore volume of 0.13 cm 3 g −1 at 700°C. This study concluded that fast-pyrolysis biochars may be suitable for catalytic applications, whereas slow-pyrolysis biochars may be more appropriate for adsorption and soil applications. Nevertheless, the high ash content of the OFIP-derived biochar makes it unsuitable to be used for power generation.

From woody biomass waste to biocoke: influence of the proportion of different tree components

Synergistic recycling of biochar from sawdust pyrolysis and waste coke breeze to produce metallurgical quality biocoke with syngas as a by-product

Optimization of Charcoal Production Process from Woody Biomass Waste: Effect of Ni-Containing Catalysts on Pyrolysis Vapors

Experimental and modeling investigation on pyrolysis of agricultural biomass residues: Khat stem and coffee husk for bio-oil application

Characteristics of Biochar Obtained by Pyrolysis of Residual Forest Biomass at Different Process Scales

Utilization of Charcoal Obtained from Woody Biomass in Metallurgical Processes Based on Solid–Gas Reactions

Experimental analysis and numerical simulation of biomass pyrolysis

Modified Biochar Materials From Eucalyptus globulus Wood as Efficient CO2 Adsorbents and Recyclable Catalysts

Value-Added Bio-carbon Production through the Slow Pyrolysis of Waste Bio-oil: Fundamental Studies on Their Structure–Property–Processing Co-relation

Impact of pyrolysis process conditions on the features of the biochar from Opuntia ficus indica fruit peels

Effect of Ni/Al2O3 mixing on the coking behavior of bio-oil during its pyrolysis: Further understanding based on the interaction between its components

Co‐Pyrolysis of a Binary Blend of Solid Biowastes in a Fixed‐Bed Reactor for Bio‐Oil and Carbon Adsorbent Production

A Review of Intermediate Pyrolysis as a Technology of Biomass Conversion for Coproduction of Biooil and Adsorption Biochar

Properties of biochar derived from wood and high-nutrient biomasses with the aim of agronomic and environmental benefits

Production of Bio-Oils and Biochars from Olive Stones: Application of Biochars to the Esterification of Oleic Acid

Insights into the Product Quality and Energy Requirements for Solid Biofuel Production: A Comparison of Hydrothermal Carbonization, Pyrolysis and Torrefaction of Olive Tree Pruning

Enhancement of coal tar pitch carbonization with biochar: A metallurgical formed biocoke product produced by waste coke breeze and bamboo powder

Pre- and post-pyrolysis effects on iron impregnation of ultrasound pre-treated softwood biochar for potential catalysis applications

Production and characterization of biocarbon from woody biomasses produced at 1000 °C

Synergistic effects of the mixing factor on the kinetics and products obtained by co-pyrolysis of Rosa rubiginosa rosehip seed and husk wastes

Evaluating the blending potential of two different biomass via co-pyrolysis as sustainable pathway using RSM optimization for bioenergy and bio char production