Mechanized azobenzene-functionalized zirconium metal-organic framework for on-command cargo release

Xiangshi Meng,Bo Gui,Daqiang Yuan,Matthias Zeller,Cheng Wang

DOI: https://doi.org/10.1126/sciadv.1600480

IF: 13.6

2016-08-05

Science Advances

Abstract:A simple strategy to construct a stimuli-responsive mechanized zirconium metal-organic framework for on-command cargo release.

multidisciplinary sciences

What problem does this paper attempt to address?

Dual-Stimulus-Triggered Programmable Drug Release and Luminescent Ratiometric Ph Sensing from Chemically Stable Biocompatible Zinc Metal-Organic Framework.

Kai Xing,Ruiqing Fan,Fengyou Wang,Huan Nie,Xi Du,Shuang Gai,Ping Wang,Yulin Yang

DOI: https://doi.org/10.1021/acsami.8b06270

IF: 9.5

2018-01-01

ACS Applied Materials & Interfaces

Abstract:Metal-organic frameworks (MOFs), as drug delivery carriers, with high loading capacity and controllable release behavior can provide a more efficacious therapy in cancer treatments. In our work, a novel biocompatible zinc MOF Zn-cpon-1 with the (3,6)-connected rtl 3D topological network was designed and synthesized via employing ClO4- anion as template. The optically and chemically stable Zn-cpon-1 could be verified as a pH-responsive dual-emission platform and excellent drug delivery carrier with higher 5-fluorouracil (5-FU) (44.75 wt %) loading behavior than 6-mercaptopurine (6-MP) (4.79 wt %) ascribed to the influence of size and shape matching. The multiple interactions between Zn-cpon-1 and 5-FU drug molecules have been discussed and evidenced, which could be quantitatively estimated via the rate constant related to the topological structure. Specially, the gust release behavior of 5-FU@Zn-cpon-1 microcrystal was described and programmed via the Weibull distribution model and could be dual-triggered by the temperature and pH stimulus. This study illustrates that the Zn-cpon-1 without any postmodification performs a favorable potential of being used as biomedical drug delivery alternative carriers in effective drug payload, flexible release administration, and superior dual-stimuli responsiveness.
Controlled Zn2+-Triggered Drug Release by Preferred Coordination of Open Active Sites Within Functionalization Indium Metal Organic Frameworks.

Xi Du,Ruiqing Fan,Liangsheng Qiang,Kai Xing,Haoxin Ye,Xinya Ran,Yang Song,Ping Wang,Yulin Yang

DOI: https://doi.org/10.1021/acsami.7b09227

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:Drug delivery in target regions could make extraordinary progress in chemoselective therapies. A novel preferred coordination (PC) strategy referring to proactive interacting with open active sites to replace previous occupation by ion-exchange for controlling release of drug molecules is well-constructed. Two topological types of MOF-In1 (Schläfli symbol: (4,8)-connected of (410·615·83)(45·6)2) and MOF-In2 (Schläfli symbol: (4,4)-connected of (66)) show the specific way. Increasing node connectivity as well as the trapping of guest OH- anions, 5-fluorouracil (5-FU) is preferentially captured into the MOF-In1, which exhibits an outstanding loading capacity around 34.32 wt %. 19F NMR spectroscopy was further employed to investigate host-guest interaction and reveal the binding constant (Ka = 3.84 × 102 M-1). Meanwhile, the controlled release of 5-FU in a simulated human body with liquid phosphate-buffered saline solution by biofriendly Zn2+-triggered is realized. With an elevated Zn2+ concentration, the drug release will be enhanced. This efficient strategy for MOFs as multifunctional drug carrier opens a new avenue for biological and medical applications.
An Ultrastable Metal–Organic Framework with Open Coordinated Sites Realizing Selective Separation Toward Cationic Dyes in Aqueous Solution

Meng-Ke Wu,Fei-Yan Yi,Yuan Fang,Xun-Wen Xiao,Shi-Cheng Wang,Lu-Qing Pan,Shuai-Ru Zhu,Kai Tao,Lei Han

DOI: https://doi.org/10.1021/acs.cgd.7b00984

IF: 4.01

2017-01-01

Crystal Growth & Design

Abstract:A novel Zn-based metal organic framework (MOF) was synthesized from the mixed ligands, 3,3',5,5'-azoxybenzenetetracarboxylic acid (H(4)AOBTC) and 1,4-bis(1H-benzo[d]imidazol-1-yl)benzene (phenDIB) ligand. The crystal structure of the complex exhibits an interpenetrated three-dimensional framework that can be simplified as a (4,4)-connected 2-nodal bbf net. This MOF displays extraordinary thermostability in boiling water for 12 h and chemical stability in a wide pH range of 2-13. The most intriguing feature is that it can successfully separate cationic dyes from mixed dye molecules in aqueous solution with high effectivity and selectivity, even for rhodamine B molecule with a large size. Furthermore, this material is reusable, and the adsorbed dye molecules can be released and recovered completely. It is very important for the practical application from a view of environmental protection and resource recycling.
Pore Surface Engineering with Controlled Loadings of Functional Groups Via Click Chemistry in Highly Stable Metal-Organic Frameworks

Hai-Long Jiang,Dawei Feng,Tian-Fu Liu,Jian-Rong Li,Hong-Cai Zhou

DOI: https://doi.org/10.1021/ja3063919

IF: 15

2012-01-01

Journal of the American Chemical Society

Abstract:Reactions of ZrCl(4) and single or mixed linear dicarboxylic acids bearing methyl or azide groups lead to highly stable isoreticular metal-organic frameworks (MOFs) with content-tunable, accessible, reactive azide groups inside the large pores. These Zr-based MOFs offer an ideal platform for pore surface engineering by anchoring various functional groups with controlled loadings onto the pore walls via the click reaction, endowing the MOFs with tailor-made interfaces. Significantly, the framework and crystallinity of the functionalized MOFs are well-retained, and the engineered pore surfaces have been demonstrated to be readily accessible, thus providing more opportunities for powerful and broad applications of MOFs.
Systematic Engineering of Single Substitution in Zirconium Metal-Organic Frameworks Toward High-Performance Catalysis.

Ning Huang,Shuai Yuan,Hannah Drake,Xinyu Yang,Jiandong Pang,Junsheng Qin,Jialuo Li,Yingmu Zhang,Qi Wang,Donglin Jiang,Hong-Cai Zhou

DOI: https://doi.org/10.1021/jacs.7b09553

IF: 15

2017-01-01

Journal of the American Chemical Society

Abstract:Zirconium-based metal-organic frameworks (Zr-MOFs) exhibit great structural tunability and outstanding chemical stability, rendering them promising candidates for a wide range of practical applications. In this work, we synthesized a series of isostructural PCN-224 analogues functionalized by ethyl, bromo, chloro, and fluoro groups on the porphyrin unit, which allowed us to explicitly study the effects of electron-donating and electron-withdrawing substituents on catalytic performance in MOFs. Owing to the different electronic properties of ethyl, bromo, chloro, and fluoro substitutes, the molecular-level control over the chemical environment surrounding a catalytic center could be readily achieved in our MOFs. To investigate the effects of these substitutes on catalytic activity and selectivity, the oxidation of 3-methylpentane to corresponding alcohols and ketones was utilized as a model reaction. Within these five analogues of PCN-224, an extremely high turnover number of 7680 and turnover frequency of 10 240 h-1 was achieved by simply altering the substitutes on porphyrin rings. Moreover, a remarkable 99% selectivity of the tertiary alcohol over the five other possible by-products are realized. We demonstrate that this strategy can be used to efficiently screen a suitable peripheral environment around catalytic cores in MOFs for catalysis.
Creating Well-Defined Hexabenzocoronene In Zirconium Metal-Organic Framework By Postsynthetic Annulation

Jun-Sheng Qin,Shuai Yuan,Lei Zhang,Bao Li,Dong-Ying Du,Ning Huang,Wei Guan,Hannah F Drake,Jiandong Pang,Ya-Qian Lan,Ali Alsalme,Hong-Cai Zhou

DOI: https://doi.org/10.1021/jacs.8b11042

IF: 15

2019-01-01

Journal of the American Chemical Society

Abstract:The incorporation of large pi-conjugated ligands into metal-organic frameworks (MOFs) can introduce intriguing photophysical and electrochemical properties into the framework. However, these effects are often hindered by the strong pi-pi interaction and the low solubility of the arylated ligands. Herein, we report the synthesis of a porous zirconium-based MOF, Zr-6(mu(3)-O)(4)(mu(3)-OH)(4)(OH)(6)(H2O)(6)(HCHC) (PCN-136, HCHC = hexakis(4-carboxyphenyl)hexabenzocoronene), which is composed of a hexacarboxylate linker with a pi-conjugated hexabenzocoronene moiety. Direct assembly of the Zr4+ metal centers and the HCHC ligands was unsuccessful due to the low solubility and the unfavorable conformation of the arylated HCHC ligand. Therefore, PCN-136 was obtained from aromatization-driven postsynthetic annulation of the hexaphenylbenzene fragment in a preformed framework (pbz-MOF-1) to avoid pi-pi stacking. This postsynthetic modification was done through a single-crystal-to-single-crystal transformation and was clearly observable utilizing single-crystal X-ray crystallography. The formation of large pi-conjugated systems on the organic linker dramatically enhanced the photoresponsive properties of PCN-136. With isolated hexabenzocoronene moieties as photosensitizers and Zr-oxo clusters as catalytic sites, PCN-136 was employed as an inherent photocatalytic system for CO2 reduction under visible-light irradiation, which showed increased activity compared with pbz-MOF-1.
Strongly Lewis Acidic Metal-Organic Frameworks For Continuous Flow Catalysis

Pengfei Ji,Xuanyu Feng,Pau Oliveres,Zhe Li,Akiko Murakami,Cheng Wang,Wenbin Lin

DOI: https://doi.org/10.1021/jacs.9b07891

IF: 15

2019-01-01

Journal of the American Chemical Society

Abstract:The synthesis of highly acidic metal-organic frameworks (MOFs) has attracted significant research interest in recent years. We report here the design of a strongly Lewis acidic MOF, ZrOTf-BTC, through two-step transformation of MOF-808 (Zr-BTC) secondary building units (SBUs). Zr-BTC was first treated with 1 M hydrochloric acid solution to afford ZrOH-BTC by replacing each bridging formate group with a pair of hydroxide and water groups. The resultant ZrOH-BTC was further treated with trimethylsilyl triflate (Me3SiOTf) to afford ZrOTf-BTC by taking advantage of the oxophilicity of the Me3Si group. Electron paramagnetic resonance spectra of Zr-bound superoxide and fluorescence spectra of Zr-bound N-methylacridone provided a quantitative measurement of Lewis acidity of ZrOTf-BTC with an energy splitting (Delta E) of 0.99 eV between the pi(x)* and pi(y)* orbitals, which is competitive to the homogeneous benchmark Sc(OTf)(3). ZrOTf-BTC was shown to be a highly active solid Lewis acid catalyst for a broad range of important organic transformations under mild conditions, including Diels-Alder reaction, epoxide ring-opening reaction, Friedel-Crafts acylation, and alkene hydroalkoxylation reaction. The MOF catalyst outperformed Sc(OTf)(3) in terms of both catalytic activity and catalyst lifetime. Moreover, we developed a ZrOTf-BTC@SiO2 composite as an efficient solid Lewis acid catalyst for continuous flow catalysis. The Zr centers in ZrOTfBTC@SiO2 feature identical coordination environment to ZrOTf-BTC based on spectroscopic evidence. ZrOTf-BTC@SiO2 displayed exceptionally high turnover numbers (TONs) of 1700 for Diels-Alder reaction, 2700 for epoxide ring-opening reaction, and 326 for Friedel-Crafts acylation under flow conditions. We have thus created strongly Lewis acidic sites in MOFs via triflation and constructed the MOF@SiO2 composite for continuous flow catalysis of important organic transformations.
Tuning the Ionicity of Stable Metal–Organic Frameworks Through Ionic Linker Installation

Jiandong Pang,Shuai Yuan,Jun-Sheng Qin,Christina T. Lollar,Ning Huang,Jialuo Li,Qi Wang,Mingyan Wu,Daqiang Yuan,Maochun Hong,Hong-Cai Zhou

DOI: https://doi.org/10.1021/jacs.8b12530

IF: 15

2019-01-01

Journal of the American Chemical Society

Abstract:The predictable topologies and designable structures of metal-organic frameworks (MOFs) are the most important advantages for this emerging crystalline material compared to traditional porous materials. However, pore-environment engineering in MOF materials is still a huge challenge when it comes to the growing requirements of expanded applications. A useful method for the regulation of pore-environments, linker installation, has been developed and applied to a series of microporous MOFs. Herein, employing PCN-700 and PCN-608 as platforms, ionic linker installation was successfully implemented in both microporous and mesoporous Zr-based MOFs to afford a series of ionic frameworks. Selective ionic dye capture results support the ionic nature of these MOFs. The mesopores in PCN-608 are able to survive after installation of the ionic linkers, which is useful for ion exchange and further catalysis. To illustrate this, Ru(bpy)32+, a commonly used photoactive cation, was encapsulated into the anionic mesoporous PCN-608-SBDC via ion exchange. Photocatalytic activity of Ru(bpy)3@PCN-608-SBDC was examined by aza-Henry reactions, which show good catalytic performance over three catalytic cycles.
Ligand-Directed Conformational Control over Porphyrinic Zirconium Metal–Organic Frameworks for Size-Selective Catalysis

Liting Yang,Peiyu Cai,Liangliang Zhang,Xiaoyi Xu,Andrey A. Yakovenko,Qi Wang,Jiandong Pang,Shuai Yuan,Xiaodong Zou,Ning Huang,Zhehao Huang,Hong-Cai Zhou

DOI: https://doi.org/10.1021/jacs.1c03960

IF: 15

2021-08-02

Journal of the American Chemical Society

Abstract:Zirconium-based metal–organic frameworks (Zr-MOFs) have aroused enormous interest owing to their superior stability, flexible structures, and intriguing functions. Precise control over their crystalline structures, including topological structures, porosity, composition, and conformation, constitutes an important challenge to realize the tailor-made functionalization. In this work, we developed a new Zr-MOF (PCN-625) with a csq topological net, which is similar to that of the well-known PCN-222 and NU-1000. However, the significant difference lies in the conformation of porphyrin rings, which are vertical to the pore surfaces rather than in parallel. The resulting PCN-625 exhibits two types of one-dimensional channels with concrete diameters of 2.03 and 0.43 nm. Furthermore, the vertical porphyrins together with shrunken pore sizes could limit the accessibility of substrates to active centers in the framework. On the basis of the structural characteristics, PCN-625(Fe) can be utilized as an efficient heterogeneous catalyst for the size-selective [4 + 2] hetero-Diels–Alder cycloaddition reaction. Due to its high chemical stability, this catalyst can be repeatedly used over six times. This work demonstrates that Zr-MOFs can serve as tailor-made scaffolds with enhanced flexibility for target-oriented functions.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/jacs.1c03960.Detailed synthesis procedures, characterization data for new compounds, and materials (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary
Reticular Chemistry and In Situ "One‐Pot" Strategy: A Dream Combination to Construct Metal–Organic Frameworks

Pu‐Hao Fang,Kai Xing,Lu‐Lu Qu,Zhen‐Sha Ma,Kang Zhou,Xiao‐Yuan Liu

DOI: https://doi.org/10.1002/smll.202405540

IF: 13.3

2024-08-31

Small

Abstract:A series of tetra‐, hexa‐, and octa‐topic carboxylic acids‐based Zr‐MOFs are successfully constructed via the combination of reticular chemistry and in situ "one‐pot" strategy. Reticular chemistry guided structural analysis provides the molecular skeleton for target MOFs, then in situ "one‐pot" offers the approach to synthesizing these organic linkers and sequentially constructing MOFs with specific structures and properties. The establishment of reticular chemistry has significantly facilitated the development of porous materials, especially for metal–organic frameworks (MOFs). On the other hand, as an alternative approach, in situ "one‐pot" strategy has been explored as a promising approach to constructing MOFs, in which the synthesis of organic linkers and the sequential construction of MOFs are integrated into one solvothermal condition. This strategy can efficiently avoid the limitations faced in the traditional construction method, such as time‐consuming organic synthesis and multiple separation and purification. Herein, inspired by the reaction of aldehydes and o‐phenylenediamine and deep structural analysis of UiO‐68, a series of tetra‐, hexa‐, and octa‐topic carboxylic acids are synthesized using 2′,3′‐diamino‐[1,1′:4′,1′"‐terphenyl]‐4,4′"‐dicarboxylic acid and di‐, tri‐, and tetra‐topic aldehydes as precursor. Then nine multicarboxylate‐based zirconium MOFs (Zr‐MOFs) are successfully constructed via the combination of reticular chemistry and in situ "one‐pot" strategy. The resultant Zr‐MOFs can be regarded as the partial face decoration of UiO‐68. More importantly, the emission properties of resultant Zr‐MOFs can be well controlled using aldehydes with tunable electronic structures. This work provides a new path to rational design and construction of porous materials with specific structures guided by reticular chemistry and conducted using in situ "one‐pot" strategy.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Flexible Zirconium Metal‐Organic Frameworks As Bioinspired Switchable Catalysts

Shuai Yuan,Lanfang Zou,Haixia Li,Ying-Pin Chen,Junsheng Qin,Qiang Zhang,Weigang Lu,Michael B. Hall,Hong-Cai Zhou

DOI: https://doi.org/10.1002/anie.201604313

2016-01-01

Angewandte Chemie

Abstract:Flexible metal-organic frameworks (MOFs) are highly desirable in host-guest chemistry owing to their almost unlimited structural/functional diversities and stimuli-responsive pore architectures. Herein, we designed a flexible Zr-MOF system, namely PCN-700 series, for the realization of switchable catalysis in cycloaddition reactions of CO2 with epoxides. Their breathing behaviors were studied by successive single-crystal X-ray diffraction analyses. The breathing amplitudes of the PCN-700 series were modulated through pre-functionalization of organic linkers and post-synthetic linker installation. Experiments and molecular simulations confirm that the catalytic activities of the PCN-700 series can be switched on and off upon reversible structural transformation, which is reminiscent of sophisticated biological systems such as allosteric enzymes.
Reticular Chemistry Directed "One‐Pot" Strategy to in situ Construct Organic Linkers and Zirconium‐Organic Frameworks

Chao‐Qin Han,Lei Wang,Jincheng Si,Kang Zhou,Xiao‐Yuan Liu

DOI: https://doi.org/10.1002/smll.202402263

IF: 13.3

2024-05-10

Small

Abstract:Inspired by reaction between aldehyde and o‐phenylenediamine, tri‐, tetra‐, penta‐ and hexa‐topic carboxylic acids are synthesized, which are used to construct zirconium‐based metal‐organic frameworks (Zr‐MOFs) via the in situ "one‐pot" strategy. This strategy can be utilized not only to prepare reported Zr‐MOFs, but also to rationally design, construct and realize the functionalities of zirconium‐pentacarboxylate frameworks guided by reticular chemistry. Zirconium‐based metal–organic frameworks (Zr‐MOFs) have emerged as one of the most studied MOFs due to the unlimited numbers of organic linkers and the varying Zr‐oxo clusters. However, the synthesis of carboxylic acids, especially multitopic carboxylic acids, is always a great challenge for the discovery of new Zr‐MOFs. As an alternative approach, the in situ "one‐pot" strategy can address this limitation, where the generation of organic linkers from the corresponding precursors and the sequential construction of MOFs are integrated into one solvothermal condition. Herein, inspired by benzimidazole‐contained compounds synthesized via reaction of aldehyde and o‐phenylenediamine, tri‐, tetra‐, penta‐ and hexa‐topic carboxylic acids and a series of corresponding Zr‐MOFs can be prepared via the in situ "one‐pot" method under the same solvothermal conditions. This strategy can be utilized not only to prepare reported Zr‐MOFs constructed using benzimidazole‐contained linkers, but also to rationally design, construct and realize functionalities of zirconium‐pentacarboxylate frameworks guided by reticular chemistry. More importantly, in situ "one‐pot" method can facilitate the discovery of new Zr‐MOFs, such as zirconium‐hexacarboxylate frameworks. The present study demonstrates the promising potential of benzimidazole‐inspired in situ "one‐pot" approach in the crystal engineering of structure‐ and property‐specific Zr‐MOFs, especially with the guidance of reticular chemistry.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Controlling the Photochromism of Zirconium Pyromellitic Diimide-Based Metal-Organic Frameworks Through Coordinating Solvents

Youcong Li,Jiahao Dong,Yue Zhao,Lei Gao,Yu-Hao Gu,Shuai Yuan

DOI: https://doi.org/10.1039/d4me00104d

IF: 4.92

2024-01-01

Molecular Systems Design & Engineering

Abstract:Metal–organic frameworks (MOFs) are promising platforms for designing photoresponsive materials due to their structural versatility and tunable properties. However, challenges remain in fine-tuning the photoresponsive behavior while maintaining the high...
Small Molecules, Big Effects: Tuning Adsorption and Catalytic Properties of Metal–Organic Frameworks

Xinyao Liu,Kent O. Kirlikovali,Zhijie Chen,Kaikai Ma,Karam B. Idrees,Ran Cao,Xuan Zhang,Timur Islamoglu,Yunling Liu,Omar K. Farha

DOI: https://doi.org/10.1021/acs.chemmater.0c04675

IF: 10.508

2021-01-01

Chemistry of Materials

Abstract:Metal-organic frameworks (MOFs) have emerged as a highly tunable class of porous materials, and in particular, zirconium-based MOFs (Zr-MOFs) have demonstrated the potential to address challenges in a variety of practical applications due to their excellent chemical and thermal stabilities. However, Zr-MOFs are typically synthesized using flammable and toxic organic solvents. An effective, green, scalable route to obtain high-quality Zr-MOFs has yet to be developed as these procedures typically yield Zr-MOFs with relatively lower crystallinities and porosities than those obtained via the former route. Herein, we report the aqueous synthesis of MOF-808, a versatile Zr-MOF, that yields products with high crystallinities and porosities that are comparable to those of solvothermally synthesized MOF-808. We demonstrate that modifying the carboxylic acid-based modulator used in this hydrothermal procedure enables the straightforward tuning of the pore environment in MOF-808. This approach can be leveraged to tune both the water adsorption properties of MOF-808 and the solid-state catalytic performance of MOF-808 toward the hydrolysis of a nerve agent simulant. We anticipate that the insight gained here extends beyond MOF-808 and that it will lead to similar advancements for other Zr-MOFs.
Fast Assembly of Metal Organic Framework UiO-66 in Acid-Base Tunable Deep Eutectic Solvent for the Acetalization of Benzaldehyde and Methanol

Lifang Chen,Xiangzhu Ye,Ting Zhang,Hao Qin,Hongye Cheng,Zhiwen Qi

DOI: https://doi.org/10.3390/molecules27217246

IF: 4.6

2022-10-26

Molecules

Abstract:Zirconium-based metal-organic frameworks (MOFs) have attracted extensive attention owing to their robust stability and facile functionalization. However, they are generally prepared in common volatile solvents within a long reaction time. Here, we introduced environmentally friendly, cheap, and acid-based tunable deep eutectic solvents (DESs) formed from 2-methyl imidazole (MIm) and p-toluenesulfonic acid (PTSA) which significantly accelerated the assembly of zirconium-based MOF (UiO-66) without any aggressive additives. PTSA in acidic DES and ZrOCl2 preliminarily formed Zr(IV) oxo organic acid framework, whereas basic DES completely dissolved the ligand of UiO-66. The strong hydrogen bond effect of PTSA and MIm efficiently accelerated the linker exchange between zirconium oxo organic coordination in acidic DES and benzenedicarboxylate linker in weak basic DES within a reaction time of 2 h at 50 °C. Thus, UiO-66 was quickly assembled with small particle sizes and used as an excellent catalyst for the acetalization of benzaldehyde and methanol. Therefore, the developed synthesis approach provides a new green strategy to quickly prepare and design various structures of metal-based compounds under mild reaction conditions.

chemistry, multidisciplinary,biochemistry & molecular biology
A Zirconium-Based Metal-Organic Framework with Encapsulated Anionic Drug for Uncommonly Controlled Oral Drug Delivery

Ke Jiang,Ling Zhang,Quan Hu,Xin Zhang,Jun Zhang,Yuanjing Cui,Yu Yang,Bin Li,Guodong Qian

DOI: https://doi.org/10.1016/j.micromeso.2018.08.030

IF: 5.876

2018-01-01

Microporous and Mesoporous Materials

Abstract:Oral drug delivery has been recognized as the most common and patient acceptant drug administration. In general, an ideal drug carrier for oral drug delivery should own high drug loading capacity, good biocompatibility, and especially the feature of avoiding drug delivery in stomach (acidic conditions) and promoting the drug release in intestine (neutral conditions). Generally, most of MOFs for drug carriers exhibit the normal pH response in which the drugs are more easily released in acidic condition because of the degradation of the framework or/and the weak host-guest interactions, so they are not suitable for oral drug delivery. Herein, we design and synthesize a new nitrogen heterocycle organic ligand H2QDDA ((2E,2′E)-3,3′-(quinoline-5,8-diyl)diacrylic acid) and use it to construct its first Zr-based MOF (termed as ZJU-802). The anionic drug encapsulated ZJU-802 exhibit an uncommonly reverse pH response due to the incorporation of N sites in which the anionic drugs can be easily released at pH 7.4 while have a negligible release at pH 2.0 due to the enhanced host-guest interactions between the framework and anionic drugs. This reversed drug release is quite suitable for oral drug delivery. Further, high anionic drug loading capacities (>40%), low cytotoxicity and good biocompatibility of ZJU-802 were fully demonstrated by 1H NMR, MTT assay and confocal microscopy imaging.
Control the Structure of Zr-Tetracarboxylate Frameworks Through Steric Tuning.

Jiandong Pang,Shuai Yuan,Junsheng Qin,Caiping Liu,Christina Lollar,Mingyan Wu,Daqiang Yuan,Hong-Cai Zhou,Maochun Hong

DOI: https://doi.org/10.1021/jacs.7b09973

IF: 15

2017-01-01

Journal of the American Chemical Society

Abstract:Ligands with flexible conformations add to the structural diversity of metal-organic frameworks but, at the same time, pose a challenge to structural design and prediction. Representative examples include Zr-tetracarboxylate-based MOFs, which afford assorted structures for a wide range of applications, but also complicate the structural control. Herein, we systematically studied the formation mechanism of a series of (4,8)-connected Zr-tetracarboxylate-based MOFs by altering the substituents on different positions of the organic linkers. Different ligand rotamers give rise to three types of structures with flu, scu, and csq topologies. A combination of experiment and molecular simulation indicate that the steric hindrance of the substituents at different positions dictates the resulting MOF structures. Additionally, the controllable formation of different structures was successfully implemented by a combination of linkers with different steric effects at specific positions.
One-pot Synthesis of Metal–Organic Frameworks with Encapsulated Target Molecules and Their Applications for Controlled Drug Delivery

Haoquan Zheng,Yuning Zhang,Leifeng Liu,Wei Wan,Peng Guo,Andreas M. Nyström,Xiaodong Zou

DOI: https://doi.org/10.1021/jacs.5b11720

IF: 15

2016-01-12

Journal of the American Chemical Society

Abstract:Many medical and chemical applications require target molecules to be delivered in a controlled manner at precise locations. Metal-organic frameworks (MOFs) have high porosity, large surface area, and tunable functionality and are promising carriers for such purposes. Current approaches for incorporating target molecules are based on multistep postfunctionalization. Here, we report a novel approach that combines MOF synthesis and molecule encapsulation in a one-pot process. We demonstrate that large drug and dye molecules can be encapsulated in zeolitic imidazolate framework (ZIF) crystals. The molecules are homogeneously distributed within the crystals, and their loadings can be tuned. We show that ZIF-8 crystals loaded with the anticancer drug doxorubicin (DOX) are efficient drug delivery vehicles in cancer therapy using pH-responsive release. Their efficacy on breast cancer cell lines is higher than that of free DOX. Our one-pot process opens new possibilities to construct multifunctional delivery systems for a wide range of applications.

chemistry, multidisciplinary
A Solvent-Assisted Ligand Exchange Approach Enables Metal-Organic Frameworks with Diverse and Complex Architectures

Dongbo Yu,Qi Shao,Qingjing Song,Jiewu Cui,Yongli Zhang,Bin Wu,Liang Ge,Yan Wang,Yong Zhang,Yongqiang Qin,Robert Vajtai,Pulickel M. Ajayan,Huanting Wang,Tongwen Xu,Yucheng Wu

DOI: https://doi.org/10.1038/s41467-020-14671-9

IF: 16.6

2020-01-01

Nature Communications

Abstract:Unlike inorganic crystals, metal-organic frameworks do not have a well-developed nanostructure library, and establishing their appropriately diverse and complex architectures remains a major challenge. Here, we demonstrate a general route to control metal-organic framework structure by a solvent-assisted ligand exchange approach. Thirteen different types of metal-organic framework structures have been prepared successfully. To demonstrate a proof of concept application, we used the obtained metal-organic framework materials as precursors for synthesizing nanoporous carbons and investigated their electrochemical Na + storage properties. Due to the unique architecture, the one-dimensional nanoporous carbon derived from double-shelled ZnCo bimetallic zeolitic imidazolate framework nanotubes exhibits high specific capacity as well as superior rate capability and cycling stability. Our study offers an avenue for the controllable preparation of well-designed meta-organic framework structures and their derivatives, which would further broaden the application opportunities of metal-organic framework materials.
Macromorphological Control of Zr-Based Metal-Organic Frameworks for Hydrolysis of a Nerve Agent Simulant

Bradley Gibbons,Eric M. Johnson,Mohammad Khurram Javed,Xiaozhou Yang,Amanda J. Morris

DOI: https://doi.org/10.1021/acsami.4c11928

IF: 9.5

2024-09-19

ACS Applied Materials & Interfaces

Abstract:Zirconium-based metal-organic frameworks (MOFs) have become one of the most promising materials for the adsorption and destruction of chemical warfare agents. While numerous studies have shown differences in reactivity based on MOF topology and postsynthetic modification, the understanding of how modifying MOF macromorphology is less understood. MOF xerogels demonstrate modified defect levels and larger porosity, which increase the number of and access to potential active sites. Indeed, UiO-66...

materials science, multidisciplinary,nanoscience & nanotechnology

Mechanized azobenzene-functionalized zirconium metal-organic framework for on-command cargo release

Dual-Stimulus-Triggered Programmable Drug Release and Luminescent Ratiometric Ph Sensing from Chemically Stable Biocompatible Zinc Metal-Organic Framework.

Controlled Zn2+-Triggered Drug Release by Preferred Coordination of Open Active Sites Within Functionalization Indium Metal Organic Frameworks.

An Ultrastable Metal–Organic Framework with Open Coordinated Sites Realizing Selective Separation Toward Cationic Dyes in Aqueous Solution

Pore Surface Engineering with Controlled Loadings of Functional Groups Via Click Chemistry in Highly Stable Metal-Organic Frameworks

Systematic Engineering of Single Substitution in Zirconium Metal-Organic Frameworks Toward High-Performance Catalysis.

Creating Well-Defined Hexabenzocoronene In Zirconium Metal-Organic Framework By Postsynthetic Annulation

Strongly Lewis Acidic Metal-Organic Frameworks For Continuous Flow Catalysis

Tuning the Ionicity of Stable Metal–Organic Frameworks Through Ionic Linker Installation

Ligand-Directed Conformational Control over Porphyrinic Zirconium Metal–Organic Frameworks for Size-Selective Catalysis

Reticular Chemistry and In Situ "One‐Pot" Strategy: A Dream Combination to Construct Metal–Organic Frameworks

Flexible Zirconium Metal‐Organic Frameworks As Bioinspired Switchable Catalysts

Reticular Chemistry Directed "One‐Pot" Strategy to in situ Construct Organic Linkers and Zirconium‐Organic Frameworks

Controlling the Photochromism of Zirconium Pyromellitic Diimide-Based Metal-Organic Frameworks Through Coordinating Solvents

Small Molecules, Big Effects: Tuning Adsorption and Catalytic Properties of Metal–Organic Frameworks

Fast Assembly of Metal Organic Framework UiO-66 in Acid-Base Tunable Deep Eutectic Solvent for the Acetalization of Benzaldehyde and Methanol

A Zirconium-Based Metal-Organic Framework with Encapsulated Anionic Drug for Uncommonly Controlled Oral Drug Delivery

Control the Structure of Zr-Tetracarboxylate Frameworks Through Steric Tuning.

One-pot Synthesis of Metal–Organic Frameworks with Encapsulated Target Molecules and Their Applications for Controlled Drug Delivery

A Solvent-Assisted Ligand Exchange Approach Enables Metal-Organic Frameworks with Diverse and Complex Architectures

Macromorphological Control of Zr-Based Metal-Organic Frameworks for Hydrolysis of a Nerve Agent Simulant